And so it begins.....

Smoothgrandmama · December 28th, 2009, 12:31 AM

How to pull an engine from an 03 cobra in picture form.

And the crew.....

This may seem kinda vague.....But I'm tired

SWEET2KSTANG · December 28th, 2009, 12:32 AM

motor let go on you?

Smoothgrandmama · December 28th, 2009, 12:40 AM

Not yet...just got the next one in...So I figured it's time...This longblock with ported heads will be for sale. $2500

albeit it does have low compression on the pass side

Smoothgrandmama · December 28th, 2009, 11:10 PM

Hmmm who wants to help finish this

Lefty · December 28th, 2009, 11:26 PM

I will if you give me the long block.

Imran · December 28th, 2009, 11:37 PM

I will if you give me the long block.

Seriously. I mean i already live in texas.

wraitherx · December 28th, 2009, 11:55 PM

hey smooth, where did you get the brackets from? Also what did you mount the rear chains on. on mine i had to attach the chains to the alternator bolts holes and the top bell housing bolts. Nice job too.

Safi · December 29th, 2009, 03:34 AM

Hey you asshole...you was supposed to let me know when you did this

Smoothgrandmama · December 29th, 2009, 04:43 PM

Well inma start back up in 2 weeks

AzSonicSnake · December 29th, 2009, 04:47 PM

looks like some good times...

Scott2001GT · December 29th, 2009, 07:57 PM

what are you droping back into it?

G.T. Rags · December 29th, 2009, 08:01 PM

Originally Posted by Scott2001GT

what are you droping back into it?

a hamster

HMUSN · December 29th, 2009, 08:05 PM

Originally Posted by Scott2001GT

what are you droping back into it?

A 2JZ

C MY 4D · December 29th, 2009, 08:07 PM

Originally Posted by wraitherx

hey smooth, where did you get the brackets from? Also what did you mount the rear chains on. on mine i had to attach the chains to the alternator bolts holes and the top bell housing bolts. Nice job too.

I use a load leveler and use the intake bolt holes to mount the chains... but that's usually after it has been dropped out the bottom.

Smoothgrandmama · December 29th, 2009, 08:58 PM

Originally Posted by wraitherx

hey smooth, where did you get the brackets from? Also what did you mount the rear chains on. on mine i had to attach the chains to the alternator bolts holes and the top bell housing bolts. Nice job too.

Brackets band with load leveler. I bolted the back into the the block i just fliped the bolt around when i pulled it out of the tranny. The front is bolted to the top of the heads

BWAL · December 29th, 2009, 09:18 PM

you wouldn't want to just sell the bottom end, would you?

Scott2001GT · December 30th, 2009, 02:02 AM

Originally Posted by G.T. Rags

a hamster

Originally Posted by HMUSN

A 2JZ

what if he could fit BOTH

Smoothgrandmama · December 30th, 2009, 06:37 PM

Im going back in another longblock that has stage 2 comp cams and springs

Scott2001GT · December 30th, 2009, 06:40 PM

oh nice! so no hampster?

wraitherx · December 30th, 2009, 06:41 PM

Originally Posted by Smoothgrandmama

Im going back in another longblock that has stage 2 comp cams and springs

You'll like the comps. I love mine

December 28th, 2009, 12:31 AM	#1
Smoothgrandmama Assistant to the Manager 12 GT 8.46@88 1/8 Join Date: Apr 2007 Location: Willis,Texas Posts: 7,136 iTrader: 6 reviews	And so it begins..... How to pull an engine from an 03 cobra in picture form. And the crew..... This may seem kinda vague.....But I'm tired __________________ Join The MM Facebook: Modded Mustangs Facebook Vote For Modded Mustangs Ride of the Month Eskimo Brothers To Smooth: Safi, Blitz34, Graystang01, WillTheThrill, Bwal, 101Fng

December 28th, 2009, 12:32 AM	#2
SWEET2KSTANG mm's nitrous mod 2000 mustang gt 11.79@115.83 (old set up) Join Date: Oct 2006 Location: N.W. AR Posts: 12,540 iTrader: 8 reviews	motor let go on you? __________________ project warhorse under construction wagon burner under construction as well (04 lightning) being built by MP2 Performance

December 28th, 2009, 12:40 AM	#3
Smoothgrandmama Assistant to the Manager 12 GT 8.46@88 1/8 Join Date: Apr 2007 Location: Willis,Texas Posts: 7,136 iTrader: 6 reviews	Not yet...just got the next one in...So I figured it's time...This longblock with ported heads will be for sale. $2500 albeit it does have low compression on the pass side __________________ Join The MM Facebook: Modded Mustangs Facebook Vote For Modded Mustangs Ride of the Month Eskimo Brothers To Smooth: Safi, Blitz34, Graystang01, WillTheThrill, Bwal, 101Fng

December 28th, 2009, 11:10 PM	#4
Smoothgrandmama Assistant to the Manager 12 GT 8.46@88 1/8 Join Date: Apr 2007 Location: Willis,Texas Posts: 7,136 iTrader: 6 reviews	Hmmm who wants to help finish this __________________ Join The MM Facebook: Modded Mustangs Facebook Vote For Modded Mustangs Ride of the Month Eskimo Brothers To Smooth: Safi, Blitz34, Graystang01, WillTheThrill, Bwal, 101Fng

December 28th, 2009, 11:26 PM	#5
Lefty Resident DJ '01 Cobra Vert. Join Date: Jun 2007 Location: Mechanicsburg, PA Posts: 28,699 iTrader: 12 reviews	I will if you give me the long block. __________________ 2008 Acura TL Type-S (the daily) 2006 Yamaha R6 50th Anniversary Edition (the other toy)

December 28th, 2009, 11:37 PM	#6
Imran :) 01 Join Date: Dec 2007 Posts: 10,795 iTrader: 1 reviews	I will if you give me the long block. Seriously. I mean i already live in texas. __________________

December 28th, 2009, 11:55 PM	#7
wraitherx Moderator '99 SVT Cobra Join Date: Nov 2006 Location: Virginia Beach, VA Posts: 9,568 iTrader: 11 reviews	hey smooth, where did you get the brackets from? Also what did you mount the rear chains on. on mine i had to attach the chains to the alternator bolts holes and the top bell housing bolts. Nice job too. __________________ BUILD 2 IN PROGRESS

December 29th, 2009, 04:43 PM	#9
Smoothgrandmama Assistant to the Manager 12 GT 8.46@88 1/8 Join Date: Apr 2007 Location: Willis,Texas Posts: 7,136 iTrader: 6 reviews	Well inma start back up in 2 weeks __________________ Join The MM Facebook: Modded Mustangs Facebook Vote For Modded Mustangs Ride of the Month Eskimo Brothers To Smooth: Safi, Blitz34, Graystang01, WillTheThrill, Bwal, 101Fng

December 29th, 2009, 04:47 PM	#10
AzSonicSnake 2009 ROTY 2003 SVT Cobra 11.07@127 Join Date: Aug 2008 Location: North Phoenix,AZ Posts: 5,640 iTrader: 1 reviews	looks like some good times... __________________ MM Cobra Club #25 My Autolog Profile

December 29th, 2009, 07:57 PM	#11
Scott2001GT BYAHHHH! 2001 Mustang GT 13.874 Join Date: Mar 2008 Location: Missouri Posts: 14,793 Blog Entries: 1 iTrader: 3 reviews	what are you droping back into it? __________________ Precision Turbo\|TurboSmart\|TeamZ\|Strange\|Hellion\|BBK\|SCT\|Edge Converters\|Fairbanks\|CG Fabrications\|Treadstone

December 29th, 2009, 09:18 PM	#16
BWAL MSTRB8N & MDR8N 2021 Mustang V15 Quad Turbo with nawz Join Date: Nov 2006 Location: On The Shaft Posts: 19,656 Blog Entries: 2 iTrader: 4 reviews	you wouldn't want to just sell the bottom end, would you? __________________ MM 1 am boner crew Cars and mod list in garage i like veiny meat sliding between my buttcheeks

December 30th, 2009, 06:37 PM	#18
Smoothgrandmama Assistant to the Manager 12 GT 8.46@88 1/8 Join Date: Apr 2007 Location: Willis,Texas Posts: 7,136 iTrader: 6 reviews	Im going back in another longblock that has stage 2 comp cams and springs __________________ Join The MM Facebook: Modded Mustangs Facebook Vote For Modded Mustangs Ride of the Month Eskimo Brothers To Smooth: Safi, Blitz34, Graystang01, WillTheThrill, Bwal, 101Fng

December 30th, 2009, 06:40 PM	#19
Scott2001GT BYAHHHH! 2001 Mustang GT 13.874 Join Date: Mar 2008 Location: Missouri Posts: 14,793 Blog Entries: 1 iTrader: 3 reviews	oh nice! so no hampster? __________________ Precision Turbo\|TurboSmart\|TeamZ\|Strange\|Hellion\|BBK\|SCT\|Edge Converters\|Fairbanks\|CG Fabrications\|Treadstone

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

Threads Similar to: And so it begins.....
Thread	Thread Starter	Forum	Replies	Last Post
So it begins...	Zatrekaz	General Car Care & Detailing	100	December 30th, 2009 12:23 PM
And so it begins....	xtremes10	The Clubhouse	10	December 2nd, 2009 07:53 PM
So it begins...	Zatrekaz	The Clubhouse	19	August 16th, 2009 04:30 PM
and so it begins	Dennis	The Clubhouse	45	October 28th, 2008 09:32 AM
And So It Begins...	T&T	2005 - 2010	2	October 31st, 2006 07:04 PM

All times are GMT -4. The time now is 02:36 PM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.