need help head/intake install

superbean · July 22nd, 2009, 02:11 PM

Nothing wrong with starting out small and then upping the shot once your comfortable with the car.

A twisted wedge headed car with a supporting intake and a 75 shot should put you right at 350whp.. perhaps a little more with that custom cam and ported heads.

Right at the power level to where you haven't spent a shit ton of money yet, but you wont make enough power to start constantly breaking stuff lol (axles, t5's)

93mustank · July 22nd, 2009, 02:35 PM

Originally Posted by flyin ryan

haha I've been bugging you for info and haven't seen chit but now I have to put out

If you would read the fuggin thread everything you asked for was already posted...

93hatch · July 22nd, 2009, 02:58 PM

slap on some 4v heads and 4 e303 cams

stfudvs · July 22nd, 2009, 03:53 PM

going to rock this intake
Trick Flow Specialties TFS-51511008 - Trick Flow® Box-R-Series Intake Manifolds for Ford 5.0L – SummitRacing.com

deliver an excellent balance of airflow distribution and velocity to increase low-end torque and provide superior high-rpm horsepower

so far i haven't found anything stating i WOULDN'T pass emissions with this setup
and as stated it will deliver low end torq as well as high rang rpm and that sounds good to me

baine21225 · July 22nd, 2009, 07:04 PM

Wont clear the stock hood either

stfudvs · July 22nd, 2009, 07:46 PM

not worried about that, have fiberglass 3" cowl i figured it wouldnt clear after i put in a 1" spacer, just need to be sure i will pass emissions i cant find an egr that is 90mm lol

88Saleen · July 22nd, 2009, 07:58 PM

Originally Posted by stfudvs

going to rock this intake
Trick Flow Specialties TFS-51511008 - Trick Flow® Box-R-Series Intake Manifolds for Ford 5.0L – SummitRacing.com

so far i haven't found anything stating i WOULDN'T pass emissions with this setup
and as stated it will deliver low end torq as well as high rang rpm and that sounds good to me

is that something like the comp cams box style intake?

baine21225 · July 22nd, 2009, 08:04 PM

if your spending that money i'd go with something like e3sean has, i believe it's an efi victor with the power elbow......pretty slick looking shit

1slo5.0 · July 22nd, 2009, 08:10 PM

Originally Posted by 88Saleen

is that something like the comp cams box style intake?

No, nothing like it at all. Much better than the Comp intake.

stfudvs · July 22nd, 2009, 08:45 PM

Originally Posted by baine21225

if your spending that money i'd go with something like e3sean has, i believe it's an efi victor with the power elbow......pretty slick looking shit

i believe what your talking about is something like this

? yea those are pretty hot, seems like a good concept ?

88Saleen · July 22nd, 2009, 08:50 PM

Originally Posted by 1slo5.0

No, nothing like it at all. Much better than the Comp intake.

how about the Edelbrock Victor EFI intake? pretty decent?

stfudvs · July 22nd, 2009, 08:58 PM

Originally Posted by 88Saleen

how about the Edelbrock Victor EFI intake? pretty decent?

only ones i could find were "non emissions racing applications"

here in reno i have to be able to pass emissions

88Saleen · July 22nd, 2009, 09:49 PM

ah alright. im tryin to figure out which intake to put on my build

1slo5.0 · July 22nd, 2009, 10:03 PM

Originally Posted by 88Saleen

how about the Edelbrock Victor EFI intake? pretty decent?

Yes they are good intakes but it all depends on the application.

stfudvs · July 22nd, 2009, 10:25 PM

Originally Posted by 88Saleen

ah alright. im tryin to figure out which intake to put on my build

what are you building ?

im still debating between systemax 2 and trick flow box r, but leaning twards the trick flow

stfudvs · July 23rd, 2009, 10:26 AM

was told last night while picking up some stuff from summit that the trickflow box intakes will not pass emissions

lame

stfudvs · July 23rd, 2009, 10:48 AM

are these crap ?
BBK: 1986-1993 Ford Mustang 5.0L Intake Manifold

i hope not because they are fucking beautiful

baine21225 · July 23rd, 2009, 11:26 AM

pass on that

89StangGT · July 23rd, 2009, 11:33 AM

Originally Posted by stfudvs

are these crap ?
BBK: 1986-1993 Ford Mustang 5.0L Intake Manifold

i hope not because they are fucking beautiful

It seems people have poor results with the SSI intakes on these cars.

stfudvs · July 23rd, 2009, 01:59 PM

thats a shame, i just read about people saying the fuel system it comes with is crap as well

looks like it will be a systemax 2 unless i find a box intake that i can pass emissions with and has good torq and a nice wide power range

July 22nd, 2009, 02:11 PM	#101
superbean Hardcore Enthusiast 1998 Cobra 13.24@105.66 Join Date: Aug 2008 Location: North Carolina Posts: 1,778 iTrader: 0 reviews	Nothing wrong with starting out small and then upping the shot once your comfortable with the car. A twisted wedge headed car with a supporting intake and a 75 shot should put you right at 350whp.. perhaps a little more with that custom cam and ported heads. Right at the power level to where you haven't spent a shit ton of money yet, but you wont make enough power to start constantly breaking stuff lol (axles, t5's) __________________ weeee foooord!

July 22nd, 2009, 02:58 PM	#103
93hatch Banned 1992 Lx 11.39@119.24 Join Date: Jan 2008 Location: Az Posts: 11,665 iTrader: 0 reviews	slap on some 4v heads and 4 e303 cams __________________ [QUOTE=93mustank;2577445]We speed tested my right arm for quickness in shifts... So he could design the cam for proper shift recovery.[/QUOTE]

July 22nd, 2009, 07:04 PM	#105
baine21225 MM Fanatic Join Date: Jun 2007 Location: Baltimore, MD Posts: 4,338 iTrader: 1 reviews	Wont clear the stock hood either __________________ "Whip out your dick you'll either get it sucked or get smacked..." "That's how Dad did it, that's how America does it... and it's worked out pretty well so far..."

July 22nd, 2009, 07:46 PM	#106
stfudvs Regular 302 5.0 Join Date: Jan 2009 Posts: 328 iTrader: 0 reviews	not worried about that, have fiberglass 3" cowl i figured it wouldnt clear after i put in a 1" spacer, just need to be sure i will pass emissions i cant find an egr that is 90mm lol __________________ if you were on a bicycle and we were going up hill i could beat you in a race

July 22nd, 2009, 08:04 PM	#108
baine21225 MM Fanatic Join Date: Jun 2007 Location: Baltimore, MD Posts: 4,338 iTrader: 1 reviews	if your spending that money i'd go with something like e3sean has, i believe it's an efi victor with the power elbow......pretty slick looking shit __________________ "Whip out your dick you'll either get it sucked or get smacked..." "That's how Dad did it, that's how America does it... and it's worked out pretty well so far..."

July 22nd, 2009, 09:49 PM	#113
88Saleen Enthusiast 1988 Mustang Join Date: Apr 2008 Location: Grand Blanc, Michigan Posts: 832 iTrader: 0 reviews	ah alright. im tryin to figure out which intake to put on my build

July 23rd, 2009, 10:26 AM	#116
stfudvs Regular 302 5.0 Join Date: Jan 2009 Posts: 328 iTrader: 0 reviews	was told last night while picking up some stuff from summit that the trickflow box intakes will not pass emissions lame __________________ if you were on a bicycle and we were going up hill i could beat you in a race

July 23rd, 2009, 10:48 AM	#117
stfudvs Regular 302 5.0 Join Date: Jan 2009 Posts: 328 iTrader: 0 reviews	are these crap ? BBK: 1986-1993 Ford Mustang 5.0L Intake Manifold i hope not because they are fucking beautiful __________________ if you were on a bicycle and we were going up hill i could beat you in a race

July 23rd, 2009, 11:26 AM	#118
baine21225 MM Fanatic Join Date: Jun 2007 Location: Baltimore, MD Posts: 4,338 iTrader: 1 reviews	pass on that __________________ "Whip out your dick you'll either get it sucked or get smacked..." "That's how Dad did it, that's how America does it... and it's worked out pretty well so far..."

July 23rd, 2009, 01:59 PM	#120
stfudvs Regular 302 5.0 Join Date: Jan 2009 Posts: 328 iTrader: 0 reviews	thats a shame, i just read about people saying the fuel system it comes with is crap as well looks like it will be a systemax 2 unless i find a box intake that i can pass emissions with and has good torq and a nice wide power range __________________ if you were on a bicycle and we were going up hill i could beat you in a race

Remove Advertisements Sponsored Links
Forums at Modded Mustangs Advertisement Advertisement

LinkBacks (?) LinkBack to this Thread: http://www.moddedmustangs.com/forums/5-0-mustangs/128916-need-help-head-intake-install.html
Posted By	For	Type	Date
MidSouth Drag Racing • View topic - Another Stupid Colorado Drivers thread. 225cc AFR's on a 5.3	This thread	Refback	February 18th, 2010 11:17 PM
MidSouth Drag Racing • View topic - Another Stupid Colorado Drivers thread. 225cc AFR's on a 5.3	This thread	Refback	July 23rd, 2009 12:08 PM
MidSouth Drag Racing • View topic - Another Stupid Colorado Drivers thread. 225cc AFR's on a 5.3	This thread	Refback	July 22nd, 2009 06:13 PM
MidSouth Drag Racing • View topic - Another Stupid Colorado Drivers thread. 225cc AFR's on a 5.3	This thread	Refback	July 22nd, 2009 04:57 PM
5.3L with new TFS 205 heads - Page 5 - 355Nation Chevy Colorado & GMC Canyon Forum	This thread	Refback	July 22nd, 2009 04:01 AM

Threads Similar to: need help head/intake install
Thread	Thread Starter	Forum	Replies	Last Post
head lights install	hedgehog	4V / SVT	0	November 8th, 2008 12:53 PM
5.0 need a tune after head and intake install?	kid	5.0 Mustangs	17	April 23rd, 2008 01:02 AM
99 head unit install	bubagump17	99-04	0	December 4th, 2007 04:02 PM
head unit install (yes another 1)	BlackIce	Audio/Video	4	February 22nd, 2007 05:34 PM
Need Help With Head Unit Install	Teggy_Boy	Audio/Video	1	January 18th, 2007 07:54 PM

All times are GMT -4. The time now is 05:52 PM.
Contact Us - Modded Mustangs - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.