New Goodies For The Mach

Doc8224 · February 29th, 2008, 02:12 PM

My new upgrades arrived this afternoon. Going to be putting them on/in this weekend. Just thought I would share.

kevin86freeman · February 29th, 2008, 06:13 PM

dude whats up with ur feet lol

j/p

03 R Code · February 29th, 2008, 06:32 PM

Those pics look like you got the Michael J Fox's!

Looks like you'll have fun doin something this weekend though.

BWAL09 · February 29th, 2008, 06:34 PM

what are those squiggly things in the first pic?

and BTW your feet look better than they taste

chris1 · February 29th, 2008, 06:35 PM

That spacer will compliment your mods! Tq. will be more noticable.

Happy modding!

Doc8224 · February 29th, 2008, 08:12 PM

*Note to self, figure out how to balance my cams on my ass cheeks so I can get more responses then throwing a foot in one.*

Don't know why they came out shaky. I took them like 5 times. Thats what I hate about digital cameras. Push the button, then a sec later it snaps the pic. By the way BWAL its an intake spacer in the first pic.

SWEET2KSTANG · March 1st, 2008, 06:09 PM

been a long day so far doing all this on the mach. will be done in a few hours and will have some pics shortly. doc has UDP's installed, and is working on the trans kit. i will tell you one thing for sure, the casting on the intake is pretty bad! i am having a long day with the porting, but will be worth it in the end

WilltheThrill · March 1st, 2008, 06:51 PM

Originally Posted by kevin86freeman

dude whats up with ur feet lol

j/p

lmao!

Doc8224 · March 2nd, 2008, 03:52 AM

Finaly done! Freakin 2:30am. Started before noon. Tranny kit definately a must for the auto guys. Install wasn't too bad. Just took awhile. Shifts very nice and hard. Sweet2k did a damn fine P&P job on the intake. Got it all back together with Royal Purple in the motor, UDP's on, P&P'd intake with PHP spacer, Transgo shift kit and seperator plate mod done. All in all a very productive and power increasing day. Thanks to Sweet2k for his hard work on the intake, and sticking it out with me for a the whole 12-14hr day. I am very pleased. 4.10's should be going in within the next couple weeks. Here are some of the pics or the UDP's and tranny kit going in, Sweet2k will be in here I am sure soon to post up some of the pics of his handy work on the manifold.

WIKD · March 2nd, 2008, 04:10 PM

Congrats on all the work. As for the pics, hit your macro button on the camera. You're probably to close for it to focus correctly.

cobraetti · March 2nd, 2008, 08:14 PM

where did you find the intake spacer?, did you need a puller for the u/d pulleys and can you reuse the stock belt

Mach Boy · March 2nd, 2008, 08:31 PM

Paul's High Performance for the spacer and I'm 95% sure the belt is still good for the UDPs.

Doc8224 · March 3rd, 2008, 02:48 AM

Originally Posted by cobraetti

where did you find the intake spacer?, did you need a puller for the u/d pulleys and can you reuse the stock belt

Originally Posted by Mach Boy

Paul's High Performance for the spacer and I'm 95% sure the belt is still good for the UDPs.

Yes the belt is the same. We had to use a puller on my crank pulley, but sometimes it will come off easy. If you can afford it I would invest in the stewart compents water pump ($150) its a solid 12-14rwhp bolt on and since you will have the belt and pullies off already its a good time to do it. Link:EMP/Stewart Components, Water Pumps, Mechanical - summitracing.com
I kick myself for not going ahead and having it here when we did mine. And here is the link to the spacer if you haven't found it already. PHP Intake Spacer w/Gasket

SWEET2KSTANG · March 3rd, 2008, 05:00 AM

a few pics off my camera. forgot to do full pics of intake after i was done, i was too damn tired to remember.

prodrifterx · March 3rd, 2008, 10:21 AM

very nice. lucky you with all them goodies.

February 29th, 2008, 02:12 PM	#1
Doc8224 Hardcore Enthusiast 2003 Mach 1 Join Date: Oct 2007 Location: N.W. Arkansas Posts: 2,682	New Goodies For The Mach My new upgrades arrived this afternoon. Going to be putting them on/in this weekend. Just thought I would share. __________________ *Project N/A 4V Under Way*

February 29th, 2008, 06:13 PM	#2
kevin86freeman Regular 2003 Mach 1 Mustang Join Date: Apr 2007 Location: Cali Posts: 261	dude whats up with ur feet lol j/p __________________ M.M. MACH1 CREW Member 7

February 29th, 2008, 06:32 PM	#3
03 R Code Hardcore Enthusiast unstoppable @ speed of light Join Date: Jul 2006 Location: Knees deep in dat ass Posts: 2,833	Those pics look like you got the Michael J Fox's! Looks like you'll have fun doin something this weekend though. __________________ Political correctness is a doctrine fostered by a delusional, illogical, liberal minority, and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a turd by the clean end.

February 29th, 2008, 06:35 PM	#5
chris1 Enthusiast 2003 Ford Mach Traveling at the speed of a photon Join Date: Feb 2007 Location: Los Angeles, California Posts: 706	That spacer will compliment your mods! Tq. will be more noticable. Happy modding! __________________ Under my Umbrella! Studies show that 99.9% of the kids on MM ask the same questions over and over again about performance parts yet do nothing after the advice is given because they're still in Highschool and suffer from no money syndrome.

February 29th, 2008, 08:12 PM	#6
Doc8224 Hardcore Enthusiast 2003 Mach 1 Join Date: Oct 2007 Location: N.W. Arkansas Posts: 2,682	Note to self, figure out how to balance my cams on my ass cheeks so I can get more responses then throwing a foot in one. Don't know why they came out shaky. I took them like 5 times. Thats what I hate about digital cameras. Push the button, then a sec later it snaps the pic. By the way BWAL its an intake spacer in the first pic. __________________ *Project N/A 4V Under Way*

March 1st, 2008, 06:09 PM	#7
SWEET2KSTANG MM Fanatic 2000 mustang gt 12.01@114.69 Join Date: Oct 2006 Location: N.W. AR Posts: 3,973	been a long day so far doing all this on the mach. will be done in a few hours and will have some pics shortly. doc has UDP's installed, and is working on the trans kit. i will tell you one thing for sure, the casting on the intake is pretty bad! i am having a long day with the porting, but will be worth it in the end __________________ stock long block, bolt ons, slicks, and a little squeeze 1/4 E.T. 12.06@114.69 Only two defining forces have ever offered to die for you: 1. Jesus Christ 2. The American G. I. One died for your soul, the other for your freedom. Last edited by SWEET2KSTANG : March 1st, 2008 at 06:13 PM.

March 2nd, 2008, 03:52 AM	#9
Doc8224 Hardcore Enthusiast 2003 Mach 1 Join Date: Oct 2007 Location: N.W. Arkansas Posts: 2,682	Finaly done! Freakin 2:30am. Started before noon. Tranny kit definately a must for the auto guys. Install wasn't too bad. Just took awhile. Shifts very nice and hard. Sweet2k did a damn fine P&P job on the intake. Got it all back together with Royal Purple in the motor, UDP's on, P&P'd intake with PHP spacer, Transgo shift kit and seperator plate mod done. All in all a very productive and power increasing day. Thanks to Sweet2k for his hard work on the intake, and sticking it out with me for a the whole 12-14hr day. I am very pleased. 4.10's should be going in within the next couple weeks. Here are some of the pics or the UDP's and tranny kit going in, Sweet2k will be in here I am sure soon to post up some of the pics of his handy work on the manifold. __________________ *Project N/A 4V Under Way*

March 2nd, 2008, 04:10 PM	#10
WIKD Newbie 2004 Mach 1 Join Date: Apr 2007 Location: Central Florida Posts: 23	Congrats on all the work. As for the pics, hit your macro button on the camera. You're probably to close for it to focus correctly.

March 2nd, 2008, 08:14 PM	#11
cobraetti Regular 2001 svt cobra 10's I wish Join Date: Aug 2006 Location: goose creek,sc Posts: 242	where did you find the intake spacer?, did you need a puller for the u/d pulleys and can you reuse the stock belt __________________ created 5/29/2001 on Tuesday, #1249 of 3867 1 of 556 in silver metallic

March 2nd, 2008, 08:31 PM	#12
Mach Boy Hardcore Enthusiast 2004 Mustang Mach 1 14.04@103.04 Join Date: Sep 2007 Location: Terre Haute, IN / St. Louis, MO Posts: 1,065	Paul's High Performance for the spacer and I'm 95% sure the belt is still good for the UDPs. __________________ 302rwhp 321tq

March 3rd, 2008, 05:00 AM	#14
SWEET2KSTANG MM Fanatic 2000 mustang gt 12.01@114.69 Join Date: Oct 2006 Location: N.W. AR Posts: 3,973	a few pics off my camera. forgot to do full pics of intake after i was done, i was too damn tired to remember. __________________ stock long block, bolt ons, slicks, and a little squeeze 1/4 E.T. 12.06@114.69 Only two defining forces have ever offered to die for you: 1. Jesus Christ 2. The American G. I. One died for your soul, the other for your freedom.

Threads Similar to: New Goodies For The Mach
Thread	Thread Starter	Forum	Replies	Last Post
goodies	zinc02GT	99-04	0	January 26th, 2008 12:30 AM
goodies!	mystang0673	For Sale	6	January 22nd, 2008 02:30 PM
My New Goodies!	97Cobra	The Clubhouse	49	January 11th, 2008 08:09 PM
Got My goodies ORDERED!	97Cobra	The Clubhouse	10	November 22nd, 2007 02:30 PM
Just got my goodies........	jjuddz	2005+	0	May 30th, 2007 10:37 PM

All times are GMT -4. The time now is 10:57 AM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.