[2VSouth]

Finally got my 99 bezels so I began to mod them slightly to accept the 03 fogs. So far I've gotten the foglight to sit flush with the hole. Now i need to find something to make a bracket to mount.

Here's a pic of how it sits all around the bezel.

I'll try and make a write up for this once i have it completed.

[2VSouth]

Finished up getting the pass side foglight mounted up in the bezel. Was rather simple really. All I did was just grind down 3 small parts of the bezel to allow the foglight to slip into place and allow for the brackets to fit better. Here's some pics of what I'm talking about.








I trimmed down this tower as it was a tad too tall and interfered with the foglight. Doing this helped the foglight sit down on the bezel flush.


For the mounting brackets, I got a pack of little L shaped hangars from Home Depot that worked pretty well. The screws I used were just from around the house. 2 were shorter and 2 were longer.


Some washers come in handy to even the brackets out since the mounting towers they sit on weren't even.


And here how it looks on the bumper.

[azure mach!]

subb'd

[2VSouth]

Got the driver side foglight mounted on the bezel. About to go put it in the bumper
Was much faster getting done this time seeing as I knew what to do but here's some pics of this one.





Someones creepin

[2VSouth]

Finished! Bumper not on the car yet. I still need to file down the tabs on the foglight plug ins so I can use my GT foglight harness.








I'll make a write up within in the coming days so anyone who is interested in doing this, stay posted.