best arms for me

Mustang RacR94 · July 12th, 2008, 09:42 PM

looking for best lowers for my Mach. Mainly track oriented. But ss long as they don't break anything on the road were good.

Looking at steeda aluminum drag arms or weight jackets. Thanks

chris1 · July 12th, 2008, 09:56 PM

Some have experienced great traction with the extreme duty MM LCA's. I on the other hand don't have the experience with these, but over at the registry they love them.

Doc8224 · July 12th, 2008, 10:13 PM

Weight jackers. thats what I am lookin at getting as well. You will get more traction upgrade from good uppers though. Some double adjustable uppers with billet or spherical bushings

futureMACH1racer · July 12th, 2008, 10:43 PM

Both of you guys do yoursleves a favor. Get HPM Megabytes, or Megabyte jr's, they're a race quality part and reasonabley priced. I have them, and love them.

Mustang RacR94 · July 12th, 2008, 10:53 PM

So the weight jackets are better then the all out aluminum drag arm? And as far as uppers go I don't know why I didn't put them in the post as well. What about the steeda heavy duty uppers or what ones are the best on the market. By the end of winter I'll be sorting long tubes/upper lower arms/built rear/aluminum DS. Stock one is looking rough for no reason. A tubular K member when I do the long tubes. And hopefully ago shocks and struts and frame ties. But well see how it all goes

Doc8224 · July 13th, 2008, 07:47 AM

I missed where you said you want all out race setup. the weight jackers are great so you can keep a nice lowered stance on the street then jack em up to clear a big set of slicks. they are all realy good. And FM1R I am dead set on the weight jacker lowers for the adjustability, and I am realy looking at the GMS double adjustable uppers.

Mustang RacR94 · July 13th, 2008, 08:53 AM

I'm not dead set on a full race setup. As long as the weight jackets hook up to prob around 500 600 horse. I plan ok making this thing a gross car down the road

futureMACH1racer · July 13th, 2008, 01:36 PM

The HPM Megabytes, allow for full adjustability like the weight jackers. I'm just trying to help, I know that they work. It's what all of the cars that come out of D&D run.

Doc8224 · July 13th, 2008, 05:21 PM

Originally Posted by futureMACH1racer

The HPM Megabytes, allow for full adjustability like the weight jackers. I'm just trying to help, I know that they work. It's what all of the cars that come out of D&D run.

Got a link? I haven't seen them and if they work I am interested.

futureMACH1racer · July 13th, 2008, 05:39 PM

Read this report from Livernois Motorsports. All of the performance shops here reccomend them.
New - Livernois Motorsports - HPM Mega-Bite Jr. Lower Control Arms

futureMACH1racer · July 13th, 2008, 05:40 PM

Here is direct link the HPM...

HPM Performance Products: SN95 (94-98), (99-2004)

futureMACH1racer · July 13th, 2008, 05:42 PM

Here is another one...
Stiffened & Slammed Part 1 - Muscle Mustangs & Fast Fords Magazine

Mustang RacR94 · July 13th, 2008, 06:09 PM

thanks man I'm def considering these now. Great help man. As soon as I get back to my comp gonna give ya rep(hard to do on iPhone sometimes)

Hillsbaseball08 · July 13th, 2008, 06:14 PM

I just got the BBK upper and lower package for $300. (haven't gotten to use them yet, had some problems on the way out to the track) but I heard that most of the aftermarket control arms are almost identical. There's really not that much to change. If I had extra money laying around I would get the HPMs for sure though.

futureMACH1racer · July 13th, 2008, 06:40 PM

Anybody here ever use the Ford Racing CA's?

July 12th, 2008, 09:42 PM	#1
Mustang RacR94 Hardcore Enthusiast 03 mach 1 13.2@109 Join Date: Dec 2006 Location: Mooretownship,PA kinda close to allentown Posts: 2,414	best arms for me looking for best lowers for my Mach. Mainly track oriented. But ss long as they don't break anything on the road were good. Looking at steeda aluminum drag arms or weight jackets. Thanks __________________ 2003 Mach 1, 5 speed MM MACH 1 CREW www.myspace.com/mustangracr94

July 12th, 2008, 09:56 PM	#2
chris1 Enthusiast 2003 Ford Mach Traveling at the speed of a photon Join Date: Feb 2007 Location: Los Angeles, California Posts: 792	Some have experienced great traction with the extreme duty MM LCA's. I on the other hand don't have the experience with these, but over at the registry they love them. __________________ Under my Umbrella! Studies show that 99.9% of the kids on MM ask the same questions over and over again about performance parts yet do nothing after the advice is given because they're still in Highschool and suffer from no money syndrome.

July 12th, 2008, 10:43 PM	#4
futureMACH1racer July 08 ROTM 2004 Mach 1 Too Slow Join Date: Sep 2007 Location: Fantasy Land Posts: 2,674	Both of you guys do yoursleves a favor. Get HPM Megabytes, or Megabyte jr's, they're a race quality part and reasonabley priced. I have them, and love them. __________________ MM MACH 1 CREW MEMBER #2 McCain/Palin '08 Arsenal0328 (10:32:19 PM): mso gives me a raging hard on

July 12th, 2008, 10:53 PM	#5
Mustang RacR94 Hardcore Enthusiast 03 mach 1 13.2@109 Join Date: Dec 2006 Location: Mooretownship,PA kinda close to allentown Posts: 2,414	So the weight jackets are better then the all out aluminum drag arm? And as far as uppers go I don't know why I didn't put them in the post as well. What about the steeda heavy duty uppers or what ones are the best on the market. By the end of winter I'll be sorting long tubes/upper lower arms/built rear/aluminum DS. Stock one is looking rough for no reason. A tubular K member when I do the long tubes. And hopefully ago shocks and struts and frame ties. But well see how it all goes __________________ 2003 Mach 1, 5 speed MM MACH 1 CREW www.myspace.com/mustangracr94

July 13th, 2008, 08:53 AM	#7
Mustang RacR94 Hardcore Enthusiast 03 mach 1 13.2@109 Join Date: Dec 2006 Location: Mooretownship,PA kinda close to allentown Posts: 2,414	I'm not dead set on a full race setup. As long as the weight jackets hook up to prob around 500 600 horse. I plan ok making this thing a gross car down the road __________________ 2003 Mach 1, 5 speed MM MACH 1 CREW www.myspace.com/mustangracr94

July 13th, 2008, 01:36 PM	#8
futureMACH1racer July 08 ROTM 2004 Mach 1 Too Slow Join Date: Sep 2007 Location: Fantasy Land Posts: 2,674	The HPM Megabytes, allow for full adjustability like the weight jackers. I'm just trying to help, I know that they work. It's what all of the cars that come out of D&D run. __________________ MM MACH 1 CREW MEMBER #2 McCain/Palin '08 Arsenal0328 (10:32:19 PM): mso gives me a raging hard on

July 13th, 2008, 05:39 PM	#10
futureMACH1racer July 08 ROTM 2004 Mach 1 Too Slow Join Date: Sep 2007 Location: Fantasy Land Posts: 2,674	Read this report from Livernois Motorsports. All of the performance shops here reccomend them. New - Livernois Motorsports - HPM Mega-Bite Jr. Lower Control Arms __________________ MM MACH 1 CREW MEMBER #2 McCain/Palin '08 Arsenal0328 (10:32:19 PM): mso gives me a raging hard on

July 13th, 2008, 05:40 PM	#11
futureMACH1racer July 08 ROTM 2004 Mach 1 Too Slow Join Date: Sep 2007 Location: Fantasy Land Posts: 2,674	Here is direct link the HPM... HPM Performance Products: SN95 (94-98), (99-2004) __________________ MM MACH 1 CREW MEMBER #2 McCain/Palin '08 Arsenal0328 (10:32:19 PM): mso gives me a raging hard on

July 13th, 2008, 05:42 PM	#12
futureMACH1racer July 08 ROTM 2004 Mach 1 Too Slow Join Date: Sep 2007 Location: Fantasy Land Posts: 2,674	Here is another one... Stiffened & Slammed Part 1 - Muscle Mustangs & Fast Fords Magazine __________________ MM MACH 1 CREW MEMBER #2 McCain/Palin '08 Arsenal0328 (10:32:19 PM): mso gives me a raging hard on

July 13th, 2008, 06:09 PM	#13
Mustang RacR94 Hardcore Enthusiast 03 mach 1 13.2@109 Join Date: Dec 2006 Location: Mooretownship,PA kinda close to allentown Posts: 2,414	thanks man I'm def considering these now. Great help man. As soon as I get back to my comp gonna give ya rep(hard to do on iPhone sometimes) __________________ 2003 Mach 1, 5 speed MM MACH 1 CREW www.myspace.com/mustangracr94

July 13th, 2008, 06:14 PM	#14
Hillsbaseball08 Enthusiast 2002 Mustang GT 8.15@86 (1/8) Join Date: Oct 2007 Location: Fort Worth,Texas Posts: 594	I just got the BBK upper and lower package for $300. (haven't gotten to use them yet, had some problems on the way out to the track) but I heard that most of the aftermarket control arms are almost identical. There's really not that much to change. If I had extra money laying around I would get the HPMs for sure though. __________________ 07 GT500 & 2002 GT: 100 Shot Of Nitrous, 75mm BBK Throttle Body and Plenum, C&L Intake, Flowmaster Exaust, Bassani X Pipes, 3:73 Gear Ratio, BBK Upper and Lower Control Arms, Pro 5.0 Shifter, DiabloSport Tune, Underdrive Pulleys, Line Lock.

July 13th, 2008, 06:40 PM	#15
futureMACH1racer July 08 ROTM 2004 Mach 1 Too Slow Join Date: Sep 2007 Location: Fantasy Land Posts: 2,674	Anybody here ever use the Ford Racing CA's? __________________ MM MACH 1 CREW MEMBER #2 McCain/Palin '08 Arsenal0328 (10:32:19 PM): mso gives me a raging hard on

Threads Similar to: best arms for me
Thread	Thread Starter	Forum	Replies	Last Post
QA1 Tubular Control Arms (A-Arms)	keith0s	5.0 Mustangs	3	October 19th, 2007 11:20 AM
steel control arms vs aluminum control arms	Saleenwolf720	99-04	1	October 15th, 2007 01:32 PM
Upper Control Arms & Lower Control Arms	LUV2XLR8	2005+	6	October 6th, 2007 11:45 AM
Steeda lower control arms (Trailing arms)?	kmjsmith	2005+	6	July 4th, 2007 04:59 PM
A-arms	1gunner23	5.0 Mustangs	4	March 2nd, 2007 11:20 PM

All times are GMT -4. The time now is 01:46 PM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.