5.0 with 04 cobra supercharger????????????

1987mustanggt · September 28th, 2011, 02:59 PM

ok so im getting a sweet deal on a eaton supercharger the one that came on the 04 cobras... is there a way that i can adapt it onto my 5.0?????? i wanna be sure it can be done before i get it...so help please???

fogged306 · September 28th, 2011, 04:19 PM

Eaton M112 Install on 5.0 LTD (pics!) - Ford Mustang Forums : Corral.net Mustang Forum

1987mustanggt · September 28th, 2011, 04:52 PM

thnx but i found better alternative... well since i dont know shit bout the eaton superchargers.... do they run off oil lines???? or how do they get lubricated???secondly will it work with a 70mm?? or do i need a 90mm???

1987mustanggt · September 28th, 2011, 04:53 PM

im thinking bout using 30 lb injectors for about 6 lbs for now... or should i use 42s?????? and will upgrading to a better radiator be good if i decide to do 10lbs??? or should i run a intercooler??? and will it work with this setup?

SNmustang95 · September 29th, 2011, 01:09 AM

Damn, I wish I had known about that link. I could have bought one for cheap.

91cobra5.0 · September 29th, 2011, 05:08 AM

i wouldnt even try it, there is a stupid amount of fab work needed for a project like that

1987mustanggt · September 29th, 2011, 02:41 PM

91cobra not true... i found a dude that sells kits for 700 on corral and his shit is tight ill post a video

1987mustanggt · September 29th, 2011, 02:45 PM

1987mustanggt · September 29th, 2011, 02:45 PM

Eaton M112 Cobra Supercharger on 5.0 Mustang - YouTube

fogged306 · September 29th, 2011, 02:54 PM

Originally Posted by 1987mustanggt

Eaton M112 Cobra Supercharger on 5.0 Mustang - YouTube

lol, good luck getting a hood on that.

SNmustang95 · September 29th, 2011, 02:56 PM

fuck that. I'd rather place a 2.1 on mine. way easier.

1987mustanggt · September 29th, 2011, 02:57 PM

well the guy said he needed a 2in cowl hood after he dropped it with lower motor mounts...plus a 2 in cowl hood aint that bad..even though i like the stock look

zinc-vert02 · September 29th, 2011, 03:00 PM

the build thread on corral is pretty cool, he seemed to have good results from it to

1987mustanggt · September 29th, 2011, 03:13 PM

thank u zinc vert... i think he pushing 14lbs of boost right now...with like 450 sumthing ;bs of torque... and 480 hp

zinc-vert02 · September 29th, 2011, 03:14 PM

i like it beacuse its something different, you wont see many foxs pop the hood with an eaton on it

1987mustanggt · September 29th, 2011, 03:18 PM

my thoughts exactly plus that supercharger whine is just sexy...its like hearing a girl having a orgasm....

fogged306 · September 29th, 2011, 04:13 PM

Must be the angle of the camera in the video then because that snout looks like its way above what a 2" cowl would clear.

1987mustanggt · September 29th, 2011, 04:49 PM

no on the video it was his first bracket he made later he modified the lower intake to be shorter and dropped it with shorter motor mounts ill post a video

fogged306 · September 29th, 2011, 05:11 PM

I just found that thread on corral actually. I saw the video of the lower blower. He also said that to get it to clear a 2" he spaced the k-member down some. Made some pretty impressive numbers for what he had in any event. it won't make high RPM numbers, but should be a fun street car.

1987mustanggt · September 29th, 2011, 07:50 PM

like i said sumtin fun n unusual

September 28th, 2011, 02:59 PM	#1
1987mustanggt Regular 1987mustang gt ?? Join Date: Jul 2010 Location: cali Posts: 282 Blog Entries: 3 iTrader: 0 reviews	5.0 with 04 cobra supercharger???????????? ok so im getting a sweet deal on a eaton supercharger the one that came on the 04 cobras... is there a way that i can adapt it onto my 5.0?????? i wanna be sure it can be done before i get it...so help please???

September 29th, 2011, 03:00 PM	#13
zinc-vert02 Bringing Yellow Back 2002 mustang gt 12.2 at 117 Join Date: Apr 2010 Location: WISCONSIN Posts: 9,965 iTrader: 1 reviews	the build thread on corral is pretty cool, he seemed to have good results from it to __________________ SOON TO BE 5.4 3V POWERD WITH A ROUSH CHARGER HELPING IT BAMA Performance Drag Team Member #4

September 29th, 2011, 03:14 PM	#15
zinc-vert02 Bringing Yellow Back 2002 mustang gt 12.2 at 117 Join Date: Apr 2010 Location: WISCONSIN Posts: 9,965 iTrader: 1 reviews	i like it beacuse its something different, you wont see many foxs pop the hood with an eaton on it __________________ SOON TO BE 5.4 3V POWERD WITH A ROUSH CHARGER HELPING IT BAMA Performance Drag Team Member #4

LinkBacks (?) LinkBack to this Thread: http://www.moddedmustangs.com/forums/5-0-mustangs/234760-5-0-04-cobra-supercharger.html
Posted By	For	Type	Date
Thread 5.0 with 04 cobra supercharger???????????? \| Forums at Modded Mustangs \| BoardReader	This thread	Refback	December 13th, 2011 08:27 PM

Threads Similar to: 5.0 with 04 cobra supercharger????????????
Thread	Thread Starter	Forum	Replies	Last Post
99 Cobra Vortech V2-E supercharger kit on 01 Cobra?	01svtcobrajlt	4V / SVT	8	December 14th, 2010 10:35 AM
1999 cobra with 03 cobra supercharger	Teknicz	4V / SVT	2	December 11th, 2010 10:31 AM
1996 cobra swap with 03 cobra heads and supercharger.	stan's96snake	96-98	14	October 30th, 2010 03:57 PM
96 cobra engine/03 cobra supercharger	96 PI	96-98	28	October 20th, 2010 06:10 PM
Supercharger for 98 Cobra	Rakkasan21	96-98	47	February 28th, 2008 12:17 PM

September 28th, 2011, 04:19 PM	#2
fogged306 MM Fanatic 89 GT Join Date: Apr 2007 Location: NY Posts: 4,875 iTrader: 2 reviews	Eaton M112 Install on 5.0 LTD (pics!) - Ford Mustang Forums : Corral.net Mustang Forum

September 28th, 2011, 04:52 PM	#3
1987mustanggt Regular 1987mustang gt ?? Join Date: Jul 2010 Location: cali Posts: 282 Blog Entries: 3 iTrader: 0 reviews	thnx but i found better alternative... well since i dont know shit bout the eaton superchargers.... do they run off oil lines???? or how do they get lubricated???secondly will it work with a 70mm?? or do i need a 90mm???

September 28th, 2011, 04:53 PM	#4
1987mustanggt Regular 1987mustang gt ?? Join Date: Jul 2010 Location: cali Posts: 282 Blog Entries: 3 iTrader: 0 reviews	im thinking bout using 30 lb injectors for about 6 lbs for now... or should i use 42s?????? and will upgrading to a better radiator be good if i decide to do 10lbs??? or should i run a intercooler??? and will it work with this setup?

September 29th, 2011, 05:08 AM	#6
91cobra5.0 Hardcore Enthusiast 98 Cobra Join Date: Jan 2008 Location: Bay Area, Ca Posts: 2,057 iTrader: 0 reviews	i wouldnt even try it, there is a stupid amount of fab work needed for a project like that

September 29th, 2011, 02:41 PM	#7
1987mustanggt Regular 1987mustang gt ?? Join Date: Jul 2010 Location: cali Posts: 282 Blog Entries: 3 iTrader: 0 reviews	91cobra not true... i found a dude that sells kits for 700 on corral and his shit is tight ill post a video

September 29th, 2011, 02:45 PM	#8
1987mustanggt Regular 1987mustang gt ?? Join Date: Jul 2010 Location: cali Posts: 282 Blog Entries: 3 iTrader: 0 reviews	<iframe width="560" height="315" src="http://www.youtube.com/embed/Otoahel4gT8" frameborder="0" allowfullscreen></iframe>

September 29th, 2011, 02:57 PM	#12
1987mustanggt Regular 1987mustang gt ?? Join Date: Jul 2010 Location: cali Posts: 282 Blog Entries: 3 iTrader: 0 reviews	well the guy said he needed a 2in cowl hood after he dropped it with lower motor mounts...plus a 2 in cowl hood aint that bad..even though i like the stock look

September 29th, 2011, 03:13 PM	#14
1987mustanggt Regular 1987mustang gt ?? Join Date: Jul 2010 Location: cali Posts: 282 Blog Entries: 3 iTrader: 0 reviews	thank u zinc vert... i think he pushing 14lbs of boost right now...with like 450 sumthing ;bs of torque... and 480 hp

September 29th, 2011, 03:18 PM	#16
1987mustanggt Regular 1987mustang gt ?? Join Date: Jul 2010 Location: cali Posts: 282 Blog Entries: 3 iTrader: 0 reviews	my thoughts exactly plus that supercharger whine is just sexy...its like hearing a girl having a orgasm....

September 29th, 2011, 04:13 PM	#17
fogged306 MM Fanatic 89 GT Join Date: Apr 2007 Location: NY Posts: 4,875 iTrader: 2 reviews	Must be the angle of the camera in the video then because that snout looks like its way above what a 2" cowl would clear.

September 29th, 2011, 04:49 PM	#18
1987mustanggt Regular 1987mustang gt ?? Join Date: Jul 2010 Location: cali Posts: 282 Blog Entries: 3 iTrader: 0 reviews	no on the video it was his first bracket he made later he modified the lower intake to be shorter and dropped it with shorter motor mounts ill post a video

September 29th, 2011, 05:11 PM	#19
fogged306 MM Fanatic 89 GT Join Date: Apr 2007 Location: NY Posts: 4,875 iTrader: 2 reviews	I just found that thread on corral actually. I saw the video of the lower blower. He also said that to get it to clear a 2" he spaced the k-member down some. Made some pretty impressive numbers for what he had in any event. it won't make high RPM numbers, but should be a fun street car.

September 29th, 2011, 07:50 PM	#20
1987mustanggt Regular 1987mustang gt ?? Join Date: Jul 2010 Location: cali Posts: 282 Blog Entries: 3 iTrader: 0 reviews	like i said sumtin fun n unusual

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

All times are GMT -4. The time now is 03:32 AM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.