What is this peice?

PolishSasquatch · May 1st, 2009, 11:42 PM

I have on of these on the return line by the tank, and its leaking

can I replace it witgh this?

1FUN4RD · May 1st, 2009, 11:52 PM

I would say no. You will need a new line.

PolishSasquatch · May 2nd, 2009, 12:00 AM

yeah im goign to get a new line eventually, for nwo i had to cut it in two palce and patch it using rubber hose and clamp, I cant access the whole thing without a lift, and my budget doenst permit it at this time. Can I do that as a temp fix?

1FUN4RD · May 2nd, 2009, 12:12 AM

If you do that. Make sure you get the high pressure gas hose as regular gas line won't hold. The high pressure gas hose looks the same but has a stiff plastic liner.

PolishSasquatch · May 2nd, 2009, 12:21 AM

nice, thanks for the heads up

Notcho · May 2nd, 2009, 12:27 AM

Damn that thing is rusted..

Not sure about the barb fitting. Depends on the amount of pressure going through it.. after all it did make the actual pressure fitting leak..

If it is a return line, it would have more fuel going thru it/more pressure at LOW RPM (less fuel used, more returned to tank) since the pump runs at a constant speed...

JBIGBOOTSY · May 2nd, 2009, 02:00 AM

Originally Posted by 89 5.0 LX

Damn that thing is rusted..

Not sure about the barb fitting. Depends on the amount of pressure going through it.. after all it did make the actual pressure fitting leak..

If it is a return line, it would have more fuel going thru it/more pressure at LOW RPM (less fuel used, more returned to tank) since the pump runs at a constant speed...

2 screw clamps and FI hose, it will hold

89lx · May 2nd, 2009, 07:24 AM

just go to napa and by a new quick connector and borrow the tool to put it on,15 mins the most on ur bk in the drive way

or you can cut it off and get a steal barb that jams in the line and on the other end it take a hose

May 1st, 2009, 11:42 PM	#1
PolishSasquatch Regular Join Date: Mar 2009 Posts: 97 iTrader: 0 reviews	What is this peice? I have on of these on the return line by the tank, and its leaking can I replace it witgh this?

May 1st, 2009, 11:52 PM	#2
1FUN4RD MMs Ford Racing Nut Swinger 2007 MUSTANG GT Join Date: Feb 2008 Location: CENTRAL IOWA Posts: 4,360 iTrader: 3 reviews	I would say no. You will need a new line. __________________ www.1fun4rd.blogspot.com

May 2nd, 2009, 12:12 AM	#4
1FUN4RD MMs Ford Racing Nut Swinger 2007 MUSTANG GT Join Date: Feb 2008 Location: CENTRAL IOWA Posts: 4,360 iTrader: 3 reviews	If you do that. Make sure you get the high pressure gas hose as regular gas line won't hold. The high pressure gas hose looks the same but has a stiff plastic liner. __________________ www.1fun4rd.blogspot.com

May 2nd, 2009, 12:27 AM	#6
Notcho No bucks, no Buck Rogers Join Date: Oct 2006 Location: New Braunfels, Tx / Seguin, Tx Posts: 4,830 iTrader: 0 reviews	Damn that thing is rusted.. Not sure about the barb fitting. Depends on the amount of pressure going through it.. after all it did make the actual pressure fitting leak.. If it is a return line, it would have more fuel going thru it/more pressure at LOW RPM (less fuel used, more returned to tank) since the pump runs at a constant speed... __________________ '87 2.3 Notch with +4 cylinder mod MM's Resident Aggie Black Stang Crew Member #11

May 2nd, 2009, 07:24 AM	#8
89lx Regular 1989 LX coupe 5.0L Join Date: Dec 2007 Location: NS Canada Posts: 496 iTrader: 0 reviews	just go to napa and by a new quick connector and borrow the tool to put it on,15 mins the most on ur bk in the drive way or you can cut it off and get a steal barb that jams in the line and on the other end it take a hose __________________

May 2nd, 2009, 12:00 AM	#3
PolishSasquatch Regular Join Date: Mar 2009 Posts: 97 iTrader: 0 reviews	yeah im goign to get a new line eventually, for nwo i had to cut it in two palce and patch it using rubber hose and clamp, I cant access the whole thing without a lift, and my budget doenst permit it at this time. Can I do that as a temp fix?

May 2nd, 2009, 12:21 AM	#5
PolishSasquatch Regular Join Date: Mar 2009 Posts: 97 iTrader: 0 reviews	nice, thanks for the heads up

Remove Advertisements Sponsored Links
Forums at Modded Mustangs Advertisement Advertisement

Threads Similar to: What is this peice?
Thread	Thread Starter	Forum	Replies	Last Post
new one peice bbk 78mm throttle body	kennyGT	99-04	16	July 15th, 2009 11:59 PM
check it out!! new peice!	SilverSixxer	Visual	13	February 5th, 2009 04:35 PM
new interior peice!	SilverSixxer	Visual	20	November 25th, 2008 05:59 PM
rubber peice in clutch?	DeMello	99-04	31	July 31st, 2008 10:45 PM
mystery peice	v6Beast	V6 Mustangs	14	February 26th, 2007 09:52 PM

All times are GMT -4. The time now is 10:39 PM.
Contact Us - Modded Mustangs - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.