Opinions on custom interior

97S281 · March 29th, 2009, 03:41 PM

That looks awesome man!!!!! I think I'd paint up the panel over the glove box to match the one over the guage bezels too. Maybe find a way to highlight that gt emblem on there as well.

Lazor05 · March 29th, 2009, 08:41 PM

I was going to paint the GT on the dash with some red and silver paint. And for the piece that lays ontop of the dash I was going to do it the same grey as the dash but with two red stripes that would line up with the ones on the ceiling. Im not sure if too many stripes would look bad though

Lazor05 · April 11th, 2009, 05:43 PM

I have had some trouble with these door panels but here is what I have so far. I ran out of red vinel too for the stripe. It's turning out better than I thought though.

MaroonNotchback408 · April 11th, 2009, 06:22 PM

How does headliner work? its on a piece of cardboard right and its not actually glued to the roof?

TKOTLARZ · April 11th, 2009, 06:27 PM

Originally Posted by MaroonNotchback408

How does headliner work? its on a piece of cardboard right and its not actually glued to the roof?

right,but u gotta glue the cardboard to the roof..

Lazor05 · April 11th, 2009, 06:33 PM

Originally Posted by TKOTLARZ

right,but u gotta glue the cardboard to the roof..

Yep, I just used the old cardboard and some spray adhesive. However on my car the cardboard is held up by the trim pieces. Not sure about your year though

MaroonNotchback408 · April 11th, 2009, 06:50 PM

Originally Posted by TKOTLARZ

right,but u gotta glue the cardboard to the roof..

Originally Posted by Lazor05

Yep, I just used the old cardboard and some spray adhesive. However on my car the cardboard is held up by the trim pieces. Not sure about your year though

Yeah that's what i thought that the other interior pieces hold it up not glue.

Lazor05 · July 17th, 2009, 06:30 PM

I havent updated this in a while.
Last week I got my carpet put in for the most part. I still have to fit it a little more thought. The carpet cost me $48 at home depot and $25 to rent a steamer. So I saved a little money doing it myself and I like this carpet alot.

1sl0w88 · July 18th, 2009, 10:42 AM

Looking good man! Keep up the work and keep us posted.

Traidmarx · July 18th, 2009, 01:02 PM

looks pretty cool man...nice job

sickfox · July 18th, 2009, 01:35 PM

nice work, where you from?

95StangMX · July 18th, 2009, 05:02 PM

Your seats look really good.....the other stuff is not bad dont get me wrong but I have been doing door panels and headliners for a long time and find them very easy. but the seats are the hard part and yours turned out great

Chris951 · July 18th, 2009, 08:39 PM

im not really feelin the carpet... but otherwise it looks really good

Lazor05 · July 19th, 2009, 03:10 PM

Thanks for the compliments guys! and yeah the carpet isnt laying how I would like it too but im gonna work on it.

And im from the Kansas City area

Originally Posted by 95StangMX

Your seats look really good.....the other stuff is not bad dont get me wrong but I have been doing door panels and headliners for a long time and find them very easy. but the seats are the hard part and yours turned out great

Thanks man. Yeah I thought they would be easy but I used some thinck vinel and its really tough to get it to do what I wasnt. The seats were pretty tough though. Im working on the back right now. So hopefully I will have them done soon.

Lazor05 · August 1st, 2009, 12:46 AM

Well I finished up half of the rear seat and I got the carpet to lay a little better im gonna keep working at it

sickfox · August 1st, 2009, 12:56 AM

it is layin better, still reminds me of my old apt. but good workman looks good and u saved a ton!

Lazor05 · August 1st, 2009, 01:15 AM

Its laying well except for the passenger side

Originally Posted by turbofoxbody

it is layin better, still reminds me of my old apt. but good workman looks good and u saved a ton!

Is that a bad thing? haha
and yeah I saved a whole lot doing it this way. I'm a very cheap person

sickfox · August 1st, 2009, 11:24 AM

its not a bad thing, but not a car thing either. it just dont look right you could have found a better match i think, but just be happy with it!! its still looking sharp.

95StangMX · August 1st, 2009, 03:36 PM

yeah burber (sp?) carpet isnt really made for cars or anything that doesnt really lay flat, Its too hard to get it to form. I dont even like it in a house to be honest, its a heavy traffic carpet for offices and commercial installations where something is needed that can take a lot of wear. I have done my own carpet a few times but I use the stuff made for interiors, speaker boxes, etc. because it forms better, but now I would just order a carpet kit instead of messing with cutting and forming it. Looks good though, especially the seats, very nice work

89Domindart · August 1st, 2009, 07:29 PM

NICE! Does the steamer make the carpet stick to the floor or just mold around the contours of the floor?

I want to do just about the same thing in my hatch area, I took the rear seats and the deadening material out.

March 29th, 2009, 03:41 PM	#21
97S281 Rollin' 18/ pushin' 2 1997 Saleen S281 Join Date: Feb 2007 Location: Zebulon N.C. Posts: 6,259 iTrader: 13 reviews	That looks awesome man!!!!! I think I'd paint up the panel over the glove box to match the one over the guage bezels too. Maybe find a way to highlight that gt emblem on there as well. __________________ MODS IN GARAGE NCMM ORIGINAL BLOWN 96-98 CREW MEMBER # 1

April 11th, 2009, 05:43 PM	#23
Lazor05 Regular Join Date: Mar 2009 Posts: 100 iTrader: 0 reviews	I have had some trouble with these door panels but here is what I have so far. I ran out of red vinel too for the stripe. It's turning out better than I thought though. Last edited by Lazor05; April 11th, 2009 at 05:44 PM. Reason: Picture

July 18th, 2009, 10:42 AM	#29
1sl0w88 Regular 88 LX 5.0 Convertable Join Date: Jun 2008 Location: South Carolina Posts: 482 iTrader: 0 reviews	Looking good man! Keep up the work and keep us posted. __________________ Robbie _________________ 88 LX Convertible 5.0 84 GT - Project 66 F100

July 18th, 2009, 01:02 PM	#30
Traidmarx Hardcore Enthusiast 1995 Mustang GT SLOWER THAN OLD PEOPLE FUCK..:-( Join Date: Aug 2008 Location: Roanoke,VA Posts: 2,079 iTrader: 0 reviews	looks pretty cool man...nice job __________________ 1995 Mustang GT..4.30's,BBK Longtubes, Off Road X-Pipe,Magnaflow Catback,BBK Intake,BBK Underdrive Pulleys Walbro 255lph pump,accel dizzy,MSD Coil,MSD 8.5 Super Conductors,front sway bar removed, more coming soon.

July 18th, 2009, 05:02 PM	#32
95StangMX MM Fanatic 95 Mustang GT depends how many people are pushing Join Date: Oct 2007 Location: Playa del Carmen, Mexico Posts: 3,223 iTrader: 0 reviews	Your seats look really good.....the other stuff is not bad dont get me wrong but I have been doing door panels and headliners for a long time and find them very easy. but the seats are the hard part and yours turned out great __________________ People should think about boarding up their glass house before starting a rock fight!

March 29th, 2009, 08:41 PM	#22
Lazor05 Regular Join Date: Mar 2009 Posts: 100 iTrader: 0 reviews	I was going to paint the GT on the dash with some red and silver paint. And for the piece that lays ontop of the dash I was going to do it the same grey as the dash but with two red stripes that would line up with the ones on the ceiling. Im not sure if too many stripes would look bad though

April 11th, 2009, 06:22 PM	#24
MaroonNotchback408 Banned Join Date: Mar 2009 Posts: 157 iTrader: 0 reviews	How does headliner work? its on a piece of cardboard right and its not actually glued to the roof?

July 17th, 2009, 06:30 PM	#28
Lazor05 Regular Join Date: Mar 2009 Posts: 100 iTrader: 0 reviews	I havent updated this in a while. Last week I got my carpet put in for the most part. I still have to fit it a little more thought. The carpet cost me $48 at home depot and $25 to rent a steamer. So I saved a little money doing it myself and I like this carpet alot.

July 18th, 2009, 08:39 PM	#33
Chris951 Hardcore Enthusiast 1991 mustang 5.0 Join Date: Aug 2007 Location: Mesa, AZ Posts: 1,933 iTrader: 0 reviews	im not really feelin the carpet... but otherwise it looks really good

August 1st, 2009, 12:46 AM	#35
Lazor05 Regular Join Date: Mar 2009 Posts: 100 iTrader: 0 reviews	Well I finished up half of the rear seat and I got the carpet to lay a little better im gonna keep working at it

August 1st, 2009, 03:36 PM	#39
95StangMX MM Fanatic 95 Mustang GT depends how many people are pushing Join Date: Oct 2007 Location: Playa del Carmen, Mexico Posts: 3,223 iTrader: 0 reviews	yeah burber (sp?) carpet isnt really made for cars or anything that doesnt really lay flat, Its too hard to get it to form. I dont even like it in a house to be honest, its a heavy traffic carpet for offices and commercial installations where something is needed that can take a lot of wear. I have done my own carpet a few times but I use the stuff made for interiors, speaker boxes, etc. because it forms better, but now I would just order a carpet kit instead of messing with cutting and forming it. Looks good though, especially the seats, very nice work __________________ People should think about boarding up their glass house before starting a rock fight! Last edited by 95StangMX; August 1st, 2009 at 03:40 PM.

August 1st, 2009, 07:29 PM	#40
89Domindart Enthusiast 89mustanglx5.0 Join Date: Jul 2006 Location: smyrna ga Posts: 791 Blog Entries: 4 iTrader: 0 reviews	NICE! Does the steamer make the carpet stick to the floor or just mold around the contours of the floor? I want to do just about the same thing in my hatch area, I took the rear seats and the deadening material out. __________________ 89 5.0 for sale! in the classifieds section

Remove Advertisements Sponsored Links
Forums at Modded Mustangs Advertisement Advertisement

Threads Similar to: Opinions on custom interior
Thread	Thread Starter	Forum	Replies	Last Post
Custom title, help	timberwolf	The Clubhouse	35	February 1st, 2009 07:29 PM
Custom Engraving, Opinions?	Drtbkercr5	The Clubhouse	19	February 1st, 2009 03:48 PM
Want to custom my v6 mustang	BlueMustang86	2005 - 2010 V6	14	July 13th, 2008 05:49 PM
Custom Grills?	SuperSnake428	Visual	0	February 18th, 2008 05:57 PM

All times are GMT -4. The time now is 10:02 AM.
Contact Us - Modded Mustangs - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.