what s/c pulley do you prefer?

ZoomZoomMFer · April 22nd, 2010, 10:32 AM

just like the title say, you 03/04 guys, what blower pulleys do you prefer 2.76, 2.93, or 3.10?

DICobra · April 22nd, 2010, 06:14 PM

2.8 pulley...

rk_2000_Z/28 · April 23rd, 2010, 02:47 PM

I've got the 2.93 with stock lower, but thats just what was on the car when I bought it. If I was doing it from scratch I'd go 2.76. More boost is a good thing.

Scott2001GT · April 23rd, 2010, 04:37 PM

Originally Posted by rk_2000_Z/28

I've got the 2.93 with stock lower, but thats just what was on the car when I bought it. If I was doing it from scratch I'd go 2.76. More boost is a good thing.

/thread

ZoomZoomMFer · April 27th, 2010, 05:15 AM

yea, the blower i bought came with the smallest available i beileve lol. its a motoblue 2.75. I have been told to stick with the stock lower for now. opinions?

rk_2000_Z/28 · April 27th, 2010, 11:51 AM

There are plenty of guys running different lowers with the 2.76. I believe AZ is running a 4# lower with a 2.76 upper. But at that point you are close to maxing out the potential of the Eaton.

Reloaded · April 27th, 2010, 04:50 PM

What RK said. I'm running the 2.76 pulley right now. Since the blower is ported, I'll change the lower eventually as well. AZ's blower is Steig ported FYI. It really depends on what you want for the car. What kind of power are you looking for? With a pulley that small, there's a possiblity of belt slip. I know that AZ doesn't have any with his 2.76, but I did, so now I run the BF snub idler. Also, I believe if you run a 4lb lower and a 2.76 upper you may run out of fuel pump? Not 100% sure as I'm running a BAP currently.

ZoomZoomMFer · April 27th, 2010, 11:30 PM

yea, im going to get the snub pulley but im running out of cash for a lower lol.

drazga97 · April 28th, 2010, 12:12 AM

unported= 2.76
ported= 2.76/4#

Smoothgrandmama · April 28th, 2010, 08:20 PM

Unported 2.93/4lb lower

April 22nd, 2010, 10:32 AM	#1
ZoomZoomMFer zippeewannabee 06' Mazda Speed6 Join Date: Jul 2007 Location: Orlando, Florida Posts: 3,211 iTrader: 17 reviews	what s/c pulley do you prefer? just like the title say, you 03/04 guys, what blower pulleys do you prefer 2.76, 2.93, or 3.10? __________________ Cobb SRI \| Eibach ProKit \| JBR Short Shift Plate \| JBR Rear Motor Mount

April 22nd, 2010, 06:14 PM	#2
DICobra Newbie Join Date: Jun 2009 Posts: 18 iTrader: 0 reviews	2.8 pulley... __________________ 03 Cobra Coupe DSG #6743 of 8394 2.8 Pulley,Steeda CAI,Magnaflow CB,Bassani Catted X Pipe,DynoTune(SCT Livewire),MGW Shifter,Centerforce DF Clutch,H&R SS,275/35/18,335/30/18 Tires,Brembo Brakes/Slotted Rotors,Hans Racecraft SC 05 GTO IBM 1 of 228

April 23rd, 2010, 02:47 PM	#3
rk_2000_Z/28 Forever in our hearts travis_afx 2003 SVT Cobra Join Date: Apr 2007 Location: Enid, OK Posts: 4,311 iTrader: 0 reviews	I've got the 2.93 with stock lower, but thats just what was on the car when I bought it. If I was doing it from scratch I'd go 2.76. More boost is a good thing. __________________ 03 Cobra-Slow 02 SS, 00 Z/28-Gone Rest In Peace Travis Billings

April 27th, 2010, 05:15 AM	#5
ZoomZoomMFer zippeewannabee 06' Mazda Speed6 Join Date: Jul 2007 Location: Orlando, Florida Posts: 3,211 iTrader: 17 reviews	yea, the blower i bought came with the smallest available i beileve lol. its a motoblue 2.75. I have been told to stick with the stock lower for now. opinions? __________________ Cobb SRI \| Eibach ProKit \| JBR Short Shift Plate \| JBR Rear Motor Mount

April 27th, 2010, 11:51 AM	#6
rk_2000_Z/28 Forever in our hearts travis_afx 2003 SVT Cobra Join Date: Apr 2007 Location: Enid, OK Posts: 4,311 iTrader: 0 reviews	There are plenty of guys running different lowers with the 2.76. I believe AZ is running a 4# lower with a 2.76 upper. But at that point you are close to maxing out the potential of the Eaton. __________________ 03 Cobra-Slow 02 SS, 00 Z/28-Gone Rest In Peace Travis Billings

April 27th, 2010, 11:30 PM	#8
ZoomZoomMFer zippeewannabee 06' Mazda Speed6 Join Date: Jul 2007 Location: Orlando, Florida Posts: 3,211 iTrader: 17 reviews	yea, im going to get the snub pulley but im running out of cash for a lower lol. __________________ Cobb SRI \| Eibach ProKit \| JBR Short Shift Plate \| JBR Rear Motor Mount

April 28th, 2010, 12:12 AM	#9
drazga97 Noob Slayer 2004 Mustang GT 13.82 @ 101.09 Join Date: Oct 2007 Location: New Jersey Posts: 2,458 iTrader: 1 reviews	unported= 2.76 ported= 2.76/4# __________________ 2003 Black Cobra 10th Anniversary 2.8 Kenne Bell Mammoth LC - Built SRA - T56 - E85 - Spray - Stock Longblock - True Forged Mach 5s 2004 Silver GT 5 speed - SOLD MM Cobra Club Member# 97

April 28th, 2010, 08:20 PM	#10
Smoothgrandmama Assistant to the Manager 12 GT 8.46@88 1/8 Join Date: Apr 2007 Location: Willis,Texas Posts: 7,136 iTrader: 6 reviews	Unported 2.93/4lb lower __________________ Join The MM Facebook: Modded Mustangs Facebook Vote For Modded Mustangs Ride of the Month Eskimo Brothers To Smooth: Safi, Blitz34, Graystang01, WillTheThrill, Bwal, 101Fng

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

Threads Similar to: what s/c pulley do you prefer?
Thread	Thread Starter	Forum	Replies	Last Post
Which style do you prefer?	Freedom	The Clubhouse	10	October 28th, 2009 01:47 PM
What do you guys prefer?	zdrainxx	V6 Mustangs	17	September 17th, 2008 09:46 PM
Which Centri Do You Prefer?	JonCo	2005 - 2010	52	February 4th, 2008 12:03 PM
What Do You Prefer	Drick	The Clubhouse	12	November 30th, 2007 10:51 AM

All times are GMT -4. The time now is 05:29 PM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.