Anyone Want a '88 Camaro Iroc-Z w/350ci....trade or $1500

Speedstang302 · April 15th, 2007, 06:50 PM

for sale is a '88 Iroc-Z w/350ci- flowmasters, rebuilt heads, new intake, carb, hedmen headers...will trade for a 79-93 mustang...preferably a 87-93 GT or LX 5.0 w/ 5-spd...needs to be running or damn close to it..and bodys can vary!!!!

chadjones99 · April 15th, 2007, 08:14 PM

this is the modded mustang site , not the get rid of your crapie oil leaking chevy site !

just kidding.. could not help my self, good luck

Speedstang302 · April 15th, 2007, 08:45 PM

yeah deffinatly not an crappy old chevy..its actually wicked clean and rlly fast...and i've been plenty of mustangs round here...302's, 306's and a 347...the only reason im getting rid of it...iz cuz were getting a new suburban...so no room in the driveway...otherwise i wouldnt be listing it for dumbasses like you to be ragging on it...i drive and love mustangs...but camaros are the only exceptions when it comes to chevy!!!!!

angermgt · April 15th, 2007, 09:48 PM

wicked and fast ? where are the pics!

Speedstang302 · April 15th, 2007, 10:20 PM

well its a mustang page...so that why i havent posted pics...but here are a couple...well not wicked clean...only one blemish on paint and body is small paint chips on front facia...its a 350ci, ex- corvette motor, w/ flat tappet camshaft, hedmen headers, edelbrock performer rpm intake, holley 700cfm dual feed carb, completely rebuild GM heads and distributor, 9.2mm taylor wire, eibach sportline shocks, struts, springs, rebuilt TH700R4 transmission w/new pan, shift kit, stall converter. aluminum driveshaft, 3:73's, flowmasters...loaded and mostly complete interior...its fast..well in my opinion and most of my passengers opinion..i've beaten a couple mustangs (302,306,347) and also a chevelle w/396...so its quick of the line too...idk not big on chevys but the one it takes the exception!!!!

Stangzilla · April 15th, 2007, 10:32 PM

Question, why would you put a motor together without painting it?..

Speedstang302 · April 15th, 2007, 10:49 PM

painting the block or the body??if the block cuz i got like all parts and started doing the work..and really realize im a ford guy, why do i have a chevy, i mean the cars OK, and there wasnt any mustangs laying around when i was looking..and i got impatient and go this camaro...but when i realized that i just put it together and then listed it...the next person can deal wit that shit!!

Stangzilla · April 15th, 2007, 11:02 PM

I am talkin about the motor.. But I would have still painted the motor.. Anyway good luck in trying to get rid of it....

Speedstang302 · April 15th, 2007, 11:08 PM

well im gunna need your luck...for some reason i cant get rid of this darn car..i need a mustang...i have mine with a 306 in kit..and i love it...but im building up a 460 right now and i have some super cobra jet aluminum heads on the way for it too...i just need a donor car for it..thats why this camaro's gotta go..i have the street car w/ the 306 and i wat something i can bring to the strip...the 460!!!!

Stangzilla · April 15th, 2007, 11:36 PM

Hey I have an idea if you cant get rid of the Camaro why dont try something different. Some people put Chevy motors in Mustangs why dont you put that 460 in the Camaro along with a 9 inch rear and and a Tremec trans... Now that would be cool.... Then you will have time to find a Mustang pull the running gear out of the Camaro then sell the rolling chassis of junk the fucker.. Just a thought...

Speedstang302 · April 15th, 2007, 11:45 PM

yeah...i could do it but thats alot of time money and work...and that means alot of custom stuff..like tearing the camaro's floor pans apart to fit the new tremec...but i dont think a tremec or almost any standard tranny will work behind a nasty big block..cuz this 460's going to either 514 or 572...thats alot of power even for a tremec on steroids

chadjones99 · April 16th, 2007, 10:18 AM

I thought you said no room was the only reason you were getting rid of it ? remember the chev suburban? now you want to take in a 5.0 in its place. so which is it, no room or what ? sounds like your tiring to unload your crappie oil leaking/burning Chevy on a ford mustang site. good luck Dum Dum !

Speedstang302 · April 16th, 2007, 11:35 AM

no i do need the room for a suburban...but i can keep a car in the yard for like a week or two...so i'll take wat i need or want and then dump it...

TurboLX · April 16th, 2007, 11:50 AM

Originally Posted by Speedstang302

no i do need the room for a suburban...but i can keep a car in the yard for like a week or two...so i'll take wat i need or want and then dump it...

Suburban?? what are you a full blown Chevy guy??

GTXRacing · April 16th, 2007, 02:12 PM

pics of the iroc z and pics of the engine CLEAR PICTURES PLEASE!

ckthecerealkiller · April 16th, 2007, 02:25 PM

Wow you guys are being assholes.... Sounds like a pretty quick chevy, I'd consider it but for one my wife would kill me for getting a chevy and I am not much for the Irocs.

What kind of numbers does the motor make anyway? I'll let a few people know if you live nearby. Where are you at???

Speedstang302 · April 16th, 2007, 08:06 PM

im located in mass...and im not getting the suburban...family is...and i've owned a god damn ford SUV before and they suck...i absolutly hated my explorer and my expedition....and i thing the motor has like 265hp stock and will the mods now maybe close to 300...i dont rlly know for sure...yeah..and i rlly need to get rid of it...well i dont know if its an iroc anyways maybe a Z28, it has Z28 emblems all over it but no iroc stuff on it..its an 88 and there were no Z28's in 88 only coupes and iroc-zs...and i am rlly willing to negociate...i kno $1500 is still too low...but cash talks

2007calispecial · April 16th, 2007, 08:36 PM

SHOOT ME AN EMIAL Voteformrtoodles@yahoo.com ill buy it!

nateo · April 17th, 2007, 08:39 AM

sell the motor and do a tax write off on the body donate it!!!!!!!!!!!

ryanw · May 7th, 2007, 10:44 PM

I hope you were able to get rid of your camaro, i had a 68 camaro at one time , i wish i still had it, it just needed to much body work. theres nothing wrong with camaros, there nice looking cars just like mustangs. one of my friends is building a 73 camaro. i have a 91 mustang that im starting to fix back up after running the car in to the ground, so good luck with you hunt for a stang.

April 15th, 2007, 06:50 PM	#1
Speedstang302 MM Fanatic 1989 Mustang LX 5.0 12.86@ 111mph Join Date: Apr 2007 Location: Massachusetss Posts: 4,533	Anyone Want a '88 Camaro Iroc-Z w/350ci....trade or $1500 for sale is a '88 Iroc-Z w/350ci- flowmasters, rebuilt heads, new intake, carb, hedmen headers...will trade for a 79-93 mustang...preferably a 87-93 GT or LX 5.0 w/ 5-spd...needs to be running or damn close to it..and bodys can vary!!!!

April 15th, 2007, 08:14 PM	#2
chadjones99 Regular Join Date: Aug 2006 Location: Tonopah,az Posts: 86	this is the modded mustang site , not the get rid of your crapie oil leaking chevy site ! just kidding.. could not help my self, good luck __________________ 1986 stang ,Edelbrook intake, aluminum heads, E303 cam ,70 MM throttle body ,24lb injectors ,373 gears , 10:1 pistons set up,no cats , flowmaster mufflers , short shifter , 255 fuel pump , smog pump delete , A/C delete , Aluminum Radiator , MAF convertion

April 15th, 2007, 09:48 PM	#4
angermgt Regular Join Date: Nov 2006 Location: new jersey Posts: 131	wicked and fast ? where are the pics! __________________ http://i11.tinypic.com/485udec.jpg 473whp/432wtq 13lbs. boost

April 15th, 2007, 10:20 PM	#5
Speedstang302 MM Fanatic 1989 Mustang LX 5.0 12.86@ 111mph Join Date: Apr 2007 Location: Massachusetss Posts: 4,533	well its a mustang page...so that why i havent posted pics...but here are a couple...well not wicked clean...only one blemish on paint and body is small paint chips on front facia...its a 350ci, ex- corvette motor, w/ flat tappet camshaft, hedmen headers, edelbrock performer rpm intake, holley 700cfm dual feed carb, completely rebuild GM heads and distributor, 9.2mm taylor wire, eibach sportline shocks, struts, springs, rebuilt TH700R4 transmission w/new pan, shift kit, stall converter. aluminum driveshaft, 3:73's, flowmasters...loaded and mostly complete interior...its fast..well in my opinion and most of my passengers opinion..i've beaten a couple mustangs (302,306,347) and also a chevelle w/396...so its quick of the line too...idk not big on chevys but the one it takes the exception!!!! Last edited by Speedstang302 : December 10th, 2007 at 04:18 PM.

April 15th, 2007, 10:32 PM	#6
Stangzilla Hardcore Enthusiast Join Date: Aug 2006 Location: On my way to Baines's house!! Posts: 2,992	Question, why would you put a motor together without painting it?.. __________________ Rotating The Earth 1320 Feet At A Time!! The very existence of flamethrowers proves that sometime, somewhere, someone said to themselves, “You know, I want to set those people over there on fire, but I’m just not close enough to get the job done.”

April 15th, 2007, 08:45 PM	#3
Speedstang302 MM Fanatic 1989 Mustang LX 5.0 12.86@ 111mph Join Date: Apr 2007 Location: Massachusetss Posts: 4,533	yeah deffinatly not an crappy old chevy..its actually wicked clean and rlly fast...and i've been plenty of mustangs round here...302's, 306's and a 347...the only reason im getting rid of it...iz cuz were getting a new suburban...so no room in the driveway...otherwise i wouldnt be listing it for dumbasses like you to be ragging on it...i drive and love mustangs...but camaros are the only exceptions when it comes to chevy!!!!!

April 15th, 2007, 10:49 PM	#7
Speedstang302 MM Fanatic 1989 Mustang LX 5.0 12.86@ 111mph Join Date: Apr 2007 Location: Massachusetss Posts: 4,533	painting the block or the body??if the block cuz i got like all parts and started doing the work..and really realize im a ford guy, why do i have a chevy, i mean the cars OK, and there wasnt any mustangs laying around when i was looking..and i got impatient and go this camaro...but when i realized that i just put it together and then listed it...the next person can deal wit that shit!!

April 15th, 2007, 11:02 PM	#8
Stangzilla Hardcore Enthusiast Join Date: Aug 2006 Location: On my way to Baines's house!! Posts: 2,992	I am talkin about the motor.. But I would have still painted the motor.. Anyway good luck in trying to get rid of it.... __________________ Rotating The Earth 1320 Feet At A Time!! The very existence of flamethrowers proves that sometime, somewhere, someone said to themselves, “You know, I want to set those people over there on fire, but I’m just not close enough to get the job done.”

April 15th, 2007, 11:08 PM	#9
Speedstang302 MM Fanatic 1989 Mustang LX 5.0 12.86@ 111mph Join Date: Apr 2007 Location: Massachusetss Posts: 4,533	well im gunna need your luck...for some reason i cant get rid of this darn car..i need a mustang...i have mine with a 306 in kit..and i love it...but im building up a 460 right now and i have some super cobra jet aluminum heads on the way for it too...i just need a donor car for it..thats why this camaro's gotta go..i have the street car w/ the 306 and i wat something i can bring to the strip...the 460!!!!

April 15th, 2007, 11:36 PM	#10
Stangzilla Hardcore Enthusiast Join Date: Aug 2006 Location: On my way to Baines's house!! Posts: 2,992	Hey I have an idea if you cant get rid of the Camaro why dont try something different. Some people put Chevy motors in Mustangs why dont you put that 460 in the Camaro along with a 9 inch rear and and a Tremec trans... Now that would be cool.... Then you will have time to find a Mustang pull the running gear out of the Camaro then sell the rolling chassis of junk the fucker.. Just a thought... __________________ Rotating The Earth 1320 Feet At A Time!! The very existence of flamethrowers proves that sometime, somewhere, someone said to themselves, “You know, I want to set those people over there on fire, but I’m just not close enough to get the job done.”

April 15th, 2007, 11:45 PM	#11
Speedstang302 MM Fanatic 1989 Mustang LX 5.0 12.86@ 111mph Join Date: Apr 2007 Location: Massachusetss Posts: 4,533	yeah...i could do it but thats alot of time money and work...and that means alot of custom stuff..like tearing the camaro's floor pans apart to fit the new tremec...but i dont think a tremec or almost any standard tranny will work behind a nasty big block..cuz this 460's going to either 514 or 572...thats alot of power even for a tremec on steroids

April 16th, 2007, 10:18 AM	#12
chadjones99 Regular Join Date: Aug 2006 Location: Tonopah,az Posts: 86	some people are not to smart I thought you said no room was the only reason you were getting rid of it ? remember the chev suburban? now you want to take in a 5.0 in its place. so which is it, no room or what ? sounds like your tiring to unload your crappie oil leaking/burning Chevy on a ford mustang site. good luck Dum Dum ! __________________ 1986 stang ,Edelbrook intake, aluminum heads, E303 cam ,70 MM throttle body ,24lb injectors ,373 gears , 10:1 pistons set up,no cats , flowmaster mufflers , short shifter , 255 fuel pump , smog pump delete , A/C delete , Aluminum Radiator , MAF convertion

April 16th, 2007, 11:35 AM	#13
Speedstang302 MM Fanatic 1989 Mustang LX 5.0 12.86@ 111mph Join Date: Apr 2007 Location: Massachusetss Posts: 4,533	no i do need the room for a suburban...but i can keep a car in the yard for like a week or two...so i'll take wat i need or want and then dump it...

April 16th, 2007, 02:12 PM	#15
GTXRacing Enthusiast Join Date: Apr 2006 Location: Greenville, Texas Posts: 735	pics of the iroc z and pics of the engine CLEAR PICTURES PLEASE! __________________ THE BEAST IS FOR SALE!!! GTX RACING & PERFORMACE CLUB OF TEXAS Meets and greets, drag racing and good eats, you know you want it. GTX Racing Tony P. 214-257-3635 http://www.moddedmustangs.com/forums...vehicle&CID=43

April 16th, 2007, 02:25 PM	#16
ckthecerealkiller Enthusiast Join Date: Oct 2005 Location: Greeley Colorado with high rate of living an low wages baby! Posts: 935	Wow you guys are being assholes.... Sounds like a pretty quick chevy, I'd consider it but for one my wife would kill me for getting a chevy and I am not much for the Irocs. What kind of numbers does the motor make anyway? I'll let a few people know if you live nearby. Where are you at???

Threads Similar to: Anyone Want a '88 Camaro Iroc-Z w/350ci....trade or $1500
Thread	Thread Starter	Forum	Replies	Last Post
1986 iroc z28	brianstang	All Other Vehicles	3	September 20th, 2007 07:26 PM
1986 iroc z28	brianstang	For Sale	4	August 13th, 2007 09:17 PM
Iroc z	Mustangfan99	V6 Mustangs	110	July 23rd, 2007 01:46 AM
1988 Camaro Iroc-Z 350ci FOR SALE OR TRADE for Mustang	Speedstang302	For Sale	3	April 16th, 2007 02:01 AM
06 Ram 1500	mcollins	All Other Vehicles	3	September 19th, 2006 10:00 AM

All times are GMT -4. The time now is 09:22 AM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.

April 16th, 2007, 08:06 PM	#17
Speedstang302 MM Fanatic 1989 Mustang LX 5.0 12.86@ 111mph Join Date: Apr 2007 Location: Massachusetss Posts: 4,533	im located in mass...and im not getting the suburban...family is...and i've owned a god damn ford SUV before and they suck...i absolutly hated my explorer and my expedition....and i thing the motor has like 265hp stock and will the mods now maybe close to 300...i dont rlly know for sure...yeah..and i rlly need to get rid of it...well i dont know if its an iroc anyways maybe a Z28, it has Z28 emblems all over it but no iroc stuff on it..its an 88 and there were no Z28's in 88 only coupes and iroc-zs...and i am rlly willing to negociate...i kno $1500 is still too low...but cash talks

April 17th, 2007, 08:39 AM	#19
nateo Newbie Join Date: Mar 2007 Posts: 27	sell the motor and do a tax write off on the body donate it!!!!!!!!!!!

May 7th, 2007, 10:44 PM	#20
ryanw Newbie Join Date: May 2007 Posts: 13	I hope you were able to get rid of your camaro, i had a 68 camaro at one time , i wish i still had it, it just needed to much body work. theres nothing wrong with camaros, there nice looking cars just like mustangs. one of my friends is building a 73 camaro. i have a 91 mustang that im starting to fix back up after running the car in to the ground, so good luck with you hunt for a stang.

Anyone Want a '88 Camaro Iroc-Z w/350ci....trade or $1500

Anyone Want a '88 Camaro Iroc-Z w/350ci....trade or $1500

some people are not to smart