Project: POS

Chris951 · July 18th, 2009, 08:36 PM

Originally Posted by snosourfur

is it just me or does the red interior in any foxbody just seem .....ewww

my freind's gt has mint red and black interior and it's actually pretty nice

fs308 · July 25th, 2009, 06:04 PM

couple more goodies on the way.

vic jr, aluminum radiator, bolt kit, torque link. still need some time for the interior so i can get it to the fab shop

JBIGBOOTSY · July 25th, 2009, 08:07 PM

Originally Posted by 1slo5.0

Factory Stock.

"I feel Rich @ RGR Engines builds the most powerful and innovative engines on the planet. He built my 2 time Factory Stock World Championship engine which also posted the quickest ET in Class history an 11.07. This same engine posted 10.96 @ 122mph on BFG's at a non sanctioned event. Even more improbably is the fact is sports Unported E7 factory casting heads Rich did his magical valve job on. I can't say anything more about his work other than the Records and Championships speak for themselves."

RGR Engines Testimonials

You can use gt40, and gt40p heads in FS I thought? milling, 0 decked blocks, coated bearrings, stock lift cams with secret durration, and a F&%K load of handed down secrets over the years, makes these engines far from stock. In fact the only "stock" part of FS, is in the name.

fs308 · July 25th, 2009, 08:10 PM

yes sir that is correct. that arent allowed to do any port matching or tricks like that. they are allowed valve jobs and if i remember correctly blend the bowls

1slo5.0 · July 25th, 2009, 08:27 PM

Originally Posted by JBIGBOOTSY

You can use gt40, and gt40p heads in FS I thought? milling, 0 decked blocks, coated bearrings, stock lift cams with secret durration, and a F&%K load of handed down secrets over the years, makes these engines far from stock. In fact the only "stock" part of FS, is in the name.

You can use GT40 heads but the example I gave was a guy that ran 10.90 with unported E7 heads. These engines don't make insane horsepower. This is a prime example of the whole combination (car) working together.

fs308 · July 29th, 2009, 03:46 AM

1slo50 you obviously had some fast cars anything else you would like to add?

89Domindart · July 29th, 2009, 06:08 AM

Okay, I read the entire thread. Looks good, but whats up w that flexing hood! HOlly cow. Anyways , looks good .

fs308 · July 29th, 2009, 10:42 AM

its the way someone had it sitting. my brother is going to fix it and i cant complain for what i paid for it

1slo5.0 · July 29th, 2009, 10:46 AM

Originally Posted by fs308

1slo50 you obviously had some fast cars anything else you would like to add?

Nope, I think you are doing a hell of a job so far. I can't wait to see it finished.

fs308 · July 29th, 2009, 02:32 PM

i cant wait either but it wont be till sometime next year. the goal is to get ALL of the suspension done this year, hopefully the rear end and strange brakes.

fs308 · July 29th, 2009, 04:44 PM

more parts coming if this guy buys my crank and rods like he says

fs308 · July 30th, 2009, 04:28 AM

GTDOWORK · July 30th, 2009, 05:08 PM

Im new to modded mustangs. enjoying the site so far. Just wanted to say HI

JBIGBOOTSY · July 30th, 2009, 05:32 PM

Originally Posted by GTDOWORK

Im new to modded mustangs. enjoying the site so far. Just wanted to say HI

Hello again there sailor.

1slo5.0 · July 30th, 2009, 07:26 PM

Looks like somebody is trying to get some posts under their belt for the classifieds section....

JBIGBOOTSY · July 30th, 2009, 10:39 PM

Originally Posted by 1slo5.0

Looks like somebody is trying to get some posts under their belt for the classifieds section....

Check out his profile, and go to read a threads started haha.

95BlackStang · July 30th, 2009, 11:00 PM

Originally Posted by JBIGBOOTSY

Check out his profile, and go to read a threads started haha.

all his post are the same lol

great work looks like its gana be a good build

fs308 · August 3rd, 2009, 01:51 AM

hey hey im all for people whoring my thread but at least talk about my car LOL

im just waiting for the guy to finish paying me and i already got the next round of parts picked out haha

fs308 · August 5th, 2009, 02:42 PM

axles, gears, 9in ends, and studs being ordered tomorrow

fs308 · August 6th, 2009, 12:03 PM

1slo50 do you know anything about gun drilled axles? is there a weight limit on them?

July 25th, 2009, 06:04 PM	#142
fs308 Enthusiast Join Date: Dec 2007 Posts: 519 iTrader: 0 reviews	couple more goodies on the way. vic jr, aluminum radiator, bolt kit, torque link. still need some time for the interior so i can get it to the fab shop __________________ 87 Notch Doing a lot with a little _____________________________ lightweight, stock motor, and 12's?

July 25th, 2009, 08:10 PM	#144
fs308 Enthusiast Join Date: Dec 2007 Posts: 519 iTrader: 0 reviews	yes sir that is correct. that arent allowed to do any port matching or tricks like that. they are allowed valve jobs and if i remember correctly blend the bowls __________________ 87 Notch Doing a lot with a little _____________________________ lightweight, stock motor, and 12's?

July 29th, 2009, 03:46 AM	#146
fs308 Enthusiast Join Date: Dec 2007 Posts: 519 iTrader: 0 reviews	1slo50 you obviously had some fast cars anything else you would like to add? __________________ 87 Notch Doing a lot with a little _____________________________ lightweight, stock motor, and 12's?

July 29th, 2009, 06:08 AM	#147
89Domindart Enthusiast 89mustanglx5.0 Join Date: Jul 2006 Location: smyrna ga Posts: 791 Blog Entries: 4 iTrader: 0 reviews	Okay, I read the entire thread. Looks good, but whats up w that flexing hood! HOlly cow. Anyways , looks good . __________________ 89 5.0 for sale! in the classifieds section

July 29th, 2009, 10:42 AM	#148
fs308 Enthusiast Join Date: Dec 2007 Posts: 519 iTrader: 0 reviews	its the way someone had it sitting. my brother is going to fix it and i cant complain for what i paid for it __________________ 87 Notch Doing a lot with a little _____________________________ lightweight, stock motor, and 12's?

July 29th, 2009, 02:32 PM	#150
fs308 Enthusiast Join Date: Dec 2007 Posts: 519 iTrader: 0 reviews	i cant wait either but it wont be till sometime next year. the goal is to get ALL of the suspension done this year, hopefully the rear end and strange brakes. __________________ 87 Notch Doing a lot with a little _____________________________ lightweight, stock motor, and 12's?

July 29th, 2009, 04:44 PM	#151
fs308 Enthusiast Join Date: Dec 2007 Posts: 519 iTrader: 0 reviews	more parts coming if this guy buys my crank and rods like he says __________________ 87 Notch Doing a lot with a little _____________________________ lightweight, stock motor, and 12's?

July 30th, 2009, 04:28 AM	#152
fs308 Enthusiast Join Date: Dec 2007 Posts: 519 iTrader: 0 reviews	__________________ 87 Notch Doing a lot with a little _____________________________ lightweight, stock motor, and 12's?

July 30th, 2009, 05:08 PM	#153
GTDOWORK Newbie 1995 Mustang GT Join Date: Jul 2009 Location: Sacramento Posts: 5 iTrader: 0 reviews	Im new to modded mustangs. enjoying the site so far. Just wanted to say HI

July 30th, 2009, 07:26 PM	#155
1slo5.0 MM Ninjas! 1990 Mustang LX 9.36@143 mph Join Date: Jan 2006 Location: North Fond du Lac, Wisconsin Posts: 11,375 iTrader: 1 reviews	Looks like somebody is trying to get some posts under their belt for the classifieds section.... __________________ My daily driver has 16 cylinders and 4400hp @ 1000 rpm.... ***1988 Mustang GT - Stock....almost

August 3rd, 2009, 01:51 AM	#158
fs308 Enthusiast Join Date: Dec 2007 Posts: 519 iTrader: 0 reviews	hey hey im all for people whoring my thread but at least talk about my car LOL im just waiting for the guy to finish paying me and i already got the next round of parts picked out haha __________________ 87 Notch Doing a lot with a little _____________________________ lightweight, stock motor, and 12's?

August 5th, 2009, 02:42 PM	#159
fs308 Enthusiast Join Date: Dec 2007 Posts: 519 iTrader: 0 reviews	axles, gears, 9in ends, and studs being ordered tomorrow __________________ 87 Notch Doing a lot with a little _____________________________ lightweight, stock motor, and 12's?

August 6th, 2009, 12:03 PM	#160
fs308 Enthusiast Join Date: Dec 2007 Posts: 519 iTrader: 0 reviews	1slo50 do you know anything about gun drilled axles? is there a weight limit on them? __________________ 87 Notch Doing a lot with a little _____________________________ lightweight, stock motor, and 12's?

Remove Advertisements Sponsored Links
Forums at Modded Mustangs Advertisement Advertisement

Threads Similar to: Project: POS
Thread	Thread Starter	Forum	Replies	Last Post
Another POS!	Regency 2007	The Clubhouse	1	March 11th, 2008 02:00 AM
need help pos unit	tom2000r	99-04	12	February 25th, 2008 07:46 PM
Project pos car stage one	supercharged04	Pictures	5	January 25th, 2008 08:48 PM
87 dakota POS	Ninjawafers!	All Other Vehicles	1	January 15th, 2007 06:13 AM

All times are GMT -4. The time now is 03:31 AM.
Contact Us - Modded Mustangs - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.