5.0 9PSI Hellion turbo kit

99mustang232 · January 19th, 2006, 09:43 PM

MMFF install and review articles w/dyno graphs

"9 psi of boost, the stock '92 LX kicked out an impressive 392.4 rwhp and a maximum rear wheel torque reading of 487.1 lb-ft. This was accomplished with a stock computer and manual tuning of fuel pressure and timing. "

"Unfortunately, we didn't even get a full chassis dyno run from the car before she kicked the head gaskets. The boost gauge swept--almost instantly--to a whopping 18 psi of boost and then--boom! Speed Dreams' super-clean chassis dyno room was covered with an antifreeze/water mix."

"brand-new AFR 185 heads and a TFS Street Heat intake manifold installed on the stock short-block and were sealed with a set of Cometic head gaskets. Improving the induction jumped the power output from 390/494 to an impressive 465 rwhp and a ground-pounding 517 lb-ft of torque"

ckthecerealkiller · January 19th, 2006, 11:23 PM

Very nice, I loved the read!

Thanks again.

Anthony · February 1st, 2006, 01:18 PM

nice! now they need to get busy with a kit for the 94-95 cars!

January 19th, 2006, 09:43 PM	#1
99mustang232 MM Fanatic 1999 Ford Mustang V6 Join Date: Sep 2005 Location: newport news, va Posts: 3,745 iTrader: 0 reviews	5.0 9PSI Hellion turbo kit MMFF install and review articles w/dyno graphs "9 psi of boost, the stock '92 LX kicked out an impressive 392.4 rwhp and a maximum rear wheel torque reading of 487.1 lb-ft. This was accomplished with a stock computer and manual tuning of fuel pressure and timing. " "Unfortunately, we didn't even get a full chassis dyno run from the car before she kicked the head gaskets. The boost gauge swept--almost instantly--to a whopping 18 psi of boost and then--boom! Speed Dreams' super-clean chassis dyno room was covered with an antifreeze/water mix." "brand-new AFR 185 heads and a TFS Street Heat intake manifold installed on the stock short-block and were sealed with a set of Cometic head gaskets. Improving the induction jumped the power output from 390/494 to an impressive 465 rwhp and a ground-pounding 517 lb-ft of torque"

Threads Similar to: 5.0 9PSI Hellion turbo kit
Thread	Thread Starter	Forum	Replies	Last Post
Hellion Turbo	Lazyracer	2005 - 2010	14	October 19th, 2007 11:13 AM
For all u guys runnin hellion turbo set-ups	Saleenwolf720	99-04	3	September 5th, 2007 12:06 AM
Ordered a Hellion Turbo kit	Regency 2007	General Tech	27	June 15th, 2007 02:25 AM
Hellion Turbo	FLA Dreadhead	2005 - 2010	5	February 22nd, 2007 04:20 PM
Kenne Bell Supercharger or Hellion Turbo?	Chris02	99-04	29	November 20th, 2006 01:37 AM

January 19th, 2006, 11:23 PM	#2
ckthecerealkiller Enthusiast Join Date: Oct 2005 Location: Windsor CO Posts: 940 iTrader: 0 reviews	Very nice, I loved the read! Thanks again.

February 1st, 2006, 01:18 PM	#3
Anthony Regular Join Date: Jan 2006 Location: ATL GA Posts: 186 iTrader: 0 reviews	nice! now they need to get busy with a kit for the 94-95 cars!

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

All times are GMT -4. The time now is 08:32 PM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.