03/04 Termi owners, need seat help

JiMi_DRiX · July 4th, 2010, 06:37 PM

Hey everyone, I recently got a set a 03 Cobra seats for my car, and while I was able to rig the power seat to work, I want to do it right. I work at a dealership and we looked up the power seat pigtail, but there are a couple different ones. Can someone please take a picture of the pigtail that plugs into the driver side power seat? I'd appreciate it mucho

AndrewA. · July 4th, 2010, 09:15 PM

Well not quit the same but i put in SN95 seats in my new edge and had to cut both the seat harness and the cars too and just spliced the wires together and it has worked PERFECT and even better than stock as now there is no more seat belt chime.

Seat Swap Issue

JiMi_DRiX · July 4th, 2010, 11:02 PM

Well I dont have the plug off the Cobra to splice into mine, thats why I'm looking for a picture of the connector from a stock cobra seat harness. I want to be able to splice the correct plug into my stock 2 wires and clip the plug into the seat..

AndrewA. · July 4th, 2010, 11:37 PM

Yep i just clipped mine off and spliced them together. It was easer to get rid of both harnesses and just used some good ol electrical tape to hold the wires together.

RC04SVT · July 5th, 2010, 11:28 AM

think i can help ya out on this one:

and actually in one of the pictures i can kinda see a part number on the side.... let me see if i can get a better pic or write it down.

RC04SVT · July 5th, 2010, 11:58 AM

ok so the number on the side is D4AB-14489-DB and on the opposite side it says XA2

hope that helps

JiMi_DRiX · July 5th, 2010, 02:59 PM

That is perfect RC, thanks! hopefully that number will narrow it down. I dont know if the Cobra's have different stuff than the GT's or not. Do yours have the lumbars too? I was told not all the Cobra's had the 6way lumbar, but I'm not sure on that. My plug on the seat is the same as yours, so everything should be good. I'll check into it when I get extra time at work this week.

RC04SVT · July 6th, 2010, 07:16 AM

my 04 has all the lumbar.... and im sure all 03/04 cobras would

JiMi_DRiX · July 7th, 2010, 12:06 AM

Thanks RC. The # is an engineering number, and we were able to look it up, and with the picture we matched it for sure.

July 4th, 2010, 06:37 PM	#1
JiMi_DRiX Regular 1 lowwww mileage 97 GT slow @ 88mph, doc. Join Date: Jun 2008 Location: Tucson, AZ Posts: 445 iTrader: 1 reviews	03/04 Termi owners, need seat help Hey everyone, I recently got a set a 03 Cobra seats for my car, and while I was able to rig the power seat to work, I want to do it right. I work at a dealership and we looked up the power seat pigtail, but there are a couple different ones. Can someone please take a picture of the pigtail that plugs into the driver side power seat? I'd appreciate it mucho __________________ !

July 4th, 2010, 09:15 PM	#2
AndrewA. Hardcore Enthusiast 2001 Mustang GT 8.9@78 Join Date: Jul 2007 Location: DFW Texas Posts: 1,925 iTrader: 2 reviews	Well not quit the same but i put in SN95 seats in my new edge and had to cut both the seat harness and the cars too and just spliced the wires together and it has worked PERFECT and even better than stock as now there is no more seat belt chime. Seat Swap Issue __________________ Fire it up, burn it down.

July 4th, 2010, 11:02 PM	#3
JiMi_DRiX Regular 1 lowwww mileage 97 GT slow @ 88mph, doc. Join Date: Jun 2008 Location: Tucson, AZ Posts: 445 iTrader: 1 reviews	Well I dont have the plug off the Cobra to splice into mine, thats why I'm looking for a picture of the connector from a stock cobra seat harness. I want to be able to splice the correct plug into my stock 2 wires and clip the plug into the seat.. __________________ !

July 4th, 2010, 11:37 PM	#4
AndrewA. Hardcore Enthusiast 2001 Mustang GT 8.9@78 Join Date: Jul 2007 Location: DFW Texas Posts: 1,925 iTrader: 2 reviews	Yep i just clipped mine off and spliced them together. It was easer to get rid of both harnesses and just used some good ol electrical tape to hold the wires together. __________________ Fire it up, burn it down.

July 5th, 2010, 11:28 AM	#5
RC04SVT Regular 04 Cobra Join Date: Jun 2008 Location: Richmond, VA Posts: 363 iTrader: 0 reviews	think i can help ya out on this one: and actually in one of the pictures i can kinda see a part number on the side.... let me see if i can get a better pic or write it down. __________________ 04 Redfire Cobra SVT - JLT RAI, Bassani Catted X,Borla Stingers, MGW STS, Tune 08 Mazdaspeed 3 - Too many boltons - SOLD 00 Mustang GT - Too many boltons - Traded Last edited by RC04SVT; July 5th, 2010 at 11:29 AM. Reason: found something

July 5th, 2010, 11:58 AM	#6
RC04SVT Regular 04 Cobra Join Date: Jun 2008 Location: Richmond, VA Posts: 363 iTrader: 0 reviews	ok so the number on the side is D4AB-14489-DB and on the opposite side it says XA2 hope that helps __________________ 04 Redfire Cobra SVT - JLT RAI, Bassani Catted X,Borla Stingers, MGW STS, Tune 08 Mazdaspeed 3 - Too many boltons - SOLD 00 Mustang GT - Too many boltons - Traded

July 5th, 2010, 02:59 PM	#7
JiMi_DRiX Regular 1 lowwww mileage 97 GT slow @ 88mph, doc. Join Date: Jun 2008 Location: Tucson, AZ Posts: 445 iTrader: 1 reviews	That is perfect RC, thanks! hopefully that number will narrow it down. I dont know if the Cobra's have different stuff than the GT's or not. Do yours have the lumbars too? I was told not all the Cobra's had the 6way lumbar, but I'm not sure on that. My plug on the seat is the same as yours, so everything should be good. I'll check into it when I get extra time at work this week. __________________ !

July 6th, 2010, 07:16 AM	#8
RC04SVT Regular 04 Cobra Join Date: Jun 2008 Location: Richmond, VA Posts: 363 iTrader: 0 reviews	my 04 has all the lumbar.... and im sure all 03/04 cobras would __________________ 04 Redfire Cobra SVT - JLT RAI, Bassani Catted X,Borla Stingers, MGW STS, Tune 08 Mazdaspeed 3 - Too many boltons - SOLD 00 Mustang GT - Too many boltons - Traded

July 7th, 2010, 12:06 AM	#9
JiMi_DRiX Regular 1 lowwww mileage 97 GT slow @ 88mph, doc. Join Date: Jun 2008 Location: Tucson, AZ Posts: 445 iTrader: 1 reviews	Thanks RC. The # is an engineering number, and we were able to look it up, and with the picture we matched it for sure. __________________ !

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

Threads Similar to: 03/04 Termi owners, need seat help
Thread	Thread Starter	Forum	Replies	Last Post
Termi Owners that have had the dreaded alternator problems.	Cricket	4V / SVT	23	December 4th, 2009 10:48 PM
Attention pullied termi owners.......	WilltheThrill	The Clubhouse	33	December 19th, 2008 09:00 PM
Hampton Roads S197 Owners (free rear seat delete)	GTsetGO	The Clubhouse	0	September 15th, 2008 06:05 PM
Hampton Roads S197 owners (free rear seat delete)	GTsetGO	Southeast	7	September 15th, 2008 06:03 PM
Iron fist, Lead Foot a must read for termi owners	ZOOTOXIN	4V / SVT	3	May 23rd, 2008 11:24 PM

All times are GMT -4. The time now is 05:45 PM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.