gt ground effects

347tt · February 15th, 2007, 04:28 PM

I've seen a few pictures that look like the bottom of the front gt bumper sits higher than the side skirts and the back bumper. Is this true for all gt kits or do my eyes decieve me

I could have sworn that I;ve seen the bumpers and side skirts sitting flush all the way around.

Tony_90fox · February 15th, 2007, 06:04 PM

Originally Posted by 347tt

I've seen a few pictures that look like the bottom of the front gt bumper sits higher than the side skirts and the back bumper. Is this true for all gt kits or do my eyes decieve me I could have sworn that I;ve seen the bumpers and side skirts sitting flush all the way around.

Should look like this...

wraitherlx · February 15th, 2007, 06:22 PM

it probably looks that way b/c the front angles up a little

347tt · February 16th, 2007, 10:47 PM

THATS WHAT I THOUGHT BUT SOME OF THE PICTURE ANGLES MAKE IT LOOK LIKE IT'S WAY OFF AND THEN SOME LOOK LIKE THEY ARE FLUSH ALL AROUND. DO YOU THINK THAT IT'S POSSIBLE THAT AN AFTERMARKET PRODUCT COULD BE FLUSH ALL THE WAY AROUND, BECAUSE THAT'S WHAT I'M REALLY LOOKING FOR. IF NOT HOW MUCH WORK DO YOU THINK WOULD BE PUT IN ON MAKING IT THAT WAY??

wraitherlx · February 16th, 2007, 11:54 PM

there are body kits that are flush all the way around you just got match up front end, to side, to rear, if you get what i mean. Dont be like the ricers and mis-match. IMO though the fox GT's look fine with out anything other then hoods, wings, and maybe Cobra rear and sides. That is what im going for. As far as buying an aftermarket kit depending on where you get it from modification may be needed, especially fiberglass. On my 99 I got the Black widow cobra kit the front was urethane as well as the rear so they fit perfectly but the sides were fiberglass and they came in about 3 inches too short on each skirt so me and my buddy took it to his shop and cut it and added more glass for length. what kit were you thinking of going with?

347tt · February 17th, 2007, 11:51 AM

IM DEFINITELY GOING WITH THE GT KIT. ANYTHING ELSE IS TO GAWTY (SORRY ABOUT THE SPELLING) FOR ME. I LOVE THE GT KIT IT'S SIMPLE YET RACY. I JUST WANT IT FLUSH ALL THE WAY AROUND. IT DOESN'T LOOK LIKE IT WOULD BE TO HARD TO ADD MORE "GLASS TO THE ASS", THERE ARE PLENTY OF GOOD SPOTS TO CUT, IT'S JUST THE FRONT THAT BOTHERS ME. I THINK THAT I WOULD RATHER MOD THAN SPEND AND OUTRAGEOUS AMOUNT ANYWAY, IT MAKES IT MORE PERSONABLE TOO.

Dell · February 17th, 2007, 12:25 PM

I'm sportin one of those Gawdy kits on my GT

...But i have all the stock GT kit collecting dust in my basement..Front clip, rear, and all the side pieces.

I'd sell it all dirt cheap if ya want something to experiment with?...All in good shape cosmeticly other than paint.....I'd rather hook a fellow DIY Stang owner up than just throw it all over back....Just an idea Man.

347tt · February 17th, 2007, 12:43 PM

DIFFERENT STROKES FOR DIFFERENT FOLKS MY MAN. I WOULD LOVE TO TAKE THAT GT KIT OFF YOUR HANDS. WHERE DO YOU LIVE?? AND HOW MUCH WILL YOU LET THEM GO FOR?? I'M LOCATED IN VIRGINIA BEACH AND MY STANG ISN'T PAINTED YET. IT'S A BIT OF A CHAMELEON RIGHT NOW WITH RED WHITE PRIMER AND LEAF IMPRINTS

I APPRECIATE YOU HELPING ME OUT DELL!!

Dell · February 17th, 2007, 01:00 PM

I'm in NY up near Canada....Don't know what the shipping would be?? I've never sold and shipped something that big.....It's all pretty light though, might not be to bad?. My kit came from California in a huge ass box wasn't bad price wise....Hmmmm,,How's $300 plus shipping?

..........I know the front clip is spanking new and retailed for $400...The rest is original..(1990) No rips er anything though (if i remember correctly?).....I can take pics if yer diggin that price?? So you can be sure..Don't wanna waste my time if yer just window shoppin though,hehe!

347tt · February 17th, 2007, 03:20 PM

LET ME TAKE A LOOK AROUND. I CAN GET A BRAND NEW FRONT AND REAR BUMPER FOR LESS THAN 300. BUT FINDING SIDE SKIRTS IS THE BIG PROBLEM FOR ME. I MAY JUST PURCHASE THE SIDE SKIRTS FROM YOU IF THAT SOUNDS FEASIBLE. NOT WINDOW SHOPPING, IM AS SERIOUS AS A 10 SEC. 1/4 MILE

HAHA. I WAS ALSO TALKING TO A GUY IN OKLAHOMA THAT WAS GOING TO SEND ME EVERYTHING FOR 200. I'LL DEFINITLEY KEEP IN TOUCH WITH YOU THOUGH!!

Dell · February 17th, 2007, 03:42 PM

Cool..Thanks for letting me know instead of being all anti

.....I might snap some pics anyway just to have for situations like this...I'll put a few in here for shits and giggles if yer curious?

347tt · February 17th, 2007, 05:29 PM

THANKS ALOT I APPRECIATE IT

FATTYTHELEGEND93 SVT · February 20th, 2007, 04:12 PM

NOT TO GET OFF TRACK BUT Dell did you go with the concept x kit like the one in your avatar ? ifso how much of a pain in the ass is it to hang . ive got one of those kits for a drag car that im building

Dell · February 20th, 2007, 05:45 PM

Originally Posted by FATTYTHELEGEND93 SVT

NOT TO GET OFF TRACK BUT Dell did you go with the concept x kit like the one in your avatar ? ifso how much of a pain in the ass is it to hang . ive got one of those kits for a drag car that im building

Hey Fatty

....I honestly have no idea what the name of that kit is....Yes the one in my Avy is the one i put on.....It was by no means a "bolt on" project...Woulda looked like hell....It was just a terrible mold, hardly a straight line on it.....I've been cutting parts out and remolding for days to make it fit right.

Plus side is when i'm done it'll fit like a glove, But it's been a lot of time and work to get there.

Here's a link to some pics of some of the steps i've done
http://www.artbydell.com/mustang.html

Dell · February 20th, 2007, 05:50 PM

Hey 347tt, i'll snap them pics soon like....Got a dam sinus infection so i havn't moved much

boof1027 · February 21st, 2007, 01:10 AM

If he decides not to buy it do you have the rubber door mouldings for sale? I need the ones that run along the middle of the door. That is the only thing I need for mine. If so shoot me an PM with a price shipped to 41234.

EDIT: After looking at the pics of dell's car he took his mouldings off. Do you still have those Dell? How much you want for them? :wink

Dell · February 21st, 2007, 10:19 AM

Originally Posted by boof1027

If he decides not to buy it do you have the rubber door mouldings for sale? I need the ones that run along the middle of the door. That is the only thing I need for mine. If so shoot me an PM with a price shipped to 41234.

EDIT: After looking at the pics of dell's car he took his mouldings off. Do you still have those Dell? How much you want for them? :wink

Don't remember if i saved them er not??...give me a whole couple i'll try to hunt em down.

Dell · February 21st, 2007, 02:36 PM

Sorry Boof looks like i tossed em.

347tt....here's some pics of the GT kit, no biggie if yer not diggin it, worth peeking at anyway i guess.
http://www.artbydell.com/stangparts.html

whiteboycustom · February 21st, 2007, 03:07 PM

to bad its not a lx front end i need one to convert my 83 over to a 87+

GTXRacing · February 21st, 2007, 06:06 PM

That's ok, Mrbodykit.com got em, it's the same ones too. They call it "Concept-X" kit and the 5.0 mustang mag is advertising it for 649.99/KIT...

I can see the shipping being another 400 bucks LOL <-- sorta...

Here's the direct site to them - http://www.mrbodykit.com/bodykits/87mustang.htm

February 15th, 2007, 04:28 PM	#1
347tt Regular Join Date: Sep 2006 Location: Virginia Beach Posts: 59	gt ground effects I've seen a few pictures that look like the bottom of the front gt bumper sits higher than the side skirts and the back bumper. Is this true for all gt kits or do my eyes decieve me I could have sworn that I;ve seen the bumpers and side skirts sitting flush all the way around.

February 15th, 2007, 06:22 PM	#3
wraitherlx Enthusiast 99 Cobra Join Date: Nov 2006 Location: Virginia Beach, VA Posts: 868	it probably looks that way b/c the front angles up a little __________________ Proud Member of the Mid-Atlantic Cobra Association

February 16th, 2007, 11:54 PM	#5
wraitherlx Enthusiast 99 Cobra Join Date: Nov 2006 Location: Virginia Beach, VA Posts: 868	there are body kits that are flush all the way around you just got match up front end, to side, to rear, if you get what i mean. Dont be like the ricers and mis-match. IMO though the fox GT's look fine with out anything other then hoods, wings, and maybe Cobra rear and sides. That is what im going for. As far as buying an aftermarket kit depending on where you get it from modification may be needed, especially fiberglass. On my 99 I got the Black widow cobra kit the front was urethane as well as the rear so they fit perfectly but the sides were fiberglass and they came in about 3 inches too short on each skirt so me and my buddy took it to his shop and cut it and added more glass for length. what kit were you thinking of going with? __________________ Proud Member of the Mid-Atlantic Cobra Association

February 20th, 2007, 04:12 PM	#13
FATTYTHELEGEND93 SVT Newbie Join Date: Feb 2007 Location: new jersey Posts: 13	NOT TO GET OFF TRACK BUT Dell did you go with the concept x kit like the one in your avatar ? ifso how much of a pain in the ass is it to hang . ive got one of those kits for a drag car that im building __________________ i have many new and used mustang parts available from 79-05 email me at FATTYCOMP@OPTONLINE.NET

February 21st, 2007, 03:07 PM	#19
whiteboycustom Enthusiast 83 coupe Join Date: Feb 2007 Location: vidor,texas Posts: 897	to bad its not a lx front end i need one to convert my 83 over to a 87+ __________________

Sponsored Links	Remove Advertisements
Forums at Modded Mustangs Advertisement

February 16th, 2007, 10:47 PM	#4
347tt Regular Join Date: Sep 2006 Location: Virginia Beach Posts: 59	THATS WHAT I THOUGHT BUT SOME OF THE PICTURE ANGLES MAKE IT LOOK LIKE IT'S WAY OFF AND THEN SOME LOOK LIKE THEY ARE FLUSH ALL AROUND. DO YOU THINK THAT IT'S POSSIBLE THAT AN AFTERMARKET PRODUCT COULD BE FLUSH ALL THE WAY AROUND, BECAUSE THAT'S WHAT I'M REALLY LOOKING FOR. IF NOT HOW MUCH WORK DO YOU THINK WOULD BE PUT IN ON MAKING IT THAT WAY??

February 17th, 2007, 11:51 AM	#6
347tt Regular Join Date: Sep 2006 Location: Virginia Beach Posts: 59	IM DEFINITELY GOING WITH THE GT KIT. ANYTHING ELSE IS TO GAWTY (SORRY ABOUT THE SPELLING) FOR ME. I LOVE THE GT KIT IT'S SIMPLE YET RACY. I JUST WANT IT FLUSH ALL THE WAY AROUND. IT DOESN'T LOOK LIKE IT WOULD BE TO HARD TO ADD MORE "GLASS TO THE ASS", THERE ARE PLENTY OF GOOD SPOTS TO CUT, IT'S JUST THE FRONT THAT BOTHERS ME. I THINK THAT I WOULD RATHER MOD THAN SPEND AND OUTRAGEOUS AMOUNT ANYWAY, IT MAKES IT MORE PERSONABLE TOO.

February 17th, 2007, 12:25 PM	#7
Dell Regular Join Date: Jan 2007 Location: Way Upstate NY Posts: 82	I'm sportin one of those Gawdy kits on my GT ...But i have all the stock GT kit collecting dust in my basement..Front clip, rear, and all the side pieces. I'd sell it all dirt cheap if ya want something to experiment with?...All in good shape cosmeticly other than paint.....I'd rather hook a fellow DIY Stang owner up than just throw it all over back....Just an idea Man.

February 17th, 2007, 12:43 PM	#8
347tt Regular Join Date: Sep 2006 Location: Virginia Beach Posts: 59	DIFFERENT STROKES FOR DIFFERENT FOLKS MY MAN. I WOULD LOVE TO TAKE THAT GT KIT OFF YOUR HANDS. WHERE DO YOU LIVE?? AND HOW MUCH WILL YOU LET THEM GO FOR?? I'M LOCATED IN VIRGINIA BEACH AND MY STANG ISN'T PAINTED YET. IT'S A BIT OF A CHAMELEON RIGHT NOW WITH RED WHITE PRIMER AND LEAF IMPRINTS I APPRECIATE YOU HELPING ME OUT DELL!!

February 17th, 2007, 01:00 PM	#9
Dell Regular Join Date: Jan 2007 Location: Way Upstate NY Posts: 82	I'm in NY up near Canada....Don't know what the shipping would be?? I've never sold and shipped something that big.....It's all pretty light though, might not be to bad?. My kit came from California in a huge ass box wasn't bad price wise....Hmmmm,,How's $300 plus shipping? ..........I know the front clip is spanking new and retailed for $400...The rest is original..(1990) No rips er anything though (if i remember correctly?).....I can take pics if yer diggin that price?? So you can be sure..Don't wanna waste my time if yer just window shoppin though,hehe!

February 17th, 2007, 03:20 PM	#10
347tt Regular Join Date: Sep 2006 Location: Virginia Beach Posts: 59	LET ME TAKE A LOOK AROUND. I CAN GET A BRAND NEW FRONT AND REAR BUMPER FOR LESS THAN 300. BUT FINDING SIDE SKIRTS IS THE BIG PROBLEM FOR ME. I MAY JUST PURCHASE THE SIDE SKIRTS FROM YOU IF THAT SOUNDS FEASIBLE. NOT WINDOW SHOPPING, IM AS SERIOUS AS A 10 SEC. 1/4 MILE HAHA. I WAS ALSO TALKING TO A GUY IN OKLAHOMA THAT WAS GOING TO SEND ME EVERYTHING FOR 200. I'LL DEFINITLEY KEEP IN TOUCH WITH YOU THOUGH!!

February 17th, 2007, 03:42 PM	#11
Dell Regular Join Date: Jan 2007 Location: Way Upstate NY Posts: 82	Cool..Thanks for letting me know instead of being all anti .....I might snap some pics anyway just to have for situations like this...I'll put a few in here for shits and giggles if yer curious?

February 17th, 2007, 05:29 PM	#12
347tt Regular Join Date: Sep 2006 Location: Virginia Beach Posts: 59	THANKS ALOT I APPRECIATE IT

February 20th, 2007, 05:50 PM	#15
Dell Regular Join Date: Jan 2007 Location: Way Upstate NY Posts: 82	Hey 347tt, i'll snap them pics soon like....Got a dam sinus infection so i havn't moved much

Threads Similar to: gt ground effects
Thread	Thread Starter	Forum	Replies	Last Post
car sound effects	BWAL09	Videos	4	March 20th, 2007 08:08 PM
ground effects	mustangmaniac	5.0 Mustangs	10	December 4th, 2006 07:52 PM
ground effects 88 mustang 5.0	mustangmaniac	5.0 Mustangs	6	November 25th, 2006 10:12 PM
GT ground effects brackets	ruger	5.0 Mustangs	0	August 4th, 2006 09:45 AM
bad ground?	bobvogel44	V6 Mustangs	4	April 5th, 2006 03:24 PM

February 21st, 2007, 01:10 AM	#16
boof1027 Newbie Join Date: Jan 2007 Posts: 12	If he decides not to buy it do you have the rubber door mouldings for sale? I need the ones that run along the middle of the door. That is the only thing I need for mine. If so shoot me an PM with a price shipped to 41234. EDIT: After looking at the pics of dell's car he took his mouldings off. Do you still have those Dell? How much you want for them? :wink

February 21st, 2007, 02:36 PM	#18
Dell Regular Join Date: Jan 2007 Location: Way Upstate NY Posts: 82	Sorry Boof looks like i tossed em. 347tt....here's some pics of the GT kit, no biggie if yer not diggin it, worth peeking at anyway i guess. http://www.artbydell.com/stangparts.html

February 21st, 2007, 06:06 PM	#20
GTXRacing Enthusiast Join Date: Apr 2006 Location: Greenville, Texas Posts: 734	That's ok, Mrbodykit.com got em, it's the same ones too. They call it "Concept-X" kit and the 5.0 mustang mag is advertising it for 649.99/KIT... I can see the shipping being another 400 bucks LOL <-- sorta... Here's the direct site to them - http://www.mrbodykit.com/bodykits/87mustang.htm __________________ THE BEAST IS FOR SALE!!! GTX RACING & PERFORMACE CLUB OF TEXAS Meets and greets, drag racing and good eats, you know you want it. GTX Racing Tony P. 214-257-3635 http://www.moddedmustangs.com/forums...vehicle&CID=43

All times are GMT -4. The time now is 03:23 PM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2009, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.

gt ground effects

gt ground effects

Re: gt ground effects