Pics Of The Cobra 4 Sale also!!!!!

FX4DTUF · March 4th, 2008, 10:10 PM

it is a 1965 factory 5 Replica Cobra only 300 miles on it since built

Motor/drivetrain Mods-
302 block bored and stroked 2 347 c.i. blue printed and balanced
Speed Pro Pistons,Rings and Rods
Forged crank
Lunati Vodoo mild street/strip cam
Edelbrock Performer Heads and Intake manifold
longtube headers into sidepipes
Holley Pro form 750 cfm Carb
fully built C4 trans 3 speed built
3:73 Detroit Locker 31 spline axles

interior mods-
Cobra Racing buckets
sony xplode speakers and headunit
hurst t-handle rachet shifter
custom made dash and shifter stand by me and my father out off stainless steel and in the engine compartment we have fitted it with diamond plate
custom carpet and door panels by a professional apolster with custom mad badges between the seats and in the trunk
flaming river rack and pinion steering box and column
optima red top in a custom battery holder made out of stainless
steel

Exterior mods-
Weld racing Pro Stars 17x8 upfront 17x10 in the back
not shure wut tires were runnin have 2 check again i never really paid attention 2 them i will update later
cross drilled and slotted rotors single piston calipers

thats everything i can think of as of right now will update later now 2 the pics here you go guys enjoy....

FX4DTUF · March 4th, 2008, 10:14 PM

Bump!!!! 30,000 obo

FX4DTUF · March 4th, 2008, 10:18 PM

FX4DTUF · March 4th, 2008, 10:19 PM

03 R Code · March 4th, 2008, 10:23 PM

You're in the wrong section... Should be in the for sale forums... Not that hard to find...

FX4DTUF · March 4th, 2008, 10:23 PM

Bump!! Come on guys tell me wut you think.

G.T. Rags · March 4th, 2008, 10:25 PM

Originally Posted by 03 R Code

You're in the wrong section... Should be in the for sale forums... Not that hard to find...

FX4DTUF · March 4th, 2008, 10:27 PM

dude i jus want u guys 2 tell me wut u think of it i jus said its 4 sale also that wus jus a add on

G.T. Rags · March 4th, 2008, 10:28 PM

i personally don't like them.......there to much car for me

FX4DTUF · March 4th, 2008, 10:33 PM

Originally Posted by 96GTRagTop

i personally don't like them.......there to much car for me

thanks oh and it probly is its a 1900 lb car with a 480hp n/a motor on pump gas so yeah i think your right

FX4DTUF · March 4th, 2008, 10:41 PM

bump!!

TheBusher · March 4th, 2008, 10:48 PM

I've got 30,000 pennies

Black02GT · March 4th, 2008, 10:49 PM

trade for 93 toyota work truck? haha jk

FX4DTUF · March 4th, 2008, 10:52 PM

nice 1 guys lol defently not 30,000 pennies lol and no 2 the trade sry bro lol now if u come up with a good enough trade my dad might think about it.....

FX4DTUF · March 5th, 2008, 03:39 PM

Afternoon Bump

BWAL · March 5th, 2008, 03:42 PM

was it built using a donor car or all new parts?

and BTW, it probably weighs closer to 2,210 lbs.

FX4DTUF · March 5th, 2008, 03:51 PM

all new parts and yeah i jus got pist cause they werent even telling me if they like it they were jus givin me shit 4 no reason

mustangrebuilder · March 5th, 2008, 03:58 PM

nasty car man...

i love them...

wish i had 30 big ones...

got to drive one once they are fast as fuck

FX4DTUF · March 5th, 2008, 04:04 PM

i know man i love ours but its jus 2 fast no traction at all even at 70 you can nail it and it will drop into 2nd and light the hell out of the tires

BWAL · March 5th, 2008, 04:13 PM

for all you guys wondering, this is a great deal for this car especially considering all the work done to it.. i know factory five cobras inside and out and i can guarantee you that you wont find one with this much work done to it for cheaper than this.. i'd be willing to bet money that this car could dip into the 9's in the 1/4 mile...

March 4th, 2008, 10:10 PM	#1
FX4DTUF MM's Ford Truck Guy 99 ranger,2010 ranger does nice burnouts Join Date: Feb 2008 Location: Stafford, VA Posts: 1,382 iTrader: 0 reviews	Pics Of The Cobra 4 Sale also!!!!! it is a 1965 factory 5 Replica Cobra only 300 miles on it since built Motor/drivetrain Mods- 302 block bored and stroked 2 347 c.i. blue printed and balanced Speed Pro Pistons,Rings and Rods Forged crank Lunati Vodoo mild street/strip cam Edelbrock Performer Heads and Intake manifold longtube headers into sidepipes Holley Pro form 750 cfm Carb fully built C4 trans 3 speed built 3:73 Detroit Locker 31 spline axles interior mods- Cobra Racing buckets sony xplode speakers and headunit hurst t-handle rachet shifter custom made dash and shifter stand by me and my father out off stainless steel and in the engine compartment we have fitted it with diamond plate custom carpet and door panels by a professional apolster with custom mad badges between the seats and in the trunk flaming river rack and pinion steering box and column optima red top in a custom battery holder made out of stainless steel Exterior mods- Weld racing Pro Stars 17x8 upfront 17x10 in the back not shure wut tires were runnin have 2 check again i never really paid attention 2 them i will update later cross drilled and slotted rotors single piston calipers thats everything i can think of as of right now will update later now 2 the pics here you go guys enjoy.... __________________ 1999 xlt 2.5 ranger lowered 5/6 on 17in bullits 2010 4.0 xlt ranger lowered 4/5 on 18in dd bullits Last edited by FX4DTUF; March 4th, 2008 at 10:13 PM.

March 4th, 2008, 10:14 PM	#2
FX4DTUF MM's Ford Truck Guy 99 ranger,2010 ranger does nice burnouts Join Date: Feb 2008 Location: Stafford, VA Posts: 1,382 iTrader: 0 reviews	Bump!!!! 30,000 obo __________________ 1999 xlt 2.5 ranger lowered 5/6 on 17in bullits 2010 4.0 xlt ranger lowered 4/5 on 18in dd bullits

March 4th, 2008, 10:18 PM	#3
FX4DTUF MM's Ford Truck Guy 99 ranger,2010 ranger does nice burnouts Join Date: Feb 2008 Location: Stafford, VA Posts: 1,382 iTrader: 0 reviews	__________________ 1999 xlt 2.5 ranger lowered 5/6 on 17in bullits 2010 4.0 xlt ranger lowered 4/5 on 18in dd bullits

March 4th, 2008, 10:19 PM	#4
FX4DTUF MM's Ford Truck Guy 99 ranger,2010 ranger does nice burnouts Join Date: Feb 2008 Location: Stafford, VA Posts: 1,382 iTrader: 0 reviews	__________________ 1999 xlt 2.5 ranger lowered 5/6 on 17in bullits 2010 4.0 xlt ranger lowered 4/5 on 18in dd bullits

March 4th, 2008, 10:23 PM	#5
03 R Code MM Fanatic unstoppable @ speed of light Join Date: Jul 2006 Location: Knees deep in dat ass Posts: 3,104 iTrader: 0 reviews	You're in the wrong section... Should be in the for sale forums... Not that hard to find... __________________ Political correctness is a doctrine fostered by a delusional, illogical, liberal minority, and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a turd by the clean end.

March 4th, 2008, 10:27 PM	#8
FX4DTUF MM's Ford Truck Guy 99 ranger,2010 ranger does nice burnouts Join Date: Feb 2008 Location: Stafford, VA Posts: 1,382 iTrader: 0 reviews	dude i jus want u guys 2 tell me wut u think of it i jus said its 4 sale also that wus jus a add on __________________ 1999 xlt 2.5 ranger lowered 5/6 on 17in bullits 2010 4.0 xlt ranger lowered 4/5 on 18in dd bullits

March 4th, 2008, 10:41 PM	#11
FX4DTUF MM's Ford Truck Guy 99 ranger,2010 ranger does nice burnouts Join Date: Feb 2008 Location: Stafford, VA Posts: 1,382 iTrader: 0 reviews	bump!! __________________ 1999 xlt 2.5 ranger lowered 5/6 on 17in bullits 2010 4.0 xlt ranger lowered 4/5 on 18in dd bullits

March 4th, 2008, 10:49 PM	#13
Black02GT Hardcore Enthusiast 03 Mach 1--~--1 of 2513 8.8 1/8 mile time Join Date: Apr 2007 Location: Alcoa/Knoxville, Tn Posts: 1,644 iTrader: 0 reviews	trade for 93 toyota work truck? haha jk __________________ Originally Posted by HMUSN it's like racing a mach 1 .. not untouchable but still gonna lose plain and simple no matter how you roll the dice. SaleenWolf720: need horsepower?? no, you just need bald tires, then you'll really feel the power

March 4th, 2008, 10:52 PM	#14
FX4DTUF MM's Ford Truck Guy 99 ranger,2010 ranger does nice burnouts Join Date: Feb 2008 Location: Stafford, VA Posts: 1,382 iTrader: 0 reviews	nice 1 guys lol defently not 30,000 pennies lol and no 2 the trade sry bro lol now if u come up with a good enough trade my dad might think about it..... __________________ 1999 xlt 2.5 ranger lowered 5/6 on 17in bullits 2010 4.0 xlt ranger lowered 4/5 on 18in dd bullits

March 5th, 2008, 03:39 PM	#15
FX4DTUF MM's Ford Truck Guy 99 ranger,2010 ranger does nice burnouts Join Date: Feb 2008 Location: Stafford, VA Posts: 1,382 iTrader: 0 reviews	Afternoon Bump __________________ 1999 xlt 2.5 ranger lowered 5/6 on 17in bullits 2010 4.0 xlt ranger lowered 4/5 on 18in dd bullits

March 5th, 2008, 03:42 PM	#16
BWAL MSTRB8N & MDR8N 2021 Mustang V15 Quad Turbo with nawz Join Date: Nov 2006 Location: On The Shaft Posts: 19,657 Blog Entries: 2 iTrader: 4 reviews	was it built using a donor car or all new parts? and BTW, it probably weighs closer to 2,210 lbs. __________________ MM 1 am boner crew Cars and mod list in garage i like veiny meat sliding between my buttcheeks

March 5th, 2008, 03:51 PM	#17
FX4DTUF MM's Ford Truck Guy 99 ranger,2010 ranger does nice burnouts Join Date: Feb 2008 Location: Stafford, VA Posts: 1,382 iTrader: 0 reviews	all new parts and yeah i jus got pist cause they werent even telling me if they like it they were jus givin me shit 4 no reason __________________ 1999 xlt 2.5 ranger lowered 5/6 on 17in bullits 2010 4.0 xlt ranger lowered 4/5 on 18in dd bullits

March 5th, 2008, 03:58 PM	#18
mustangrebuilder Enthusiast Join Date: Sep 2006 Posts: 991 iTrader: 0 reviews	nasty car man... i love them... wish i had 30 big ones... got to drive one once they are fast as fuck

March 5th, 2008, 04:04 PM	#19
FX4DTUF MM's Ford Truck Guy 99 ranger,2010 ranger does nice burnouts Join Date: Feb 2008 Location: Stafford, VA Posts: 1,382 iTrader: 0 reviews	i know man i love ours but its jus 2 fast no traction at all even at 70 you can nail it and it will drop into 2nd and light the hell out of the tires __________________ 1999 xlt 2.5 ranger lowered 5/6 on 17in bullits 2010 4.0 xlt ranger lowered 4/5 on 18in dd bullits

March 5th, 2008, 04:13 PM	#20
BWAL MSTRB8N & MDR8N 2021 Mustang V15 Quad Turbo with nawz Join Date: Nov 2006 Location: On The Shaft Posts: 19,657 Blog Entries: 2 iTrader: 4 reviews	for all you guys wondering, this is a great deal for this car especially considering all the work done to it.. i know factory five cobras inside and out and i can guarantee you that you wont find one with this much work done to it for cheaper than this.. i'd be willing to bet money that this car could dip into the 9's in the 1/4 mile... __________________ MM 1 am boner crew Cars and mod list in garage i like veiny meat sliding between my buttcheeks

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

All times are GMT -4. The time now is 07:02 PM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.