over the phone dyno results

98Cobra_sleeper · April 13th, 2010, 12:54 PM

well i'll soon be on my way to go pick up the cobra. as most of you may know i have a 98 cobra with an HP Twin turbo kit. The turbos are 67mm 360 race bearing turbos (not dual Ball bearing as advertised). anyway, SGS automotive in Dillsburg, pa did the tuning. He called me this morning, askin me how much hp i was looking to make. i told him close to 600hp, but anything over 500 i would be happy with. He told me at 13lbs of boost i made 640hp/570tq, and wanted to know if i wanted to try 15lbs. i said no at first, then changed my mind and they are gona try for 15lbs and see what it yields, but they are gona keep it at 13lbs for the overall tune. i will try to scan in the dyno sheets later today if i can.

DickH · April 13th, 2010, 02:16 PM

nice numbers, is that with a stock bottom end?

98Cobra_sleeper · April 13th, 2010, 05:47 PM

no i have Eagle rods and Probe Blower pistons.
he dynoed three levels of boost. off the wastegates (5.6lb spring, but actually made between 7-8lbs of boost) it made 506hp/474tq.
-on 13lbs it made 640hp/570tq
-on 15lbs it made 691hp/608tq.
i have the AEM tru-boost controller with a high and low boost settings. the low boost setting is set at 11psi, and the high boost setting is the 15. so im gona drive it around on the low setting, and on the high on the track whenever i get to try it out.

v606er · April 13th, 2010, 05:51 PM

Impressive numbers! She really is a sleeper.

Sneaky whitey

98Cobra_sleeper · April 13th, 2010, 06:34 PM

lol i know! it was rainy today on the hour long drive home, so i couldn't get on it. i tried a lil bit of a third gear pull, and it started to spin at 60mph. so i let off.

April 13th, 2010, 12:54 PM	#1
98Cobra_sleeper Enthusiast 1998 mustang cobra Join Date: Jul 2009 Location: pa Posts: 617 iTrader: 0 reviews	over the phone dyno results well i'll soon be on my way to go pick up the cobra. as most of you may know i have a 98 cobra with an HP Twin turbo kit. The turbos are 67mm 360 race bearing turbos (not dual Ball bearing as advertised). anyway, SGS automotive in Dillsburg, pa did the tuning. He called me this morning, askin me how much hp i was looking to make. i told him close to 600hp, but anything over 500 i would be happy with. He told me at 13lbs of boost i made 640hp/570tq, and wanted to know if i wanted to try 15lbs. i said no at first, then changed my mind and they are gona try for 15lbs and see what it yields, but they are gona keep it at 13lbs for the overall tune. i will try to scan in the dyno sheets later today if i can. __________________ HP twin turbo - 691hp/608tq with 15lbs huffed in (old setup) comin soon...ON3 turbo kit, PTE7175

April 13th, 2010, 02:16 PM	#2
DickH MM Fanatic 2003 gt 5.4 32v on the way Join Date: May 2007 Location: Omaha Posts: 4,188 iTrader: 2 reviews	nice numbers, is that with a stock bottom end? __________________ 2003 Mustang gt - usual mods - slowly working on 5.4 swap 2004 srt4 - Stock DD/winter beater Click here for your tuning needs Before asking a gearing related question click THIS link and enjoy all your saved time.

April 13th, 2010, 05:47 PM	#3
98Cobra_sleeper Enthusiast 1998 mustang cobra Join Date: Jul 2009 Location: pa Posts: 617 iTrader: 0 reviews	no i have Eagle rods and Probe Blower pistons. he dynoed three levels of boost. off the wastegates (5.6lb spring, but actually made between 7-8lbs of boost) it made 506hp/474tq. -on 13lbs it made 640hp/570tq -on 15lbs it made 691hp/608tq. i have the AEM tru-boost controller with a high and low boost settings. the low boost setting is set at 11psi, and the high boost setting is the 15. so im gona drive it around on the low setting, and on the high on the track whenever i get to try it out. __________________ HP twin turbo - 691hp/608tq with 15lbs huffed in (old setup) comin soon...ON3 turbo kit, PTE7175

April 13th, 2010, 06:34 PM	#5
98Cobra_sleeper Enthusiast 1998 mustang cobra Join Date: Jul 2009 Location: pa Posts: 617 iTrader: 0 reviews	lol i know! it was rainy today on the hour long drive home, so i couldn't get on it. i tried a lil bit of a third gear pull, and it started to spin at 60mph. so i let off. __________________ HP twin turbo - 691hp/608tq with 15lbs huffed in (old setup) comin soon...ON3 turbo kit, PTE7175

Threads Similar to: over the phone dyno results
Thread	Thread Starter	Forum	Replies	Last Post
Dyno results	03SuperchargedGT	99-04	35	March 4th, 2009 10:12 AM
Dyno Results	AFtriathlete	99-04	8	June 11th, 2008 10:15 PM
Dyno Results	07stanggt	2005 - 2010	18	December 19th, 2007 07:56 PM
My Dyno Results	WAVEBYE	The Clubhouse	46	October 25th, 2007 09:47 PM
My DYNO results are in!!	Bossman	2005 - 2010	18	February 7th, 2007 07:34 PM

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

All times are GMT -4. The time now is 05:26 PM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.