stock terminator rwhp

99blkcobra · August 30th, 2009, 12:14 PM

Originally Posted by 03svtcobra

i dynoed 336!!!

336???

what that sucks.........

wanna trade cars?

not

03svtcobra · August 30th, 2009, 12:24 PM

lol i see mods coming fast....

99blkcobra · August 30th, 2009, 12:27 PM

Originally Posted by 03svtcobra

lol i see mods coming fast....

hope u do, i need heads and cams, then juice it up

03svtcobra · August 30th, 2009, 12:31 PM

i'm getting a 2.8 pulley asap. can termi's hold the extra 4psi? lol then cams, headers, intercooler, throttle body an kb or whipple one

1StockGT · August 30th, 2009, 01:52 PM

You'll need a tune, unless you want to add a new motor to you list of mods. Mine is putting down 517rwhp/505rwtq. I have a Steig stage 4 port, BF 2.76 pully and idlers set, Borla Stingers, Magnaflow tru-x, KB BAP, Accufab t/b and plenum, JLT cai, and dyno tuned with a predator. My afr is in the low 10s, the tuner said it's better to be safe than sorry.

I'm not sure if you've looked at the price of cams for the 4v, but you may move them further down your list once you do. I'd like to get a set for mine, but they are quite pricey.

Smoothgrandmama · August 30th, 2009, 01:57 PM

Originally Posted by 03svtcobra

i dynoed 336!!!

Did you take the eaton off for the dyno run? lol

03svtcobra · August 30th, 2009, 02:00 PM

Originally Posted by Smoothgrandmama

Did you take the eaton off for the dyno run? lol

lol i must have but i did break the dyno the run before that lol so those numbers maybe wrong lol i have tuner so cams sound be no problem

TheUNZippee! · August 31st, 2009, 07:10 PM

I dyno'd 282!

Represent

nutnbutcustm · September 4th, 2009, 12:53 AM

my 01' cobra with cams,full magna flow exhaust,jlp intake,tune and 93 octane did 337? and i have a full termi swap sittin here.....maybe i shouldnt swap???

1StockGT · September 4th, 2009, 08:59 AM

Originally Posted by nutnbutcustm

my 01' cobra with cams,full magna flow exhaust,jlp intake,tune and 93 octane did 337? and i have a full termi swap sittin here.....maybe i shouldnt swap???

He did say there was a problem with the dyno. I'm sure it will dyno higher with a good dyno.

BoostFiend · September 5th, 2009, 01:01 AM

Originally Posted by 1StockGT

You'll need a tune, unless you want to add a new motor to you list of mods. Mine is putting down 517rwhp/505rwtq. I have a Steig stage 4 port, BF 2.76 pully and idlers set, Borla Stingers, Magnaflow tru-x, KB BAP, Accufab t/b and plenum, JLT cai, and dyno tuned with a predator. My afr is in the low 10s, the tuner said it's better to be safe than sorry.

I'm not sure if you've looked at the price of cams for the 4v, but you may move them further down your list once you do. I'd like to get a set for mine, but they are quite pricey.

Holy crap, low 10's afr is rich as shit. Thats not safe thats wasting fuel. lol Good numbers for that conservative of a tune however.

terrminatted · September 5th, 2009, 09:17 AM

Originally Posted by bbk03gt24

465 or 365?

LOL I was just messing with ya'll. I have never had it on a dyno. Hopefully when I throw a pulley on it, I can get it on the dyno soon after.

Cricket · September 5th, 2009, 10:30 AM

Originally Posted by terrminatted

LOL I was just messing with ya'll. I have never had it on a dyno. Hopefully when I throw a pulley on it, I can get it on the dyno soon after.

no...not hopefully. You better, or you better have a canned tune ready to upload.

KJ04SVT · September 13th, 2009, 10:16 AM

When I had my 04 Term dyno'd at HPP ,it dyno'd at 419 rwhp 387 RWTQ stock trim. After 2.76 upper with CIA, Bassani full exhaust put down 467 RWHP 468 RWQT.

August 30th, 2009, 12:24 PM	#42
03svtcobra Enthusiast 2003 svt cobra Join Date: Jul 2009 Location: Hartselle, AL Posts: 753	lol i see mods coming fast.... __________________ 03' svt cobra 87' lx foxbody 86' iroc camaro (first car & DD if it'll stay running for more than 2 days) Ever get a bad feeling in your stomach? Don't know what I mean. Eat taco bell and wait 20 minutes. MM Cobra Club #37

August 30th, 2009, 12:31 PM	#44
03svtcobra Enthusiast 2003 svt cobra Join Date: Jul 2009 Location: Hartselle, AL Posts: 753	i'm getting a 2.8 pulley asap. can termi's hold the extra 4psi? lol then cams, headers, intercooler, throttle body an kb or whipple one __________________ 03' svt cobra 87' lx foxbody 86' iroc camaro (first car & DD if it'll stay running for more than 2 days) Ever get a bad feeling in your stomach? Don't know what I mean. Eat taco bell and wait 20 minutes. MM Cobra Club #37

August 31st, 2009, 07:10 PM	#48
TheUNZippee! Moderator 2007 Mustang GT 282 rwhp/292 rwtq Join Date: Jan 2007 Location: Canada Posts: 26,479	I dyno'd 282! Represent __________________ Team Ricer GT's Co-Founder Dan: NOT A PROBLEM. Crew Founder

September 13th, 2009, 10:16 AM	#54
KJ04SVT Newbie 2004 SVT Cobra 2.76 Billet Pulley 467RWHP 468 RWTQ Tuned by HPP Racing Join Date: Aug 2008 Location: The Colony, Texas Posts: 14	When I had my 04 Term dyno'd at HPP ,it dyno'd at 419 rwhp 387 RWTQ stock trim. After 2.76 upper with CIA, Bassani full exhaust put down 467 RWHP 468 RWQT. __________________ Kevin Jones The Colony, Texas "If at first you don’t succeed, destroy all evidence that you tried".....

Threads Similar to: stock terminator rwhp
Thread	Thread Starter	Forum	Replies	Last Post
Terminator + Twin Turbo + Eaton SC= 1,188 rwhp/1,015 rwtq	altwairqi	4V / SVT	7	February 25th, 2009 01:07 PM
most rwhp on a stock 3.8 auto?	tigerfan2771	V6 Mustangs	21	June 29th, 2008 08:31 PM
702 rwhp stock block	baine21225	5.0 Mustangs	19	February 21st, 2008 03:56 PM
Stock Rwhp	pilot37	V6 Mustangs	12	December 17th, 2007 10:55 PM
How much rwhp do Terminators have stock?	Compy386	The Clubhouse	4	February 7th, 2007 10:16 AM

Sponsored Links	Remove Advertisements
Forums at Modded Mustangs Advertisement

August 30th, 2009, 01:52 PM	#45
1StockGT Enthusiast 2003 Cobra Join Date: Nov 2005 Location: Newport News,VA Posts: 629	You'll need a tune, unless you want to add a new motor to you list of mods. Mine is putting down 517rwhp/505rwtq. I have a Steig stage 4 port, BF 2.76 pully and idlers set, Borla Stingers, Magnaflow tru-x, KB BAP, Accufab t/b and plenum, JLT cai, and dyno tuned with a predator. My afr is in the low 10s, the tuner said it's better to be safe than sorry. I'm not sure if you've looked at the price of cams for the 4v, but you may move them further down your list once you do. I'd like to get a set for mine, but they are quite pricey.

September 4th, 2009, 12:53 AM	#49
nutnbutcustm Regular 2001 Cobra/03'termi swap ...@..... Join Date: Sep 2007 Location: Houston,TX Posts: 169	my 01' cobra with cams,full magna flow exhaust,jlp intake,tune and 93 octane did 337? and i have a full termi swap sittin here.....maybe i shouldnt swap???

All times are GMT -4. The time now is 11:22 AM.
Contact Us - Modded Mustangs - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2010, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.