Check these out.

fast5.0lx · May 30th, 2011, 01:06 PM

My little brother is working on a 93 vert, switching from a 4 to a 5.0. He doesn't have much money, so I already hooked him up with some equal length shorties, an off road h, and a flowmaster catback. I found these heads on corral.net, there cheap, but for a gift what do you guys think.
For Sale 225cfm fully customized E7's w/ 1.7 rockers + pushrods. - Ford Mustang Forums : Corral.net Mustang Forum

fogged306 · May 30th, 2011, 04:05 PM

Those flow pretty good for a set of E7's, but I still wouldn't pay 500 plus shipping. Shipping will be expensive on a set of iron heads. For a gift that's cool and all, but maybe have him throw in a couple bucks and look for a set of used aluminum heads that flow more out of the box. Just my .02

fast5.0lx · May 30th, 2011, 06:19 PM

Thats a good idea. I just didnt want him to know. What do you think would be a good price for them?

fast5.0lx · June 3rd, 2011, 09:21 AM

damn, 108 views and only one responce. Does anybody have any opinions?

95tbirdv8 · June 3rd, 2011, 10:51 AM

I wouldn't pay that much for those heads. Keep looking around

ryanw · June 4th, 2011, 12:23 AM

shipping iron heads can run upwards of over a 100 bucks.....when i sold my old world product sr heads and roller rockers it cost around 118 dollars, that doesnt mean that i couldnt have found a cheaper shipping method...the price was through usps, so i figure with out the roller rockers it will cost 105 bucks.....aluminum is about half the weight so it should be half the cost

so youll really be paying 600 dollars for those heads, give or take 25 bucks

May 30th, 2011, 01:06 PM	#1
fast5.0lx Regular 1988 Mustang GT 31.35@55 Join Date: May 2006 Location: Lovington NM Posts: 120 iTrader: 0 reviews	Check these out. My little brother is working on a 93 vert, switching from a 4 to a 5.0. He doesn't have much money, so I already hooked him up with some equal length shorties, an off road h, and a flowmaster catback. I found these heads on corral.net, there cheap, but for a gift what do you guys think. For Sale 225cfm fully customized E7's w/ 1.7 rockers + pushrods. - Ford Mustang Forums : Corral.net Mustang Forum __________________ 88 gt 5spd. twisted wedge 170's, tfs stage1 cam, fms 1.72rr, edey rpm air gap intake, holley 650 ultra dp, full msd ignition, BBK full length headers, off-road x-pipe, mac pro-dump exhaust, 4.10 gears, pro 5.0 short shifter

May 30th, 2011, 06:19 PM	#3
fast5.0lx Regular 1988 Mustang GT 31.35@55 Join Date: May 2006 Location: Lovington NM Posts: 120 iTrader: 0 reviews	Thats a good idea. I just didnt want him to know. What do you think would be a good price for them? __________________ 88 gt 5spd. twisted wedge 170's, tfs stage1 cam, fms 1.72rr, edey rpm air gap intake, holley 650 ultra dp, full msd ignition, BBK full length headers, off-road x-pipe, mac pro-dump exhaust, 4.10 gears, pro 5.0 short shifter

June 3rd, 2011, 09:21 AM	#4
fast5.0lx Regular 1988 Mustang GT 31.35@55 Join Date: May 2006 Location: Lovington NM Posts: 120 iTrader: 0 reviews	damn, 108 views and only one responce. Does anybody have any opinions? __________________ 88 gt 5spd. twisted wedge 170's, tfs stage1 cam, fms 1.72rr, edey rpm air gap intake, holley 650 ultra dp, full msd ignition, BBK full length headers, off-road x-pipe, mac pro-dump exhaust, 4.10 gears, pro 5.0 short shifter

June 3rd, 2011, 10:51 AM	#5
95tbirdv8 Enthusiast 1990 mustang gt Join Date: May 2010 Location: houston, tx Posts: 627 iTrader: 0 reviews	I wouldn't pay that much for those heads. Keep looking around __________________ Burning Rubber in the 5.0 http://www.youtube.com/watch?v=mKGSmRkKQcM95 95 mark8 lsc 95 tbird v8 90 mustang gt 07 silverado v8 08 yamaha r6 to be continued........ foxbodyperformance.com is the way to go

June 4th, 2011, 12:23 AM	#6
ryanw I Post Entirely Way Too Much 1991 Ford Mustang GT Join Date: May 2007 Location: San Diego, California Posts: 6,063 iTrader: 0 reviews	shipping iron heads can run upwards of over a 100 bucks.....when i sold my old world product sr heads and roller rockers it cost around 118 dollars, that doesnt mean that i couldnt have found a cheaper shipping method...the price was through usps, so i figure with out the roller rockers it will cost 105 bucks.....aluminum is about half the weight so it should be half the cost so youll really be paying 600 dollars for those heads, give or take 25 bucks __________________ DART 331ci stroker, AFR 185 heads, Trick Flow R intake, Accufab 70mm tb, 75mm pro m Maf, 30lb injectors, jba headers, 2 1/2" x pipe flowmaster super 10 mufflers, 255 fuel pump, 3:27 gears

May 30th, 2011, 04:05 PM	#2
fogged306 MM Fanatic 89 GT Join Date: Apr 2007 Location: NY Posts: 4,875 iTrader: 2 reviews	Those flow pretty good for a set of E7's, but I still wouldn't pay 500 plus shipping. Shipping will be expensive on a set of iron heads. For a gift that's cool and all, but maybe have him throw in a couple bucks and look for a set of used aluminum heads that flow more out of the box. Just my .02

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

Threads Similar to: Check these out.
Thread	Thread Starter	Forum	Replies	Last Post
CHECK CHECK -- Mounting bracket F/S for deal	aluv4speed	99-04	1	October 11th, 2010 05:25 PM
Check this out.	sickfox	5.0 Mustangs	0	September 1st, 2009 10:34 PM
check this	Mustang_GTX	The Clubhouse	1	August 16th, 2009 03:35 AM
LOL! Check this out	futureMACH1racer	The Clubhouse	12	June 4th, 2009 01:40 AM
Check It Out...	XTCNAGT	The Clubhouse	8	December 17th, 2007 01:26 PM

All times are GMT -4. The time now is 03:14 AM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.