question for owners of dss 308's w/ listed mods

USMC SCOUT SNIPER · January 3rd, 2007, 09:48 PM

hey yall,
im getting my first mustang back from my brother in law. i sold it to him 4 years ago and regret it literally every day ha. my other bro built the car he is a caterpiller engineer and everything was/is within perfect specs when it was built ( only has 12k on it since i sold it) my question is this.......has anyone with a similar setup put it on the dyno and or knows what kind of numbers its putting down. only thing i know for sure is i toasted a few vettes and a single turbo porsche in the 2 months i owned it. mods are as follows.
308 dss block with twisted wedge heads
edelbrock performer rpm intake
30# injectors
fuel pressure is regulated w/ optimum fuel/air mixture
anderson ford custom grind cam.not sure on specs (M5P) but builds nasty power from 2500 to 7000 rpm
windage tray and crank scraper.
bbk equal length headers
3 inch pipes going to flowmaster 2 chamber offroad mufflers...no cats
underdrive pulleys
electric fan
3 core radiator ..runs at 170-180 degrees faithfully if i remember correctly
converted to mass air w/ 75 pro power throttle body..70mm (5 inch?) anderson ford power pipe
canted flycut trw pistons( specially cut for the heads) ..bah
anywho any help is greatly appreciated....thank God for mustangs i cant stand these frickin ricers...in fact im gonna put a train horn from www.hornblasters.com to honk the s**t out of them..yall should check out the website

USMC SCOUT SNIPER · January 6th, 2007, 08:39 PM

well i went and picked up my car today and promptly ripped a new turbo'ed vw and new A-Hole. he said he was pushing 373 Hp and didnt want no more of me..HA i just wish i had an idea how much mine was putting out...nobody has a clue eh? rick anderson of anderson ford motorsports ( yes the guy from MM &FF) in clinton , il said it was built as an 11 sec car...i know it hits sixty in the VERY low 4 second range.

USMC SCOUT SNIPER · January 6th, 2007, 08:40 PM

well i went and picked up my car today and promptly ripped a new turbo'ed vw and new A-Hole. he said he was pushing 373 Hp and didnt want no more of me..HA i just wish i had an idea how much mine was putting out...nobody has a clue eh? rick anderson of anderson ford motorsports ( yes the guy from MM &FF) in clinton , il said it was built as an 11 sec car...i know it hits sixty in the VERY low 4 second range.

January 3rd, 2007, 09:48 PM	#1
USMC SCOUT SNIPER Newbie Join Date: Jan 2007 Posts: 5 iTrader: 0 reviews	question for owners of dss 308's w/ listed mods hey yall, im getting my first mustang back from my brother in law. i sold it to him 4 years ago and regret it literally every day ha. my other bro built the car he is a caterpiller engineer and everything was/is within perfect specs when it was built ( only has 12k on it since i sold it) my question is this.......has anyone with a similar setup put it on the dyno and or knows what kind of numbers its putting down. only thing i know for sure is i toasted a few vettes and a single turbo porsche in the 2 months i owned it. mods are as follows. 308 dss block with twisted wedge heads edelbrock performer rpm intake 30# injectors fuel pressure is regulated w/ optimum fuel/air mixture anderson ford custom grind cam.not sure on specs (M5P) but builds nasty power from 2500 to 7000 rpm windage tray and crank scraper. bbk equal length headers 3 inch pipes going to flowmaster 2 chamber offroad mufflers...no cats underdrive pulleys electric fan 3 core radiator ..runs at 170-180 degrees faithfully if i remember correctly converted to mass air w/ 75 pro power throttle body..70mm (5 inch?) anderson ford power pipe canted flycut trw pistons( specially cut for the heads) ..bah anywho any help is greatly appreciated....thank God for mustangs i cant stand these frickin ricers...in fact im gonna put a train horn from www.hornblasters.com to honk the s**t out of them..yall should check out the website

Threads Similar to: question for owners of dss 308's w/ listed mods
Thread	Thread Starter	Forum	Replies	Last Post
Mods question	04gt	99-04	4	October 23rd, 2007 08:48 PM
This guy on ebay screwed me ( his phone number is listed )	1FastFox	The Clubhouse	62	October 17th, 2007 09:31 PM
Question for Colorado Mustang owners	Running_Rose	Southwest	3	October 15th, 2007 05:53 PM
Question for Convertible Owners with Cell Phones	Geezer	General Tech	5	June 28th, 2007 09:05 PM
Question for my fellow supercharged Cobra owners.	WilltheThrill	Racer's Corner	4	December 29th, 2006 07:18 PM

January 6th, 2007, 08:39 PM	#2
USMC SCOUT SNIPER Newbie Join Date: Jan 2007 Posts: 5 iTrader: 0 reviews	well i went and picked up my car today and promptly ripped a new turbo'ed vw and new A-Hole. he said he was pushing 373 Hp and didnt want no more of me..HA i just wish i had an idea how much mine was putting out...nobody has a clue eh? rick anderson of anderson ford motorsports ( yes the guy from MM &FF) in clinton , il said it was built as an 11 sec car...i know it hits sixty in the VERY low 4 second range.

January 6th, 2007, 08:40 PM	#3
USMC SCOUT SNIPER Newbie Join Date: Jan 2007 Posts: 5 iTrader: 0 reviews	well i went and picked up my car today and promptly ripped a new turbo'ed vw and new A-Hole. he said he was pushing 373 Hp and didnt want no more of me..HA i just wish i had an idea how much mine was putting out...nobody has a clue eh? rick anderson of anderson ford motorsports ( yes the guy from MM &FF) in clinton , il said it was built as an 11 sec car...i know it hits sixty in the VERY low 4 second range.

Remove Advertisements Sponsored Links
Forums at Modded Mustangs Advertisement Advertisement

All times are GMT -4. The time now is 09:04 PM.
Contact Us - Modded Mustangs - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.