Start issues Help please

1989Gt. · October 27th, 2010, 06:29 PM

Yeah hes a fabricator is i think we can do it. ill tell you what happens later and how it goes were going out to do it right now...

95StangMX · October 28th, 2010, 11:15 AM

Don't get crazy with me ese,

I was just trying to say that its not easy. Not doubting your dads skill, how the hell would I know, he could be one of the top machinist in the world... Just trying to let you know, cause some people think you can just weld it. Hope it works out for you, or guess I should say, how did it work out? You take pics?

1989Gt. · October 28th, 2010, 04:07 PM

Well day one went good. Im going to have to get the bottom of the manifold machined though. We ran out of filler rod so i gotta buy some more check this out, 1 pound of the stuff im using is 39 dollars.... Wtf for aluminum rod filler 6707 or something like that. My dad is making it look nice this is his first time doing aluminum but its coming out good there is one more spot we need to do. I have been taking pics so ill upload them when were all done hopefully this all works out if not, im gonna buy a new manifold my dad just wanted to try it he fascinated as all hell

October 28th, 2010, 11:15 AM	#22
95StangMX MM Fanatic 95 Mustang GT depends how many people are pushing Join Date: Oct 2007 Location: Playa del Carmen, Mexico Posts: 3,243 iTrader: 0 reviews	Don't get crazy with me ese, I was just trying to say that its not easy. Not doubting your dads skill, how the hell would I know, he could be one of the top machinist in the world... Just trying to let you know, cause some people think you can just weld it. Hope it works out for you, or guess I should say, how did it work out? You take pics? __________________ People should think about boarding up their glass house before starting a rock fight!

Threads Similar to: Start issues Help please
Thread	Thread Starter	Forum	Replies	Last Post
91 5.0 hot start issues	dwinter	5.0 Mustangs	8	September 30th, 2009 03:27 PM
Car is hard to start and other issues after oil change...	matt0114	5.0 Mustangs	23	June 9th, 2009 09:52 AM
Cold start issues	347Strokr	5.0 Mustangs	1	March 21st, 2009 08:29 PM
Start-up Issues - high revving	Merenth	2005 - 2010	3	December 21st, 2008 02:56 PM
No Start Issues	jrh_1980	5.0 Mustangs	2	November 18th, 2008 11:26 AM

October 27th, 2010, 06:29 PM	#21
1989Gt. Hardcore Enthusiast 1989 Mustang GT Join Date: Apr 2008 Posts: 2,799 iTrader: 0 reviews	Yeah hes a fabricator is i think we can do it. ill tell you what happens later and how it goes were going out to do it right now...

October 28th, 2010, 04:07 PM	#23
1989Gt. Hardcore Enthusiast 1989 Mustang GT Join Date: Apr 2008 Posts: 2,799 iTrader: 0 reviews	Well day one went good. Im going to have to get the bottom of the manifold machined though. We ran out of filler rod so i gotta buy some more check this out, 1 pound of the stuff im using is 39 dollars.... Wtf for aluminum rod filler 6707 or something like that. My dad is making it look nice this is his first time doing aluminum but its coming out good there is one more spot we need to do. I have been taking pics so ill upload them when were all done hopefully this all works out if not, im gonna buy a new manifold my dad just wanted to try it he fascinated as all hell

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

All times are GMT -4. The time now is 12:38 AM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.