Exhaust clip thread, Post clips of your set up

JBIGBOOTSY · October 29th, 2009, 08:04 AM

Originally Posted by baine21225

Well aren't you fucking super duper

Don't hate on the futureistic sound of long tube headers. Even tho the design is older than the out dated shortys. And fuck h and x pipes. No crossover tube is a different sound, that's where the moneys at baby!

Smoked88GT · October 29th, 2009, 12:47 PM

Originally Posted by JBIGBOOTSY

I'll take a vid of my car with whistle tips. Woooooooooo woooooooooo!

Whistle tips is def! the way to go! Whistles go Wooooooooooo!!

baine21225 · October 29th, 2009, 04:41 PM

Originally Posted by JBIGBOOTSY

Don't hate on the futureistic sound of long tube headers. Even tho the design is older than the out dated shortys. And fuck h and x pipes. No crossover tube is a different sound, that's where the moneys at baby!

I don't even run an exhaust, heads straight to the atmosphere, sounds like george jetson build my engine

Smoked88GT · October 29th, 2009, 04:42 PM

Originally Posted by baine21225

MVI_0732.flv video by baine21225 - Photobucket

I'll try to get one with better sound quality tomorrow

Rebuilt 306
Stainless shorty headers
Offroad h pipe (exhaust is 2 1/2)
Flowmaster 40 or 50 series (they were on there when I got it)
F cam
Ported and polished E7's (I know)
FRPP 1.6 roller rockers
new springs, retainers, pushrods
Ford Racing 42 lb injectors
Pro M mass air
MSD dizzy cap/rotor
Taylor wires
255 lph Walbro fuel pump
Kirban adjustable fuel pressure regulator
BBK 75 mm throttle body
Vortec SC trim running about 10 lb of boost
Power pipe
Griffen 2 core aluminum radiator w/ 2 12in flex a lites
TFS track heat upper and lower
MSD digital 6al-2 w/ MSD hvc coil (blue)

I know I'm forgetting some stuff but thats most of it

Got another clip of it?

baine21225 · October 29th, 2009, 04:49 PM

Originally Posted by Smoked88GT

Got another clip of it?

I'll get one in a few min, watching the rest of the ultimate fighter

86_Notch · October 29th, 2009, 10:36 PM

351 , 1 3/4 shorties, flowmaster 3 inch exhaust

YouTube - Mustang

baine21225 · October 29th, 2009, 10:41 PM

I dig it

JBIGBOOTSY · October 29th, 2009, 11:02 PM

Originally Posted by 86_Notch

351 , 1 3/4 shorties, flowmaster 3 inch exhaust

YouTube - Mustang

I can hear into the future thru your long tubes!

But srsly, sounds good.

flattusmaximus78 · October 29th, 2009, 11:17 PM

You are a funny man, I'm not going to lie.

baine21225 · October 30th, 2009, 12:11 AM

Finally got it to upload, another failed attempt, sounds weird as shit bouncing off of that wall. believe it or not, the exhaust leak you can hear so much you can BARELY hear without the camera

YouTube - 5.0 Mustang Vortech

rasalibre · October 30th, 2009, 12:12 AM

Originally Posted by 92twotone

thanks

thanks i guess...lets see if u get this
"like funny how, whats funny about it...funny how? funny like im a clown, i amuse u, i make you fuckin laugh." haha

YOU REALLY ARE A FUNNY GUY!!!!!

flattusmaximus78 · October 30th, 2009, 10:17 AM

Baine, post a launch video... I want to but my camera is busted.

Smoked88GT · October 30th, 2009, 12:42 PM

+1 I agree with flattusmaximus78, I think you should get a launch.

I hear the exhaust leak. Car sounds nice though

baine21225 · October 30th, 2009, 01:11 PM

Originally Posted by flattusmaximus78

Baine, post a launch video... I want to but my camera is busted.

HAHAHAHAHAHA, winter tires are on......nice set of all season 215's i don't think i'll be doing any launching without a lot of smoke

Arctic Fox · October 31st, 2009, 06:52 AM

How's the interior sound on those with 3" at cruise? All of them seem to have chambered mufflers, but i've been thinking straight through. Flamestang and 86_Notch, what midpipe you got? And how hard would it be to get them over the rear axle in a lowered car? I think i'd like to have tailpipes, now mine is dumped and i don't like it.

btw 86, i love the rodlites on your foureye!

Originally Posted by baine21225

i don't think i'll be doing any launching without a lot of smoke

Nothing wrong with that.

flattusmaximus78 · October 31st, 2009, 07:22 AM

I tried launching on my mickeys in 90 degree weather, and they felt like 215s I'll tell you that much.\ lol.

86_Notch · October 31st, 2009, 10:17 AM

Thanks, I've got flowmasters new 3 inch kit. It comes with everything including the mid pipe. It was easy to fit over the rear because the pipes come apart apart ( if you look close you can see where in the pics ) so you shouldn't have any problems on your lowered car

This is what it looks like out of the box. ( it comes with all the clamps and hangers you need , i just didn't put them on for the pic )

wick22 · October 31st, 2009, 10:27 AM

Originally Posted by rasalibre

YOU REALLY ARE A FUNNY GUY!!!!!

from GOODFELLAS one of my all time favorite movies

flamestang · October 31st, 2009, 03:36 PM

Originally Posted by Arctic Fox

How's the interior sound on those with 3" at cruise? All of them seem to have chambered mufflers, but i've been thinking straight through. Flamestang and 86_Notch, what midpipe you got? And how hard would it be to get them over the rear axle in a lowered car? I think i'd like to have tailpipes, now mine is dumped and i don't like it.

btw 86, i love the rodlites on your foureye!

Nothing wrong with that.

straight 3" pipe for mids

sickfox · October 31st, 2009, 04:58 PM

Ford Motorports 1 5/8 equal length shorty headers, Flowmaster American Thunder exhaust dumped

YouTube - Mustang gt

October 29th, 2009, 10:41 PM	#47
baine21225 MM Fanatic Join Date: Jun 2007 Location: Baltimore, MD Posts: 4,338 iTrader: 1 reviews	I dig it __________________ "Whip out your dick you'll either get it sucked or get smacked..." "That's how Dad did it, that's how America does it... and it's worked out pretty well so far..."

October 29th, 2009, 11:17 PM	#49
flattusmaximus78 I Post Entirely Way Too Much 1993 5.ohhhh 12.97 @140mph Join Date: Apr 2006 Location: Gatorland Posts: 6,077 iTrader: 3 reviews	You are a funny man, I'm not going to lie. __________________ 02 Pewter z28, hoosiers/lid/exhaust/spray...125mph 1993 gt Sold, already missed --Moates Quarter horse $225-- --Cobra intake $150-- --tremec 3550 bell and shifter $1100--

October 30th, 2009, 10:17 AM	#52
flattusmaximus78 I Post Entirely Way Too Much 1993 5.ohhhh 12.97 @140mph Join Date: Apr 2006 Location: Gatorland Posts: 6,077 iTrader: 3 reviews	Baine, post a launch video... I want to but my camera is busted. __________________ 02 Pewter z28, hoosiers/lid/exhaust/spray...125mph 1993 gt Sold, already missed --Moates Quarter horse $225-- --Cobra intake $150-- --tremec 3550 bell and shifter $1100--

October 30th, 2009, 12:42 PM	#53
Smoked88GT Regular 1988 Mustang GT Join Date: Jan 2008 Location: Silverton, OR Posts: 62 iTrader: 0 reviews	+1 I agree with flattusmaximus78, I think you should get a launch. I hear the exhaust leak. Car sounds nice though __________________ 3.73s,Motorsports Cam(B303 orE303)BBK CAI,Edelbrock RPM intakes,AFR 165 Heads,Motorsports 1.6 R/R's,70mm Power TB/egr,76mm C&L MAF,24# injectors,Adj. FPR,255 lph Fuel pump.Spec Stage 1

October 31st, 2009, 07:22 AM	#56
flattusmaximus78 I Post Entirely Way Too Much 1993 5.ohhhh 12.97 @140mph Join Date: Apr 2006 Location: Gatorland Posts: 6,077 iTrader: 3 reviews	I tried launching on my mickeys in 90 degree weather, and they felt like 215s I'll tell you that much.\ lol. __________________ 02 Pewter z28, hoosiers/lid/exhaust/spray...125mph 1993 gt Sold, already missed --Moates Quarter horse $225-- --Cobra intake $150-- --tremec 3550 bell and shifter $1100--

October 31st, 2009, 10:17 AM	#57
86_Notch Hardcore Enthusiast 1986 lx notch 9.98 @ 135 Join Date: Mar 2007 Location: Delaware Posts: 1,421 iTrader: 0 reviews	Thanks, I've got flowmasters new 3 inch kit. It comes with everything including the mid pipe. It was easy to fit over the rear because the pipes come apart apart ( if you look close you can see where in the pics ) so you shouldn't have any problems on your lowered car This is what it looks like out of the box. ( it comes with all the clamps and hangers you need , i just didn't put them on for the pic ) __________________ " Spending money I don't have.... on things I don't need .... to impress people I don't know " . Last edited by 86_Notch; October 31st, 2009 at 10:20 AM.

Remove Advertisements Sponsored Links
Forums at Modded Mustangs Advertisement Advertisement

Threads Similar to: Exhaust clip thread, Post clips of your set up
Thread	Thread Starter	Forum	Replies	Last Post
OFFICIAL V6 EXHAUST THREAD with CLIPS	WLJohnson05	V6 Mustangs	102	January 5th, 2012 01:26 AM
Sorta an exhaust clip / drag clip	Ticket-Me-Yellow	V6 Mustangs	12	May 20th, 2009 05:48 PM
exhaust clips	stangfreak	The Clubhouse	10	September 6th, 2008 01:01 AM
Exhaust Clips	06RedfireGT	2005 - 2010	17	July 25th, 2007 04:41 PM
Post v6 exhaust sound clips...please :)	D-Brow	General Tech	5	May 31st, 2007 03:01 PM

All times are GMT -4. The time now is 08:23 PM.
Contact Us - Modded Mustangs - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.