Trick Flow Track Heat Intake Manifold

SNmustang95 · May 17th, 2011, 12:46 PM

Ok I'm looking into buying this soon (the one off Late model. part #TFS-51511002) question is though, do i need a elbow piece? and should i get a bigger TB with it?

nxcoupe · May 17th, 2011, 01:09 PM

Is it cheaper off them than Summit? Summit is right next to Trick Flow, jfyi. You will need an elbow to keep your existing throttle body and egr. A 70 or 75 will work fine with that intake, but without knowing what else you have done to your car, I really can't give good advice.

SNmustang95 · May 17th, 2011, 01:46 PM

No engine work except a CAI. Everything else is gears, X pipe an cat back.

Gregg@TrickFlow · May 18th, 2011, 10:30 AM

You will need the elbow and you can go with the stock TB or upgrade to the 70mm.

nxcoupe · May 18th, 2011, 10:33 AM

Originally Posted by Gregg@TrickFlow

You will need the elbow and you can go with the stock TB or upgrade to the 70mm.

Gregg, get back to work!!!

Gregg@TrickFlow · May 18th, 2011, 10:38 AM

Originally Posted by nxcoupe

Gregg, get back to work!!!

This is my work....

nxcoupe · May 18th, 2011, 10:45 AM

Originally Posted by Gregg@TrickFlow

This is my work....

That a pic of the paint work plated did on your car?

SNmustang95 · May 18th, 2011, 12:09 PM

Originally Posted by Gregg@TrickFlow

You will need the elbow and you can go with the stock TB or upgrade to the 70mm.

Would you upgrade the TB?

nxcoupe · May 18th, 2011, 12:58 PM

Yes, that is what he is saying. If you plan future mods, the tb will grow with you.

SNmustang95 · May 18th, 2011, 01:01 PM

800 for all that. with shipping. DAMN i wish i had a discount with summit. oh well, it'll be worth it.

Gregg@TrickFlow · May 19th, 2011, 10:40 AM

Originally Posted by nxcoupe

That a pic of the paint work plated did on your car?

Nope no new pictures yet.

flattusmaximus78 · May 19th, 2011, 11:07 AM

Please go to corral, and buy this stuff used. $800 for that is a rip off and it will barely improve this nature of your car. Room to grow sure, but your bottle neck is your heads, so you really wont even feel the improvement. So if you don't feel the power in your butt, it's better to not have taken it, in the butt.

ryanw · May 21st, 2011, 10:54 AM

ya buy that stuff used for sure, most likely you'll get it a half that price or close to half , either way your going to save a but load of money...And yes you will need the elbow piece because you have a 95 year model

93hatch · May 21st, 2011, 11:09 AM

wont do shit to that car if you have stock heads and cam. Be better off with a 100 dollar explorer intake or buy flattus cobra intake

SNmustang95 · May 21st, 2011, 12:17 PM

So I should save for heads then? What type of heads should I get? I've been looking at trick flow heads.

ryanw · May 21st, 2011, 12:27 PM

Originally Posted by SNmustang95

So I should save for heads then? What type of heads should I get? I've been looking at trick flow heads.

good choice, trick flow
get them used

SNmustang95 · May 21st, 2011, 12:40 PM

Originally Posted by ryanw

good choice, trick flow
get them used

I've been looking around. Craigslist has nothing. Where's a good place to look?

tyler97 · May 21st, 2011, 01:32 PM

corral

ryanw · May 21st, 2011, 01:35 PM

Originally Posted by SNmustang95

I've been looking around. Craigslist has nothing. Where's a good place to look?

The Corral classifieds
eBay - New & used electronics, cars, apparel, collectibles, sporting goods & more at low prices
TFS Heads for Small Block Ford | eBay you probably wont get these cuz there already at 800 dollars and there's still 5 days left on the auction this is there 170 head

SNmustang95 · May 21st, 2011, 02:38 PM

Alright. Thanks Ryan I'll be sure to check it out.

May 17th, 2011, 01:09 PM	#2
nxcoupe Regular Join Date: Mar 2011 Location: Dayton, Ohio Posts: 181 iTrader: 0 reviews	Is it cheaper off them than Summit? Summit is right next to Trick Flow, jfyi. You will need an elbow to keep your existing throttle body and egr. A 70 or 75 will work fine with that intake, but without knowing what else you have done to your car, I really can't give good advice. __________________ 90 GT 393 5 spd, 467 rwhp 480 rwtq 92 coupe, R/S 308 5 spd 93 coupe, 2.3 5 spd Last edited by nxcoupe; May 18th, 2011 at 10:35 AM.

May 18th, 2011, 10:30 AM	#4
Gregg@TrickFlow Regular Join Date: Mar 2008 Posts: 65 iTrader: 0 reviews	You will need the elbow and you can go with the stock TB or upgrade to the 70mm. __________________

May 18th, 2011, 12:58 PM	#9
nxcoupe Regular Join Date: Mar 2011 Location: Dayton, Ohio Posts: 181 iTrader: 0 reviews	Yes, that is what he is saying. If you plan future mods, the tb will grow with you. __________________ 90 GT 393 5 spd, 467 rwhp 480 rwtq 92 coupe, R/S 308 5 spd 93 coupe, 2.3 5 spd

May 19th, 2011, 11:07 AM	#12
flattusmaximus78 I Post Entirely Way Too Much 1993 5.ohhhh 12.97 @140mph Join Date: Apr 2006 Location: Gatorland Posts: 6,122 iTrader: 3 reviews	Please go to corral, and buy this stuff used. $800 for that is a rip off and it will barely improve this nature of your car. Room to grow sure, but your bottle neck is your heads, so you really wont even feel the improvement. So if you don't feel the power in your butt, it's better to not have taken it, in the butt. __________________ 02 Pewter z28, hoosiers/lid/exhaust/spray...125mph 1993 gt Sold, already missed --Moates Quarter horse $225-- --Cobra intake $150-- --tremec 3550 bell and shifter $1100--

May 21st, 2011, 10:54 AM	#13
ryanw I Post Entirely Way Too Much 1991 Ford Mustang GT Join Date: May 2007 Location: San Diego, California Posts: 6,063 iTrader: 0 reviews	ya buy that stuff used for sure, most likely you'll get it a half that price or close to half , either way your going to save a but load of money...And yes you will need the elbow piece because you have a 95 year model __________________ DART 331ci stroker, AFR 185 heads, Trick Flow R intake, Accufab 70mm tb, 75mm pro m Maf, 30lb injectors, jba headers, 2 1/2" x pipe flowmaster super 10 mufflers, 255 fuel pump, 3:27 gears

May 21st, 2011, 11:09 AM	#14
93hatch Banned 1992 Lx 11.39@119.24 Join Date: Jan 2008 Location: Az Posts: 11,644 iTrader: 0 reviews	wont do shit to that car if you have stock heads and cam. Be better off with a 100 dollar explorer intake or buy flattus cobra intake __________________ [QUOTE=93mustank;2577445]We speed tested my right arm for quickness in shifts... So he could design the cam for proper shift recovery.[/QUOTE]

May 21st, 2011, 01:32 PM	#18
tyler97 Regular 1991 gt cobra clone Join Date: Apr 2011 Location: FL Posts: 374 iTrader: 0 reviews	corral __________________ 1991 GT- Ripped torque boxes/no SFCs/306/24lb injectors/Twisted Wedge 170s/Full exhaust/Full bolt ons/X3Z computer Buid thread http://www.moddedmustangs.com/forums...ld-thread.html

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

Threads Similar to: Trick Flow Track Heat Intake Manifold
Thread	Thread Starter	Forum	Replies	Last Post
Trick Flow Track Heat Intake	BadBlackGT	5.0 Mustangs	12	August 30th, 2010 08:50 PM
Trick Flow Track Heat vs. Explorer Intake	lakefrontlivin	94-95	16	February 18th, 2010 11:13 AM
Trick Flow Track Heat vs. Explorer Intake	lakefrontlivin	5.0 Mustangs	46	February 12th, 2010 08:04 AM
New Trick Flow Track Heat Intake	cowboyup351	5.0 Mustangs	9	March 31st, 2009 12:06 PM
Trick Flow Track Heat HP	burnout5.0	94-95	18	May 9th, 2008 09:11 AM

All times are GMT -4. The time now is 04:55 AM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.