whats the best blower cam

5.0 lover · April 23rd, 2011, 07:46 PM

i have a stock 302 block with trick flow 185 heads. i have a supercharger thats got about 5 lbs of boost.i have b303 now but i want something a little better. i know probly you will all say custom cam but i was just wondering what is good blower cam example e303,tfs stage 2

i want a good street setup

5.0 lover · April 24th, 2011, 08:58 AM

any one?

flattusmaximus78 · April 24th, 2011, 09:01 AM

If your ganna get a crappy ots grin like ford go f303 cam. There are tons of good anderson grinds, but I have no experience with them. If you are on 5 psi it's way less time consuming to go 8 rib on the crank and blower pulley and get a smaller pulley for 10psi.

b-on-b 5.0 · April 24th, 2011, 11:07 AM

i have get the anderson b-451 cam or b-51 cam i run the b-451 with afr 185's a systemax and a 347 on 10.5 psi maybe 11psi i make 616.9 rwhp and 576 rwtq cam builds great top end and falls off about 6,400 rpms lopes reli good and is streetable

5.0 lover · April 25th, 2011, 05:43 PM

never heard of anderson cams

fogged306 · April 25th, 2011, 05:48 PM

That must be why you're on a forum asking questions then, right?

Anderson Ford Motorsport

5.0 lover · April 26th, 2011, 09:00 AM

ya are there any more good blower cams

93hatch · April 26th, 2011, 09:08 AM

zero overlap to hold dat der boost in .700 lift

April 23rd, 2011, 07:46 PM	#1
5.0 lover Regular Join Date: Aug 2010 Posts: 113 iTrader: 0 reviews	whats the best blower cam i have a stock 302 block with trick flow 185 heads. i have a supercharger thats got about 5 lbs of boost.i have b303 now but i want something a little better. i know probly you will all say custom cam but i was just wondering what is good blower cam example e303,tfs stage 2 i want a good street setup

April 24th, 2011, 09:01 AM	#3
flattusmaximus78 I Post Entirely Way Too Much 1993 5.ohhhh 12.97 @140mph Join Date: Apr 2006 Location: Gatorland Posts: 6,122 iTrader: 3 reviews	If your ganna get a crappy ots grin like ford go f303 cam. There are tons of good anderson grinds, but I have no experience with them. If you are on 5 psi it's way less time consuming to go 8 rib on the crank and blower pulley and get a smaller pulley for 10psi. __________________ 02 Pewter z28, hoosiers/lid/exhaust/spray...125mph 1993 gt Sold, already missed --Moates Quarter horse $225-- --Cobra intake $150-- --tremec 3550 bell and shifter $1100--

April 24th, 2011, 11:07 AM	#4
b-on-b 5.0 Regular 1993 Mustang 5.0 LX 11.45@122.34 Join Date: Jul 2008 Location: Lakewood, CO Posts: 344 iTrader: 0 reviews	i have get the anderson b-451 cam or b-51 cam i run the b-451 with afr 185's a systemax and a 347 on 10.5 psi maybe 11psi i make 616.9 rwhp and 576 rwtq cam builds great top end and falls off about 6,400 rpms lopes reli good and is streetable __________________ Old setup 93 cobra motor, supporting mods, 11.5psi out of V3 S-Trim made 422.5rwhp and 450 rwtq ran 12's at 5800 ft above sealevel new setup 347 on 11psi made 616.9rwhp and 576.0rwtq

April 26th, 2011, 09:08 AM	#8
93hatch Banned 1992 Lx 11.39@119.24 Join Date: Jan 2008 Location: Az Posts: 11,644 iTrader: 0 reviews	zero overlap to hold dat der boost in .700 lift __________________ [QUOTE=93mustank;2577445]We speed tested my right arm for quickness in shifts... So he could design the cam for proper shift recovery.[/QUOTE]

Threads Similar to: whats the best blower cam
Thread	Thread Starter	Forum	Replies	Last Post
whats needed for this blower? worth it?	kyle2002stang!	99-04	5	September 14th, 2010 05:42 PM
clutches.whats good whats junk?	i8achevy4u	5.0 Mustangs	9	October 21st, 2009 10:38 PM
if a roush tvs blower fits a 4.6L then can a GT 500 blower be retrofitted?	navyman8903	2005 - 2010	64	August 29th, 2009 04:23 PM
Whats a Blower??	yourmom6990	96-98	5	January 9th, 2007 01:03 AM

April 24th, 2011, 08:58 AM	#2
5.0 lover Regular Join Date: Aug 2010 Posts: 113 iTrader: 0 reviews	any one?

April 25th, 2011, 05:43 PM	#5
5.0 lover Regular Join Date: Aug 2010 Posts: 113 iTrader: 0 reviews	never heard of anderson cams

April 25th, 2011, 05:48 PM	#6
fogged306 MM Fanatic 89 GT Join Date: Apr 2007 Location: NY Posts: 4,875 iTrader: 2 reviews	That must be why you're on a forum asking questions then, right? Anderson Ford Motorsport

April 26th, 2011, 09:00 AM	#7
5.0 lover Regular Join Date: Aug 2010 Posts: 113 iTrader: 0 reviews	ya are there any more good blower cams

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

All times are GMT -4. The time now is 11:48 PM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.