347 solid roller cam build up

slowta · June 7th, 2007, 01:43 PM

Hey how it going

This is my first post on this site.I need a little help picking a solid roller cam.This motor is going in my weekend warrior car that see's the drag strip often. Here's the combo I have so far.

347 forged short block
205 afr heads 10.5:1 compression ratio
edelbrock victor intake and 70mm tb
1.6 roller rockers
Long tube headers

THank's for any help you can give me
Dan :award

Drick · June 7th, 2007, 02:05 PM

Welcome to the site

My boss 302 enigine has a comp soild lifter cam in it they make good cams and im happy with it

flamestang · June 7th, 2007, 02:26 PM

check out comp cams xfi 's they are made for strokers

slowta · June 7th, 2007, 04:05 PM

Thanks for the welcome. I was looking that the comp xfi stroker cams but I think a solid roller is a better match for the afr 205 heads.

Tony_90fox · June 7th, 2007, 06:18 PM

www.flowtechinduction.com

Why not get a custom cam?

slowta · June 7th, 2007, 06:44 PM

I was thinking about a custon grind but I was hoping to use an off the self cam.So I could save some time and money.In the end if the off the self cam falls short of my expectations,I'll spend the money and time to get a custom grind.

Tony_90fox · June 8th, 2007, 05:47 PM

I completely understand. But you would be surprised how much HP is found with a custom cam.

1slo5.0 · June 8th, 2007, 05:50 PM

Call Cam Motion and have them do a custom grind. Why spend all the money on good heads and everything else and then take a gamble with an off the shelf cam? Seems kind of foolish to me. My last cam from Cam Motion cost me about $275 delivered to my door and I had it within 7 days of placing the order.

slowta · June 9th, 2007, 04:15 PM

I hear you guy's.I start doing my homework on a custom cam.

vfast · June 9th, 2007, 04:45 PM

that engine will have issues on the street....is it going to be a carb or FI?
cam innovators might be a choice for ya

Originally Posted by slowta

Hey how it going

This is my first post on this site.I need a little help picking a solid roller cam.This motor is going in my weekend warrior car that see's the drag strip often. Here's the combo I have so far.

347 forged short block
205 afr heads 10.5:1 compression ratio
edelbrock victor intake and 70mm tb
1.6 roller rockers
Long tube headers

THank's for any help you can give me
Dan :award

slowta · June 9th, 2007, 06:31 PM

It's going to be efi.

TurboLX · June 9th, 2007, 07:54 PM

when i still had my 347 i had a custom grind cam from comp cams

vfast · June 10th, 2007, 10:02 AM

homework?..just call Jay Allen of cam innovations..he'll hook you up

needpushrod · February 19th, 2009, 06:37 PM

205's are really big wow that motor is going to make some power

89LX347 · February 19th, 2009, 06:40 PM

Originally Posted by needpushrod

205's are really big wow that motor is going to make some power

wow, way to pull up an old thread

needpushrod · February 19th, 2009, 06:42 PM

omg im sorry i did a search and didn't realize, sorry everyone i need to stop being a noob

needpushrod · February 19th, 2009, 06:43 PM

but wow half the people who posted are banned

Sleeper_Stang_89 · February 19th, 2009, 10:26 PM

Originally Posted by needpushrod

205's are really big wow that motor is going to make some power

June 7th, 2007, 01:43 PM	#1
slowta Newbie Join Date: Jun 2007 Posts: 5 iTrader: 0 reviews	347 solid roller cam build up Hey how it going This is my first post on this site.I need a little help picking a solid roller cam.This motor is going in my weekend warrior car that see's the drag strip often. Here's the combo I have so far. 347 forged short block 205 afr heads 10.5:1 compression ratio edelbrock victor intake and 70mm tb 1.6 roller rockers Long tube headers THank's for any help you can give me Dan :award

June 7th, 2007, 02:05 PM	#2
Drick Big timin' in a small town 2004 FX4 F150, 86 GT Join Date: Apr 2007 Location: Gods country. Nordern Michigan eh Posts: 14,336 iTrader: 1 reviews	Welcome to the site My boss 302 enigine has a comp soild lifter cam in it they make good cams and im happy with it __________________ FX4 Crew Crew member #1 Don't take anything I say to heart, I don't try to come off as an asshole. It just happens

June 7th, 2007, 06:18 PM	#5
Tony_90fox Banned Join Date: Jun 2006 Location: Bowling Green, KY Posts: 3,803 iTrader: 0 reviews	www.flowtechinduction.com Why not get a custom cam? __________________ [SIGPIC][/SIGPIC] [B][U]MM Sapper Squad[/U][/B] [QUOTE=Regency 2007;1676187]MSO's stupidity has never stopped amazing me since the day he joined this forum.[/QUOTE]

June 8th, 2007, 05:47 PM	#7
Tony_90fox Banned Join Date: Jun 2006 Location: Bowling Green, KY Posts: 3,803 iTrader: 0 reviews	I completely understand. But you would be surprised how much HP is found with a custom cam. __________________ [SIGPIC][/SIGPIC] [B][U]MM Sapper Squad[/U][/B] [QUOTE=Regency 2007;1676187]MSO's stupidity has never stopped amazing me since the day he joined this forum.[/QUOTE]

June 8th, 2007, 05:50 PM	#8
1slo5.0 MM Ninjas! 1990 Mustang LX 9.36@143 mph Join Date: Jan 2006 Location: North Fond du Lac, Wisconsin Posts: 11,375 iTrader: 1 reviews	Call Cam Motion and have them do a custom grind. Why spend all the money on good heads and everything else and then take a gamble with an off the shelf cam? Seems kind of foolish to me. My last cam from Cam Motion cost me about $275 delivered to my door and I had it within 7 days of placing the order. __________________ My daily driver has 16 cylinders and 4400hp @ 1000 rpm.... ***1988 Mustang GT - Stock....almost

June 7th, 2007, 02:26 PM	#3
flamestang Regular Join Date: Apr 2007 Posts: 338 iTrader: 0 reviews	check out comp cams xfi 's they are made for strokers

June 7th, 2007, 04:05 PM	#4
slowta Newbie Join Date: Jun 2007 Posts: 5 iTrader: 0 reviews	Thanks for the welcome. I was looking that the comp xfi stroker cams but I think a solid roller is a better match for the afr 205 heads.

June 7th, 2007, 06:44 PM	#6
slowta Newbie Join Date: Jun 2007 Posts: 5 iTrader: 0 reviews	I was thinking about a custon grind but I was hoping to use an off the self cam.So I could save some time and money.In the end if the off the self cam falls short of my expectations,I'll spend the money and time to get a custom grind.

June 9th, 2007, 04:15 PM	#9
slowta Newbie Join Date: Jun 2007 Posts: 5 iTrader: 0 reviews	I hear you guy's.I start doing my homework on a custom cam.

June 9th, 2007, 06:31 PM	#11
slowta Newbie Join Date: Jun 2007 Posts: 5 iTrader: 0 reviews	It's going to be efi.

June 9th, 2007, 07:54 PM	#12
TurboLX I Post Entirely Way Too Much 1988 Mustang LX Turbo Join Date: Oct 2006 Location: NY Posts: 8,778 Blog Entries: 1 iTrader: 0 reviews	when i still had my 347 i had a custom grind cam from comp cams __________________ 1988 LX Coupe 2.5L, GT35R, 44mm WG, 32psi, C16.

June 10th, 2007, 10:02 AM	#13
vfast Banned Join Date: Aug 2005 Location: shimmy shack takeout Posts: 1,084 iTrader: 0 reviews	homework?..just call Jay Allen of cam innovations..he'll hook you up __________________ EVERYONE IS ENTITLED TO MY OPINION:cool: 6'ers are for kids 1965 chevelle SS 421 sbc 6 speed, 3.90 gears,alum d-shaft, brodix heads,roller cam,925 AED carb...grocery getter[COLOR="Red"]RIP[/COLOR]

February 19th, 2009, 06:37 PM	#14
needpushrod Newbie Join Date: Feb 2009 Posts: 24 iTrader: 0 reviews	205's are really big wow that motor is going to make some power

February 19th, 2009, 06:42 PM	#16
needpushrod Newbie Join Date: Feb 2009 Posts: 24 iTrader: 0 reviews	omg im sorry i did a search and didn't realize, sorry everyone i need to stop being a noob

February 19th, 2009, 06:43 PM	#17
needpushrod Newbie Join Date: Feb 2009 Posts: 24 iTrader: 0 reviews	but wow half the people who posted are banned

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

Threads Similar to: 347 solid roller cam build up
Thread	Thread Starter	Forum	Replies	Last Post
Solid lifters	JBIGBOOTSY	5.0 Mustangs	4	September 21st, 2007 01:39 PM
Hydrolic roller to Solid/Mechanical roller	hitorx	5.0 Mustangs	2	May 14th, 2007 05:12 PM
ABS on solid rear???	fastvenom01	99-04	2	April 18th, 2007 07:53 PM
roller vs. non roller block	DJKING	5.0 Mustangs	11	March 29th, 2007 11:53 AM

All times are GMT -4. The time now is 04:02 AM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.

347 solid roller cam build up

347 solid roller cam build up

Re: 347 solid roller cam build up