where can i get a power steering pulley

brandon444 · February 4th, 2012, 07:17 PM

any one have an old one or where can i get one

FastStang91Lx · February 4th, 2012, 07:41 PM

Want mine?.... You can have it for shipping cost. My ps is shot anyway. Let me go pull it off, and I'll get back to ya

brandon444 · February 4th, 2012, 07:43 PM

as long as its straight then sure. whats the part number on the face of it?

FastStang91Lx · February 4th, 2012, 07:54 PM

I can't find my puller for some reason.... I hope it's not still in my home town. I'll see if my brother in law has his at home.... and my car is a 91 too. I'm sure it's the same one, lol. Hold tight.

FastStang91Lx · February 4th, 2012, 08:02 PM

Brother in laws is in his toolbox at the dealership, so that's a no go. If I run to the bigger close town tomorrow, I can stop at O'riley's or Advance and borrow one if you don't get an answer from someone else before that. Yes, mine is straight. The ps shit out and I'm going manual anyway, so now's the time. The part number is D9ZC3 D673A3 A

brandon444 · February 4th, 2012, 08:06 PM

same number. im not it that big of rush for it just in the next week or so

pm me what you want for it

Ninety3Coupe · February 4th, 2012, 08:10 PM

Fast- Are you some sort of Fox body super-hero?

brandon444 · February 4th, 2012, 08:13 PM

Originally Posted by Ninety3Coupe

Fast- Are you some sort of Fox body super-hero?

im gonna say yes he is lol

i looked for hours through junk yards and the part stores i went to couldnt get one or some other excuse

Ninety3Coupe · February 4th, 2012, 08:16 PM

There is not going to be anything left of his car by month's end.

FastStang91Lx · February 4th, 2012, 08:20 PM

Lol.... As long as it's something I don't need, it's better than going into the scrap barrel. I also have a complete parts car in my hometown at my buddies shop for the project car behind my garage. And there's a couple other parts cars down there too, so it's really no big deal. It'll fit in the small flat rate box which runs 5.35, and I'll PM you my paypal when I get it off.

brandon444 · February 4th, 2012, 08:27 PM

sounds good man, thanks again sir

FastStang91Lx · February 6th, 2012, 08:10 PM

Pulley is off and ready for shipment. PM me your details and I'll get it in the mail tomorrow. I will send you a PM with my paypal info. Good luck, and you probably already know, but don't forget to use the correct puller/installer so you don't damage the pulley

brandon444 · February 6th, 2012, 08:58 PM

thanks once again fast

reps will def be given lol

February 4th, 2012, 07:17 PM	#1
brandon444 Regular 91 Mustang LX 5.0 Join Date: Jan 2011 Location: Haubstadt, IN Posts: 469 iTrader: 0 reviews	where can i get a power steering pulley any one have an old one or where can i get one

February 4th, 2012, 07:41 PM	#2
FastStang91Lx I Post Entirely Way Too Much 1991 Mustang LX 5.0 Join Date: Jan 2010 Location: Minnesota Posts: 5,572 iTrader: 2 reviews	Want mine?.... You can have it for shipping cost. My ps is shot anyway. Let me go pull it off, and I'll get back to ya __________________ Point made in less than a few hours with minimal response. http://www.moddedmustangs.com/forums...ml#post4465184

February 4th, 2012, 07:54 PM	#4
FastStang91Lx I Post Entirely Way Too Much 1991 Mustang LX 5.0 Join Date: Jan 2010 Location: Minnesota Posts: 5,572 iTrader: 2 reviews	I can't find my puller for some reason.... I hope it's not still in my home town. I'll see if my brother in law has his at home.... and my car is a 91 too. I'm sure it's the same one, lol. Hold tight. __________________ Point made in less than a few hours with minimal response. http://www.moddedmustangs.com/forums...ml#post4465184

February 4th, 2012, 08:02 PM	#5
FastStang91Lx I Post Entirely Way Too Much 1991 Mustang LX 5.0 Join Date: Jan 2010 Location: Minnesota Posts: 5,572 iTrader: 2 reviews	Brother in laws is in his toolbox at the dealership, so that's a no go. If I run to the bigger close town tomorrow, I can stop at O'riley's or Advance and borrow one if you don't get an answer from someone else before that. Yes, mine is straight. The ps shit out and I'm going manual anyway, so now's the time. The part number is D9ZC3 D673A3 A __________________ Point made in less than a few hours with minimal response. http://www.moddedmustangs.com/forums...ml#post4465184

February 4th, 2012, 08:10 PM	#7
Ninety3Coupe I need a 5 lug kit 1993 Mustang LX 5.0 Join Date: Feb 2012 Location: Anaheim, Ca. Posts: 336 iTrader: 1 reviews	Fast- Are you some sort of Fox body super-hero? __________________ Half of Maximum Motorsports Catalog, Full Intake, Full Exhaust. Needs paint and $35,000 in mods. Car / Build Photos: http://photobucket.com/CoupePictures

February 4th, 2012, 07:43 PM	#3
brandon444 Regular 91 Mustang LX 5.0 Join Date: Jan 2011 Location: Haubstadt, IN Posts: 469 iTrader: 0 reviews	as long as its straight then sure. whats the part number on the face of it?

February 4th, 2012, 08:06 PM	#6
brandon444 Regular 91 Mustang LX 5.0 Join Date: Jan 2011 Location: Haubstadt, IN Posts: 469 iTrader: 0 reviews	same number. im not it that big of rush for it just in the next week or so pm me what you want for it

February 4th, 2012, 08:16 PM	#9
Ninety3Coupe I need a 5 lug kit 1993 Mustang LX 5.0 Join Date: Feb 2012 Location: Anaheim, Ca. Posts: 336 iTrader: 1 reviews	There is not going to be anything left of his car by month's end. __________________ Half of Maximum Motorsports Catalog, Full Intake, Full Exhaust. Needs paint and $35,000 in mods. Car / Build Photos: http://photobucket.com/CoupePictures

February 4th, 2012, 08:20 PM	#10
FastStang91Lx I Post Entirely Way Too Much 1991 Mustang LX 5.0 Join Date: Jan 2010 Location: Minnesota Posts: 5,572 iTrader: 2 reviews	Lol.... As long as it's something I don't need, it's better than going into the scrap barrel. I also have a complete parts car in my hometown at my buddies shop for the project car behind my garage. And there's a couple other parts cars down there too, so it's really no big deal. It'll fit in the small flat rate box which runs 5.35, and I'll PM you my paypal when I get it off. __________________ Point made in less than a few hours with minimal response. http://www.moddedmustangs.com/forums...ml#post4465184

February 4th, 2012, 08:27 PM	#11
brandon444 Regular 91 Mustang LX 5.0 Join Date: Jan 2011 Location: Haubstadt, IN Posts: 469 iTrader: 0 reviews	sounds good man, thanks again sir

February 6th, 2012, 08:10 PM	#12
FastStang91Lx I Post Entirely Way Too Much 1991 Mustang LX 5.0 Join Date: Jan 2010 Location: Minnesota Posts: 5,572 iTrader: 2 reviews	Pulley is off and ready for shipment. PM me your details and I'll get it in the mail tomorrow. I will send you a PM with my paypal info. Good luck, and you probably already know, but don't forget to use the correct puller/installer so you don't damage the pulley __________________ Point made in less than a few hours with minimal response. http://www.moddedmustangs.com/forums...ml#post4465184

February 6th, 2012, 08:58 PM	#13
brandon444 Regular 91 Mustang LX 5.0 Join Date: Jan 2011 Location: Haubstadt, IN Posts: 469 iTrader: 0 reviews	thanks once again fast reps will def be given lol

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

Threads Similar to: where can i get a power steering pulley
Thread	Thread Starter	Forum	Replies	Last Post
Wobbly Power Steering Pulley	killa04gt	99-04	4	December 16th, 2011 06:58 PM
Power steering pump pulley????	Digsj7	5.0 Mustangs	5	July 16th, 2011 08:49 PM
Power steering pulley search	bossman69	Classic Mustangs	4	November 4th, 2010 08:55 AM
power steering pulley	vxpena	V6 Mustangs	2	July 12th, 2007 01:56 PM
power steering pulley	94stallion	V6 Mustangs	6	May 9th, 2007 03:19 PM

All times are GMT -4. The time now is 04:09 AM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.