[89fox5.0]

I'm fairly new with car modifications and I'm gonna start working on my 89 LX 5.0 hatch soon. Its pretty close to stock at the moment(only a Cobra lower and upper intake, and an E303 cam has been added along with some suspension work)
These are the parts I was thinking of changing first:
BBK 1-5/8" long tube headers
BBK 2.5" X-pipe
Flowmaster American Thunder Exhaust
BBK cold air intake
190 LPH fuel pump
24 lbs/hour fuel injectors
Edelbrock 70mm Throttle body
X303 cam

This is probably just a start and was hoping for some thoughts and suggestions.

[mikebert]

With all those mods to the air induction + injectors, you need to get a big MAF sensor. Also, that X303 is huge. I doubt going from E303 -> X303 would net you any real horsepower with stock heads.

Give it 5 seconds and someone will show up and tell you to get Trickflow Twisted Wedge heads.

As long as you're putting a long list together, don't forget underdrive pullies.

[Tony_90fox]

Sell the cobra upper and lower, get the trickflow top end kit, it includes a trickflow cam and it is pretty good.

[89fox5.0]

Originally Posted by Tony_90fox Sell the cobra upper and lower, get the trickflow top end kit, it includes a trickflow cam and it is pretty good.

How much does that kit normally cost. and does it come with camshaft, heads, upper and lower manifold, timing chain rockers valve covers and pushrods?(wanna make sure im looking at the right kit)

[Tony_90fox]

yep, that is it...

www.summitracing.com

i think the track heat series it about $2500