Stock mufflers on SN95 Cobra?

Muscletang · August 28th, 2009, 06:07 PM

I don't have my stock mufflers in town with me to look at them. Are they 40 series Flowmaster? I've tried to find the answer and found one place say they are a 3 chambered Flowmaster muffler stock. Is this true?

I'm going to be replacing my Magnaflow mufflers with a set of either 40 series or single chambered Flows before long and I'm trying to see if I can save myself some money by using the stockers.

Thanks!

Lefty · August 28th, 2009, 06:19 PM

As far as I know, it's Ford's muffler. Not flowmaster.

Safi · August 28th, 2009, 06:20 PM

Would they be the same as 99 cobra's?

I still have my stockers here

Muscletang · August 28th, 2009, 06:21 PM

The reason I ask is they are stamped Flowmaster. I don't have them with me to look at everything on them though.

Muscletang · August 28th, 2009, 06:22 PM

Originally Posted by commandersafi

Would they be the same as 99 cobra's?

I still have my stockers here

Not sure.

Lefty · August 28th, 2009, 06:27 PM

If they're stamped flowmaster then somebody def. welded them in. Is it a "boxy" looking muffler? The stockers were a round shaped muffler...

Muscletang · August 28th, 2009, 07:29 PM

They are rounded but I think they say Flowmaster on them. I could definitely be wrong though. I'm going back to the Richmond area where I have them next weekend and I'll take a look then. Thanks for the assistance!

Lefty · August 28th, 2009, 08:40 PM

Anytime Chad

Mustang RacR94 · August 30th, 2009, 11:14 AM

no they did not come stock with flowmaster 40s for sure

Muscletang · August 30th, 2009, 03:05 PM

Cool. Thanks man. They must have been welded in if my memory serves me correctly on them saying flowmaster on them. I'll have to take a look at the mufflers later this week and see what I have to work with. *hopefully some flows*

Thanks again.

Lefty · August 30th, 2009, 04:37 PM

Weld in some Mac flowpaths!

PS - I responded to your PM; sorry it took me some time...

ReverendDexter · August 30th, 2009, 04:48 PM

I'm 99.9% certain that the stock mufflers were not Flowmasters. Near as I know, the only aftermarket company that's ever had their mufflers installed as part of a production run was Bassani for the '00 Cobra R.

Chris951 · August 30th, 2009, 11:57 PM

Originally Posted by Lefty

Weld in some Mac flowpaths!

Mustang RacR94 · August 31st, 2009, 09:31 AM

wasnt it borla on the 2000 cobra R?

acidtonic · August 31st, 2009, 09:52 AM

I know the catback is different for the IRS Cobras.

My 97 Cobra has no stamping for flowmaster.

Lefty · August 31st, 2009, 10:26 AM

Originally Posted by Mustang RacR94

wasnt it borla on the 2000 cobra R?

Borla is ringing a bell for me too...

acidtonic · August 31st, 2009, 01:05 PM

Bassani I believe. Without googling it because I'm busy at work just popping in to check my threads, I remember seeing Bassani on the list of aftermarket companies that supplied parts.

Lefty · August 31st, 2009, 01:44 PM

I know it starts with a "B"

August 28th, 2009, 06:07 PM	#1
Muscletang Hardcore Enthusiast 1997 SVT Cobra Join Date: Sep 2007 Location: Chesapeake, VA Posts: 2,221 iTrader: 1 reviews	Stock mufflers on SN95 Cobra? I don't have my stock mufflers in town with me to look at them. Are they 40 series Flowmaster? I've tried to find the answer and found one place say they are a 3 chambered Flowmaster muffler stock. Is this true? I'm going to be replacing my Magnaflow mufflers with a set of either 40 series or single chambered Flows before long and I'm trying to see if I can save myself some money by using the stockers. Thanks! __________________ Last edited by Muscletang; August 28th, 2009 at 06:11 PM.

August 28th, 2009, 06:19 PM	#2
Lefty Resident DJ '01 Cobra Vert. Join Date: Jun 2007 Location: Mechanicsburg, PA Posts: 28,697 iTrader: 12 reviews	As far as I know, it's Ford's muffler. Not flowmaster. __________________ 2008 Acura TL Type-S (the daily) 2006 Yamaha R6 50th Anniversary Edition (the other toy)

August 28th, 2009, 06:21 PM	#4
Muscletang Hardcore Enthusiast 1997 SVT Cobra Join Date: Sep 2007 Location: Chesapeake, VA Posts: 2,221 iTrader: 1 reviews	The reason I ask is they are stamped Flowmaster. I don't have them with me to look at everything on them though. __________________

August 28th, 2009, 06:27 PM	#6
Lefty Resident DJ '01 Cobra Vert. Join Date: Jun 2007 Location: Mechanicsburg, PA Posts: 28,697 iTrader: 12 reviews	If they're stamped flowmaster then somebody def. welded them in. Is it a "boxy" looking muffler? The stockers were a round shaped muffler... __________________ 2008 Acura TL Type-S (the daily) 2006 Yamaha R6 50th Anniversary Edition (the other toy)

August 28th, 2009, 07:29 PM	#7
Muscletang Hardcore Enthusiast 1997 SVT Cobra Join Date: Sep 2007 Location: Chesapeake, VA Posts: 2,221 iTrader: 1 reviews	They are rounded but I think they say Flowmaster on them. I could definitely be wrong though. I'm going back to the Richmond area where I have them next weekend and I'll take a look then. Thanks for the assistance! __________________ Last edited by Muscletang; August 28th, 2009 at 07:40 PM.

August 28th, 2009, 08:40 PM	#8
Lefty Resident DJ '01 Cobra Vert. Join Date: Jun 2007 Location: Mechanicsburg, PA Posts: 28,697 iTrader: 12 reviews	Anytime Chad __________________ 2008 Acura TL Type-S (the daily) 2006 Yamaha R6 50th Anniversary Edition (the other toy)

August 30th, 2009, 11:14 AM	#9
Mustang RacR94 MM Fanatic 99 cobra N/A Join Date: Dec 2006 Location: Fayetteville NC Posts: 3,169 iTrader: 0 reviews	no they did not come stock with flowmaster 40s for sure __________________ 99 Cobra 03 Cobra motor AFCO H/E Pulley JLT CAI BBK L/T off road H/steeda catback SCT MAF Tune 03 cobra pumps HVGC

August 30th, 2009, 03:05 PM	#10
Muscletang Hardcore Enthusiast 1997 SVT Cobra Join Date: Sep 2007 Location: Chesapeake, VA Posts: 2,221 iTrader: 1 reviews	Cool. Thanks man. They must have been welded in if my memory serves me correctly on them saying flowmaster on them. I'll have to take a look at the mufflers later this week and see what I have to work with. hopefully some flows Thanks again. __________________

August 30th, 2009, 04:37 PM	#11
Lefty Resident DJ '01 Cobra Vert. Join Date: Jun 2007 Location: Mechanicsburg, PA Posts: 28,697 iTrader: 12 reviews	Weld in some Mac flowpaths! PS - I responded to your PM; sorry it took me some time... __________________ 2008 Acura TL Type-S (the daily) 2006 Yamaha R6 50th Anniversary Edition (the other toy)

August 30th, 2009, 04:48 PM	#12
ReverendDexter Priest of the Car Gods Clapped-out '90 GT 'vert ~5.5 seconds off TTOD :( Join Date: Jan 2007 Location: Rohnert Park, CA Posts: 13,808 iTrader: 0 reviews	I'm 99.9% certain that the stock mufflers were not Flowmasters. Near as I know, the only aftermarket company that's ever had their mufflers installed as part of a production run was Bassani for the '00 Cobra R. __________________ O o /¯/______________________ \|BLAAAAAAAAAAAAAAAAAAAAAAAAARGH!!! \_\

August 31st, 2009, 09:31 AM	#14
Mustang RacR94 MM Fanatic 99 cobra N/A Join Date: Dec 2006 Location: Fayetteville NC Posts: 3,169 iTrader: 0 reviews	wasnt it borla on the 2000 cobra R? __________________ 99 Cobra 03 Cobra motor AFCO H/E Pulley JLT CAI BBK L/T off road H/steeda catback SCT MAF Tune 03 cobra pumps HVGC

August 31st, 2009, 09:52 AM	#15
acidtonic Hardcore Enthusiast 97 Cobra Join Date: May 2008 Location: Royal Oak Michigan Posts: 1,056 iTrader: 0 reviews	I know the catback is different for the IRS Cobras. My 97 Cobra has no stamping for flowmaster. __________________ Converted to the Dark Side. 06 Apex Silver Evolution IX GSR - Turboback Exhaust, Tune - Wideband O2, Trustz backlight gauges, Apexi turbo timer - Stock wing, but soon to be wingless. - Guessing 280-310 at the wheels. 02 Red Escape V6 4x4

August 31st, 2009, 01:05 PM	#17
acidtonic Hardcore Enthusiast 97 Cobra Join Date: May 2008 Location: Royal Oak Michigan Posts: 1,056 iTrader: 0 reviews	Bassani I believe. Without googling it because I'm busy at work just popping in to check my threads, I remember seeing Bassani on the list of aftermarket companies that supplied parts. __________________ Converted to the Dark Side. 06 Apex Silver Evolution IX GSR - Turboback Exhaust, Tune - Wideband O2, Trustz backlight gauges, Apexi turbo timer - Stock wing, but soon to be wingless. - Guessing 280-310 at the wheels. 02 Red Escape V6 4x4

August 31st, 2009, 01:44 PM	#18
Lefty Resident DJ '01 Cobra Vert. Join Date: Jun 2007 Location: Mechanicsburg, PA Posts: 28,697 iTrader: 12 reviews	I know it starts with a "B" __________________ 2008 Acura TL Type-S (the daily) 2006 Yamaha R6 50th Anniversary Edition (the other toy)

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

Threads Similar to: Stock mufflers on SN95 Cobra?
Thread	Thread Starter	Forum	Replies	Last Post
Stock mufflers	wveil3v	2005 - 2010	5	May 29th, 2009 11:42 AM
stock GT mufflers.	t3hlulzkiller	2005 - 2010	17	December 10th, 2008 04:12 PM
Anyone know what the stock GT mufflers are worth?	06Black5spdGT	2005 - 2010	9	September 5th, 2008 11:02 PM
04 cobra in sn95	Nossit	5.0 Mustangs	45	May 15th, 2008 02:51 PM

All times are GMT -4. The time now is 01:58 PM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.