Dome pistons with GT40P

stangage · November 14th, 2009, 01:22 PM

Just curious if dome pistons will work with GT40ps. isnt to much of a dome i am running a tf stage one cam nothing crazy. The heads as far as i know are untouched besides me putting an spring upgrade them i dont think theyve been milled.

fs308 · November 14th, 2009, 02:17 PM

my crystal ball says to check PTV clearance

stangage · November 14th, 2009, 03:09 PM

I plan to but id rather get some input before i drop the $$ on the pistons

e3sean · November 15th, 2009, 05:26 AM

i am building a 306 with some trw l2249 dome high compression pistons with p heads and a tfs 3 cam. i am not 100% sure if it will have the needed ptv clearence but ill let you know when i check it. it may be a few more weeks till i get to that point but i am only at the machine shop on saturdays to build the engine. we are also putting bigger valves in the heads as well.

November 14th, 2009, 01:22 PM	#1
stangage Regular Join Date: May 2008 Posts: 280 iTrader: 0 reviews	Dome pistons with GT40P Just curious if dome pistons will work with GT40ps. isnt to much of a dome i am running a tf stage one cam nothing crazy. The heads as far as i know are untouched besides me putting an spring upgrade them i dont think theyve been milled. __________________ "That old Ford sure fast on the draw out run the Chevys and out run the law"

November 14th, 2009, 02:17 PM	#2
fs308 Enthusiast Join Date: Dec 2007 Posts: 519 iTrader: 0 reviews	my crystal ball says to check PTV clearance __________________ 87 Notch Doing a lot with a little _____________________________ lightweight, stock motor, and 12's?

November 14th, 2009, 03:09 PM	#3
stangage Regular Join Date: May 2008 Posts: 280 iTrader: 0 reviews	I plan to but id rather get some input before i drop the $$ on the pistons __________________ "That old Ford sure fast on the draw out run the Chevys and out run the law"

November 15th, 2009, 05:26 AM	#4
e3sean I Post Entirely Way Too Much 1988 lx 9.68@142 Join Date: Nov 2007 Location: goldsboro NC Posts: 5,596 iTrader: 0 reviews	i am building a 306 with some trw l2249 dome high compression pistons with p heads and a tfs 3 cam. i am not 100% sure if it will have the needed ptv clearence but ill let you know when i check it. it may be a few more weeks till i get to that point but i am only at the machine shop on saturdays to build the engine. we are also putting bigger valves in the heads as well. __________________

Threads Similar to: Dome pistons with GT40P
Thread	Thread Starter	Forum	Replies	Last Post
Domed pistons w/ gt40p	stangage	5.0 Mustangs	4	August 13th, 2009 11:31 AM
dome light	Triple A	V6 Mustangs	3	December 17th, 2008 06:40 PM
Dome Lights	Ware	Audio/Video	3	June 25th, 2008 02:44 PM
Dome Light	Murderjetz	Audio/Video	2	June 21st, 2007 09:55 PM
Dome Light	97CobraSvt	96-98	2	October 19th, 2006 01:20 PM

Remove Advertisements Sponsored Links
Forums at Modded Mustangs Advertisement Advertisement

All times are GMT -4. The time now is 08:09 AM.
Contact Us - Modded Mustangs - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.