[firefly1241]

ok guys this is the thing i just got a 1000 dollars to spend and have been looking at a few mods i could through at my car it already has bbk shorties to a bbk off road h pipe to flow master mufflers. now i'm just looking to see what i should get to really bring the beast out in it. for suspension or chassis flex mods i was thinking a strut tower brace, i also had the idea of cold air 70mm TB 70mm MAF, but i don't know what else what are your guys's opinion

[NYHigH]

Throw some 4/10's in the rear

[firefly1241]

i thought 3.73 were the way to go?

[Tony_90fox]

Originally Posted by firefly1241 i thought 3.73 were the way to go?

Who told you that? There is no "way to go". It depends on your setup and what you want to do with the car. If there was a way to go, everybody would run the same gear. This is why you see everything from 2:73-4:56 or lower...

personally, throw some 4:10s in there.

[firefly1241]

well ive heard alot of 3.73 whats so good about the 4.10 do they give you a better top end or more torque????

i want a more through out the spectrum gear ratio so i have power all through out thats y i thought the 3.73 would be good also when buying and putting in gears do they come with the speedo gear ?

[Tony_90fox]

No they usually do not come with the speedo unless you find some special deal.

I am going with 4:30s if that tells you anything.

[Stangzilla]

If you have an automatic I would go with the 4.10's.. If it is a manual I would do the 3.73's

[NYHigH]

i heard arguments again and again with 3.73's and 4.10's.......i like 4.10's but i think people get the misconception of them not giving you enough top end when you put them in a car with a 3 speed tranny. I had them in with a t-5 and i can do about 60mph at 2000rpm...not to bad.

4.10's BABY WHOOOOOOOOOOO!!!!

[firefly1241]

i can do 60 right now at 1500rpm i have a manual so would that help with any other mods in the future ?

[NYHigH]

would what help? 4.10's...hell yea....they are a good Bang for the buck....you'll be ripping shit up all over when you get them.....just make sure you break them in after installation.......i forgot what it was.......something like drive for a few than let them cool for 30........and repeat a few times.......someone help but it should say in the directions.

[95opal]

gears
subframes
lower control arms
intake

Should be around your price range if you shop around.

[Stangzilla]

Originally Posted by NYHigH would what help? 4.10's...hell yea....they are a good Bang for the buck....you'll be ripping shit up all over when you get them.....just make sure you break them in after installation.......i forgot what it was.......something like drive for a few than let them cool for 30........and repeat a few times.......someone help but it should say in the directions.

as far as the break in goes its something like that...

[firefly1241]

what are all the companies i can get MAF from ??

[Tony_90fox]

I am personally getting this one. But not from this company.

http://www.performanceautosport.com/...id=SCT-BA-2400

[Stangzilla]

Buy a Pro-M mass air..

[firefly1241]

any other good places i'm looking around the 150-180 dollar mark

[Gen1sve]

eBay- My expirence Precesion turbo 74GTS - $510.00 - A smaller turbo may be even cheaper, better yet a pair of SVO or t-bird turbos, 42lb injectors, Mass air meter, air to air IC, fuel pump. Buy a case of beer for a buddy who can fab the rest of the turbo system. I know it's a stretch. I fab my own systems on the weekend so this is just my opinon on what to do with 1k. You can even run it as a hot car until you save for an intercooler and pick up a fmu instead of the Mass air meter and injectors. Turbos love stock gears too.

[Cali Muscle]

Gear's and Supercharger!!

[firefly1241]

where have you found a supercharger for around 1000 dollars

[GTXRacing]

Originally Posted by Cali Muscle Gear's and Supercharger!!

Super charger will cost him waaaaaaay more than a 1,000 bucks unless he gets one of those knock off BS electric supercharger kits of ebay WHICH I WOULD NEVER DO.