injector size?

92_LX_5.0 · February 10th, 2007, 06:22 PM

i have been asking alot of questions throughout my engine build, i am at the point now where i am about to order my injectors.....im running the b303 cam, stock bottom end, edelbrock performer intake II and afr 165cc heads...also a 70mm throttle body...i know i need to change the mass air meter but i am not sure on the size of injectors. one last question, does anyone recommend a kevlar or just oem pilot bearings??

mdvaldosta · February 10th, 2007, 06:36 PM

24# should be enough.

WAVEBYE · February 10th, 2007, 06:38 PM

thats what i was gonna say since they came stock in the 93 cobras

vfast · February 10th, 2007, 11:36 PM

to cobra's 'puter had some crappy lobes to get the 24's to work as 19's would have work

5-0stank · February 11th, 2007, 12:14 AM

Originally Posted by vfast

to cobra's 'puter had some crappy lobes to get the 24's to work as 19's would have work

Stangzilla · February 11th, 2007, 02:41 AM

I would get 36lb injectors to leave room to grow. They are not to big and can be run on a mild build. If you plan on a S/C, turbo, nitrous later on or something else you will be ready and they are not all that much more.. Saves having to sell your 24's and upgrade later on... Just a thought...

Stangzilla · February 11th, 2007, 02:42 AM

Just get a good quality pilot bearing from Ford or something. No Autozone crap or anything like that and you will be fine....

February 10th, 2007, 06:22 PM	#1
92_LX_5.0 Newbie Join Date: Jan 2007 Posts: 39	injector size? i have been asking alot of questions throughout my engine build, i am at the point now where i am about to order my injectors.....im running the b303 cam, stock bottom end, edelbrock performer intake II and afr 165cc heads...also a 70mm throttle body...i know i need to change the mass air meter but i am not sure on the size of injectors. one last question, does anyone recommend a kevlar or just oem pilot bearings??

February 10th, 2007, 06:38 PM	#3
WAVEBYE Hardcore Enthusiast 03 Mustang GT Twin Turbo Join Date: Sep 2006 Location: Southaven,MS Posts: 1,467	thats what i was gonna say since they came stock in the 93 cobras __________________ Nobody gonna take my car Im gonna race it to the ground Nobody gonna beat my car Its gonna break the speed of sound Oooh its a killing machine Its got everything Like a driving power big fat tires And everything - Deep Purple

February 10th, 2007, 11:36 PM	#4
vfast Hardcore Enthusiast Join Date: Aug 2005 Location: being voted #1 asshole Posts: 1,075	to cobra's 'puter had some crappy lobes to get the 24's to work as 19's would have work __________________ EVERYONE IS ENTITLED TO MY OPINION 6'ers are for kids 1965 chevelle SS 421 sbc 6 speed, 3.90 gears,alum d-shaft, brodix heads,roller cam,925 AED carb...grocery getter

February 11th, 2007, 02:41 AM	#6
Stangzilla MM Fanatic Join Date: Aug 2006 Location: On my way to Baines's house!! Posts: 3,095	I would get 36lb injectors to leave room to grow. They are not to big and can be run on a mild build. If you plan on a S/C, turbo, nitrous later on or something else you will be ready and they are not all that much more.. Saves having to sell your 24's and upgrade later on... Just a thought... __________________ Rotating The Earth 1320 Feet At A Time!! The very existence of flamethrowers proves that sometime, somewhere, someone said to themselves, “You know, I want to set those people over there on fire, but I’m just not close enough to get the job done.”

February 11th, 2007, 02:42 AM	#7
Stangzilla MM Fanatic Join Date: Aug 2006 Location: On my way to Baines's house!! Posts: 3,095	Just get a good quality pilot bearing from Ford or something. No Autozone crap or anything like that and you will be fine.... __________________ Rotating The Earth 1320 Feet At A Time!! The very existence of flamethrowers proves that sometime, somewhere, someone said to themselves, “You know, I want to set those people over there on fire, but I’m just not close enough to get the job done.”

Sponsored Links	Remove Advertisements
Forums at Modded Mustangs Advertisement

February 10th, 2007, 06:36 PM	#2
mdvaldosta Maintenance Man 2002 Mustang GT 11.47@120.58 Join Date: Aug 2005 Location: Valdosta, GA Posts: 3,943	24# should be enough.

Threads Similar to: injector size?
Thread	Thread Starter	Forum	Replies	Last Post
Injector Size	mmvi	V6 Mustangs	11	November 10th, 2007 05:11 PM
Suggested injector size??	jam77	5.0 Mustangs	12	October 17th, 2007 01:40 AM
Injector size and MAF conversion?	Never2fasst	5.0 Mustangs	1	August 28th, 2007 05:16 PM
Fuel injector size/colors?	fastsvtss	Engine	3	April 19th, 2007 04:40 PM
Fuel injector size?	WAR-PARTY	Engine	4	February 19th, 2007 10:50 PM

All times are GMT -4. The time now is 09:54 AM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2009, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.