Eaton m112 supercharger on 2001 cobra? Help me!

xSVTx Cobra x · June 30th, 2009, 02:21 AM

Hey ppl, im looking for some more hp bc the stock is not cutting it anymore, i would greatly appreciate anyone wo can tell me everythiong i need for this to work on my car. Please!

Safi · June 30th, 2009, 02:48 AM

Here you go

03-04 Eaton blower on 99&01 - SVTPerformance

Reloaded · June 30th, 2009, 02:34 PM

Here too:

Eaton Swap..... - 2003-04 Mach 1 Registry Owners Club

Short remark about putting that supercharger on a Cobra/Mach... You're going to need A LOT of parts.

Scott2001GT · June 30th, 2009, 04:26 PM

buy a used KB..?

RS22 · June 30th, 2009, 07:27 PM

that looks like a fuck load of stuff you'll need to do an eaton swap. If you are forced to buy that many parts why not just upgrade to a KB or Whipple? You are going to spend a lot of money and time on this so get more bang for your buck.

Reloaded · June 30th, 2009, 08:10 PM

Because a KB kit is much more expensive than going with the Eaton swap for as many parts as there are. And because a stock 99-01 Cobra / Mach 1 long block aren't going to handle anything bigger than a 1.7 KB anyway. Plus once you do the swap, and you build your engine then all you have to buy is the KB or Whipple for an 03/04 Cobra and you're good to go (minus obvious other supporting mods.)

xSVTx Cobra x · June 30th, 2009, 10:48 PM

thnx everyone. very helpful. and i was wondering if any knows if i can just go online and buy these parts i nedd on a website, or do i need to hunt for private sellers?

Safi · June 30th, 2009, 11:49 PM

Private sellers would be the way to go to keep it on the cheap. Head over to SVTP...alot of those guys are selling the parts you would need

xSVTx Cobra x · July 1st, 2009, 02:31 AM

thnx very much, i greatly appreciate all of your help.

Reloaded · July 1st, 2009, 12:28 PM

Yeah there's a guy selling an almost complete kit on the Mach1registry as well as SVTP.

xSVTx Cobra x · July 1st, 2009, 03:06 PM

im kinda dumb so i cant find those forums, can sum1 tell me.

Reloaded · July 1st, 2009, 06:10 PM

Here's a couple to check out:

Eaton swap set up $1,800 - 2003-04 Mach 1 Registry Owners Club

Eaton swap 03 longblock 04 built longblock - SVTPerformance

xSVTx Cobra x · July 2nd, 2009, 02:50 AM

thnx

June 30th, 2009, 02:21 AM	#1
xSVTx Cobra x Regular 2001 Cobra Join Date: May 2009 Location: Strong Island Posts: 93	Eaton m112 supercharger on 2001 cobra? Help me! Hey ppl, im looking for some more hp bc the stock is not cutting it anymore, i would greatly appreciate anyone wo can tell me everythiong i need for this to work on my car. Please!

June 30th, 2009, 02:48 AM	#2
Safi MM's Resident Leghumper 2007 Mustang GT 14.6 for my rookie first run ass Join Date: Apr 2008 Location: Luke AFB Arizona Posts: 2,550	Here you go 03-04 Eaton blower on 99&01 - SVTPerformance __________________ Mods: AIRAID, GT500 spoiler, BMR springs, Adj Panhard Rod....haha, wow I suck Professor Burnin Military Crew E-4 (SrA) JAKE'S PIITB CREW MEMBER#2 LACEY'S TIOTB CREW: FOUNDER

June 30th, 2009, 04:26 PM	#4
Scott2001GT MM Fanatic 2001 Mustang GT 13.874 Join Date: Mar 2008 Location: Missouri Posts: 3,190	buy a used KB..? __________________ Silver Vehicle Club Member #7 SLP LM1 w/ O/R Mac Prochamber Ford Racing 4:10s SCT X3 Tuner JLT cai Black FR500's 18x10 & 18x9 wrapped it Nitto 555's! and some visual Fuck ya it's a 4R70W

June 30th, 2009, 07:27 PM	#5
RS22 Regular 2003 Mustang Cobra Join Date: Feb 2009 Location: East Bay, CA Posts: 122	that looks like a fuck load of stuff you'll need to do an eaton swap. If you are forced to buy that many parts why not just upgrade to a KB or Whipple? You are going to spend a lot of money and time on this so get more bang for your buck. __________________ 2003 SB Mustang Cobra \| MGW STS \| Spintech 333SCS mufflers \| MAC O/R H-pipe \| JLT CAI \| H&R Sport Springs \| MM Front Isos/Stock Rear Isos \| MM Caster Camber plates \| Spintech FLSFCs \| 18x9/10.5 Chrome Saleen Replicas \| S3 Roush kit

June 30th, 2009, 10:48 PM	#7
xSVTx Cobra x Regular 2001 Cobra Join Date: May 2009 Location: Strong Island Posts: 93	thnx everyone. very helpful. and i was wondering if any knows if i can just go online and buy these parts i nedd on a website, or do i need to hunt for private sellers? __________________ Engine Block Machining!?!?! http://www.moddedmustangs.com/forums...ml#post2357231

Sponsored Links	Remove Advertisements
Forums at Modded Mustangs Advertisement

June 30th, 2009, 11:49 PM	#8
Safi MM's Resident Leghumper 2007 Mustang GT 14.6 for my rookie first run ass Join Date: Apr 2008 Location: Luke AFB Arizona Posts: 2,550	Private sellers would be the way to go to keep it on the cheap. Head over to SVTP...alot of those guys are selling the parts you would need __________________ Mods: AIRAID, GT500 spoiler, BMR springs, Adj Panhard Rod....haha, wow I suck Professor Burnin Military Crew E-4 (SrA) JAKE'S PIITB CREW MEMBER#2 LACEY'S TIOTB CREW: FOUNDER

July 1st, 2009, 02:31 AM	#9
xSVTx Cobra x Regular 2001 Cobra Join Date: May 2009 Location: Strong Island Posts: 93	thnx very much, i greatly appreciate all of your help. __________________ Engine Block Machining!?!?! http://www.moddedmustangs.com/forums...ml#post2357231

July 1st, 2009, 03:06 PM	#11
xSVTx Cobra x Regular 2001 Cobra Join Date: May 2009 Location: Strong Island Posts: 93	im kinda dumb so i cant find those forums, can sum1 tell me. __________________ Engine Block Machining!?!?! http://www.moddedmustangs.com/forums...ml#post2357231

July 2nd, 2009, 02:50 AM	#13
xSVTx Cobra x Regular 2001 Cobra Join Date: May 2009 Location: Strong Island Posts: 93	thnx __________________ Engine Block Machining!?!?! http://www.moddedmustangs.com/forums...ml#post2357231

Threads Similar to: Eaton m112 supercharger on 2001 cobra? Help me!
Thread	Thread Starter	Forum	Replies	Last Post
Eaton M112 on 97 Cobra	Gomer97	4V / SVT	21	December 29th, 2008 08:26 PM
03-04 Cobra Eaton Supercharger on your 2V	White99stang	99-04	113	September 11th, 2008 09:42 PM
03-04 cobra eaton supercharger for my 04 mach 1	Saleenwolf720	99-04	16	April 14th, 2007 05:25 PM
03-04 cobra eaton supercharger	noob	99-04	15	April 6th, 2007 03:34 AM
Will An Eaton M112 Supercharger Fit On My GT?	phisherize	99-04	6	November 16th, 2006 06:54 AM

All times are GMT -4. The time now is 03:02 AM.
Contact Us - Modded Mustangs - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2009, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.