99 cobra. thinking about getting a kenne bell Opinions needed

setxathlete14 · July 17th, 2011, 09:36 AM

hey guys i just picked up a 99 cobra. its got forged internals with 33kmiles ported mach 1 heads
Stright axle conversion with 3.73s
BBK Lt's with BBK high flos and h pipe
stage 3 clutch

KYbs... upper and lower control arms. welded SFCs, Driveshaft loop

"supposedly" has upgraded bigger fuel system(idk how to tell). but it does have 42lb injectors(blueish green color) and either a lightning or terminator MAF because two of the five wires are cut.

the guy i bought it from "says" its running rich for the supercharger waiting to go on it.... but it had to pass a smog test in houston.

now my real question. found a kenne bell 2.1 kit setup for 14-18 psi im looking to buy. i know ill need the intercooler and tune and all this as well as boost-a-pump and 60lb injectors.

but just looking for what i need before i buy this system.

setxathlete14 · July 17th, 2011, 11:18 AM

This is a used kit* just to verify im not a complete idiot lol

July 17th, 2011, 09:36 AM	#1
setxathlete14 Newbie Join Date: May 2011 Posts: 6 iTrader: 0 reviews	99 cobra. thinking about getting a kenne bell Opinions needed hey guys i just picked up a 99 cobra. its got forged internals with 33kmiles ported mach 1 heads Stright axle conversion with 3.73s BBK Lt's with BBK high flos and h pipe stage 3 clutch KYbs... upper and lower control arms. welded SFCs, Driveshaft loop "supposedly" has upgraded bigger fuel system(idk how to tell). but it does have 42lb injectors(blueish green color) and either a lightning or terminator MAF because two of the five wires are cut. the guy i bought it from "says" its running rich for the supercharger waiting to go on it.... but it had to pass a smog test in houston. now my real question. found a kenne bell 2.1 kit setup for 14-18 psi im looking to buy. i know ill need the intercooler and tune and all this as well as boost-a-pump and 60lb injectors. but just looking for what i need before i buy this system.

LinkBacks (?) LinkBack to this Thread: http://www.moddedmustangs.com/forums/4v-svt/226185-99-cobra-thinking-about-getting-kenne-bell-opinions-needed.html
Posted By	For	Type	Date
Thread 99 cobra. thinking about getting a kenne bell Opinions needed \| Forums at Modded Mustangs \| BoardReader	This thread	Refback	March 31st, 2012 11:34 PM

Threads Similar to: 99 cobra. thinking about getting a kenne bell Opinions needed
Thread	Thread Starter	Forum	Replies	Last Post
Extra Parts needed to Install a Kenne Bell	RioRed95	94-95	3	April 18th, 2011 07:52 AM
Parts needed for a Kenne Bell Install	RioRed95	5.0 Mustangs	20	April 15th, 2011 08:33 AM
thinking of installing a Kenne bell 2.1 but...	99-04GTsLEEPER	99-04	33	November 18th, 2010 08:22 PM
kenne bell 2.1 in a 97 cobra	Keasbey	4V / SVT	30	April 24th, 2010 02:11 PM
Kenne Bell on 99' Cobra	Lefty	General Tech	3	January 18th, 2008 12:33 AM

July 17th, 2011, 11:18 AM	#2
setxathlete14 Newbie Join Date: May 2011 Posts: 6 iTrader: 0 reviews	This is a used kit* just to verify im not a complete idiot lol

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

All times are GMT -4. The time now is 04:15 PM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.