Flywheel?

gregkelley · March 14th, 2007, 05:33 PM

What flywheel should I go with with a 5 speed trans I looked at fidanza but a bit pricey? What other brands are good?

89StangGT · March 14th, 2007, 05:36 PM

what are your mods? if not alot just go with a stock replacement.

WilltheThrill · March 14th, 2007, 08:43 PM

I have a steel one from Centerforce, Ive never heard any bad things about that company

5-0stank · March 14th, 2007, 10:01 PM

autozone FTW!!!

95opal · March 14th, 2007, 10:51 PM

frpp $99 from summitt

89StangGT · March 14th, 2007, 11:01 PM

i put a autozone special in my car the other day, 60 bucks w00t.

Racinjason81 · March 14th, 2007, 11:32 PM

I think Ram sells their aluminum flywheel for the cheapest

WilltheThrill · March 15th, 2007, 01:34 AM

centerforce aluminum flywheel= $669 lol, yeah it was an eazy pick between the steel and alum. flywheel

YNOT · March 15th, 2007, 03:59 AM

Originally Posted by 89StangGT

what are your mods? if not alot just go with a stock replacement.

how much is a stock one? where do you get them?

Racinjason81 · March 15th, 2007, 02:48 PM

they are around 100 buck for a stock one you could get one from summit
FYI 81&up 5.0s are 50oz balance

YNOT · March 15th, 2007, 02:57 PM

how many teeth?

89StangGT · March 15th, 2007, 05:20 PM

i got my stock one for 60 bucks at autozone, i think their like 157 tooth

WilltheThrill · March 15th, 2007, 10:01 PM

spend a lil bit more money and get a heavy duty one, it would be worth it IMO

Stangzilla · March 15th, 2007, 10:21 PM

Originally Posted by 89StangGT

i got my stock one for 60 bucks at autozone, i think their like 157 tooth

AutoZone Parts are crap....!!! Dont be surpised if that thing shatters into a 1000 pieces...

Stangzilla · March 15th, 2007, 10:22 PM

Originally Posted by 89StangGT

i got my stock one for 60 bucks at autozone, i think their like 157 tooth

AutoZone parts = BREAK & TOW !!

Got that from your sig.. so you know all about it...

5-0stank · March 16th, 2007, 09:03 AM

autozone sells a luk flywheel...which is decent for a o.e. part imo.

my friend runs an autozone flywheel with a spec stage 3 on his ~400rwhp camaro.

StangAddiction · March 16th, 2007, 09:06 AM

the cast iron flywheel should be fine if its a street car and you dont beat the crap out of it daily.

Racinjason81 · March 16th, 2007, 07:03 PM

i dont think, i know its definitely a 157t flywheel

Stangzilla · March 16th, 2007, 11:15 PM

Originally Posted by WilltheThrill

spend a lil bit more money and get a heavy duty one, it would be worth it IMO

Hey Will how did you put that pic of you and your car there??

Stangzilla · March 16th, 2007, 11:17 PM

Originally Posted by StangAddiction

the cast iron flywheel should be fine if its a street car and you dont beat the crap out of it daily.

You find me a Mustang owner that does not beat his car at least a little on a daily basis and I will call him a fag..

LOL.. j\k Not!!!

March 14th, 2007, 05:33 PM	#1
gregkelley Regular Join Date: Feb 2007 Posts: 52	Flywheel? What flywheel should I go with with a 5 speed trans I looked at fidanza but a bit pricey? What other brands are good?

March 14th, 2007, 05:36 PM	#2
89StangGT Moderator Join Date: Aug 2006 Location: Toledo Ohio Posts: 787	what are your mods? if not alot just go with a stock replacement. __________________ 1991 Mustang LX- Project Ass Whipper BRING SLICKS..NOT EXCUSES

March 14th, 2007, 08:43 PM	#3
WilltheThrill MM Fanatic 03 cobra 13.2 @ 108 at 2710 ft. elevation Join Date: Dec 2006 Location: CA Posts: 3,788	I have a steel one from Centerforce, Ive never heard any bad things about that company __________________ my friends call it the "screamin' banana" and dont forget......smoke tires, not drugs. snaaarf snaaaarf http://www.youtube.com/watch?v=IO3ZbQiGNkk

March 14th, 2007, 10:01 PM	#4
5-0stank Enthusiast Join Date: Sep 2006 Location: emmaus, pa Posts: 508	autozone FTW!!! __________________ 1995 GT 5-Speed: 14.4 @ 96.1mph

March 14th, 2007, 10:51 PM	#5
95opal Enthusiast 95 opalfrost gt Join Date: Nov 2006 Location: Connecticut Posts: 877	frpp $99 from summitt __________________

March 14th, 2007, 11:01 PM	#6
89StangGT Moderator Join Date: Aug 2006 Location: Toledo Ohio Posts: 787	i put a autozone special in my car the other day, 60 bucks w00t. __________________ 1991 Mustang LX- Project Ass Whipper BRING SLICKS..NOT EXCUSES

March 14th, 2007, 11:32 PM	#7
Racinjason81 Hardcore Enthusiast Join Date: Feb 2007 Location: New jersey Posts: 1,198	I think Ram sells their aluminum flywheel for the cheapest __________________ Speed kills drive an import and live forever. 1991 LX 5.0 H/B 1990 T-BIRD SC

March 15th, 2007, 01:34 AM	#8
WilltheThrill MM Fanatic 03 cobra 13.2 @ 108 at 2710 ft. elevation Join Date: Dec 2006 Location: CA Posts: 3,788	centerforce aluminum flywheel= $669 lol, yeah it was an eazy pick between the steel and alum. flywheel __________________ my friends call it the "screamin' banana" and dont forget......smoke tires, not drugs. snaaarf snaaaarf http://www.youtube.com/watch?v=IO3ZbQiGNkk

March 15th, 2007, 02:48 PM	#10
Racinjason81 Hardcore Enthusiast Join Date: Feb 2007 Location: New jersey Posts: 1,198	they are around 100 buck for a stock one you could get one from summit FYI 81&up 5.0s are 50oz balance __________________ Speed kills drive an import and live forever. 1991 LX 5.0 H/B 1990 T-BIRD SC

March 15th, 2007, 02:57 PM	#11
YNOT Regular 1989 GT Hatch Join Date: Mar 2007 Posts: 223	how many teeth?

March 15th, 2007, 05:20 PM	#12
89StangGT Moderator Join Date: Aug 2006 Location: Toledo Ohio Posts: 787	i got my stock one for 60 bucks at autozone, i think their like 157 tooth __________________ 1991 Mustang LX- Project Ass Whipper BRING SLICKS..NOT EXCUSES

March 15th, 2007, 10:01 PM	#13
WilltheThrill MM Fanatic 03 cobra 13.2 @ 108 at 2710 ft. elevation Join Date: Dec 2006 Location: CA Posts: 3,788	spend a lil bit more money and get a heavy duty one, it would be worth it IMO __________________ my friends call it the "screamin' banana" and dont forget......smoke tires, not drugs. snaaarf snaaaarf http://www.youtube.com/watch?v=IO3ZbQiGNkk

March 16th, 2007, 09:03 AM	#16
5-0stank Enthusiast Join Date: Sep 2006 Location: emmaus, pa Posts: 508	autozone sells a luk flywheel...which is decent for a o.e. part imo. my friend runs an autozone flywheel with a spec stage 3 on his ~400rwhp camaro. __________________ 1995 GT 5-Speed: 14.4 @ 96.1mph

March 16th, 2007, 09:06 AM	#17
StangAddiction Enthusiast 2000 Mustang GT Join Date: Jan 2007 Location: Virginia Beach Posts: 869	the cast iron flywheel should be fine if its a street car and you dont beat the crap out of it daily.

March 16th, 2007, 07:03 PM	#18
Racinjason81 Hardcore Enthusiast Join Date: Feb 2007 Location: New jersey Posts: 1,198	i dont think, i know its definitely a 157t flywheel __________________ Speed kills drive an import and live forever. 1991 LX 5.0 H/B 1990 T-BIRD SC

All times are GMT -4. The time now is 06:05 AM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.