Carbed Distributor

gtstang87 · September 12th, 2007, 04:07 PM

For you carbed 302 guys what is your ignition setup. As far as coil, distributor. And how about the wiring just run a hot wire to the distributor or what.

89LX347 · September 12th, 2007, 04:08 PM

a billet distributor from MSD and a blaster coil and the 2 wires coming from the dist. i have going to the 6al box

gtstang87 · September 12th, 2007, 04:28 PM

What kind of blaster coil?

89LX347 · September 12th, 2007, 05:43 PM

well i got the MSD blaster 2 but i reccomend the blaster 3

Iownastang · September 12th, 2007, 10:05 PM

I like the mallory units

Speedstang302 · September 12th, 2007, 10:49 PM

Originally Posted by 89LX347

well i got the MSD blaster 2 but i reccomend the blaster 3

hey whats the dif. rlly..i ran a blaster 2 and loved it, but switched to a fuel injected stang before i could try out the blaster 3

and MSD 6AL igntion, MSD blaster 2 or 3 Coil, MSD pro-billet Dist. and MSD wires like 8.5mm super conductors FTW

89LX347 · September 12th, 2007, 11:40 PM

well i have the blaster 2 also and i love its just people say that since the tower is taller on the blaster 3 and im pretty sure there is more amps that it is better

ryans88gt · September 13th, 2007, 01:23 AM

Dude, I heard the Blast 7 is the best

Seriously, if you have 800 hp of fuel to light off, then maybe you need a blaster 3. The ford stock coil is good to about 450 hp.

Speedstang302 · September 13th, 2007, 10:00 AM

Originally Posted by ryans88gt

Dude, I heard the Blast 7 is the best

Seriously, if you have 800 hp of fuel to light off, then maybe you need a blaster 3. The ford stock coil is good to about 450 hp.

no freakin way..theres no way stock is rated to 450hp.. maybe 45.0hp

jpjp but rlly they are..

ryans88gt · September 13th, 2007, 05:00 PM

OK, well I put down 11.8s with a stock coil and 130 shot of the good stuff with H/C/I.

I guess my stock coil is just "special"

Also my NX tech service guy told me 500 hp is the limit for the stock coil in a fox body mustang. I guess he was full of it too....

Speedstang302 · September 13th, 2007, 05:31 PM

OK good..atleast were cleared up you're both liars...

jp i didnt think it was that much, but i believe you i thought it was more around 350hp..

but an aftermarket one pushing out more volts is always better..

September 12th, 2007, 04:07 PM	#1
gtstang87 Newbie Join Date: May 2007 Location: Kernersville, NC Posts: 20	Carbed Distributor For you carbed 302 guys what is your ignition setup. As far as coil, distributor. And how about the wiring just run a hot wire to the distributor or what.

September 13th, 2007, 05:00 PM	#10
ryans88gt MM Fanatic Join Date: May 2007 Location: Bloomington, IL Posts: 3,769	OK, well I put down 11.8s with a stock coil and 130 shot of the good stuff with H/C/I. I guess my stock coil is just "special" Also my NX tech service guy told me 500 hp is the limit for the stock coil in a fox body mustang. I guess he was full of it too.... __________________ 89 LX 515 hp 497 ftlbs 11.3 @ 125 mph 88 GT 11.4 @ 118

September 13th, 2007, 05:31 PM	#11
Speedstang302 MM Fanatic 1989 Mustang LX 5.0 12.86@ 111mph Join Date: Apr 2007 Location: Massachusetss Posts: 4,622	OK good..atleast were cleared up you're both liars... jp i didnt think it was that much, but i believe you i thought it was more around 350hp.. but an aftermarket one pushing out more volts is always better.. __________________ 1989 Mustang LX 5.0 347ci stroker tremec 3550 edelbrock heads, comp cam, vic jr intake, 750cfm 4150 holley 11.736@119.868mph SOLDSOLDSOLD LOOKING FOR A NEW 5.0... must be 90-93 black 5.0 5spd GT...PM with replys!!!

Threads Similar to: Carbed Distributor
Thread	Thread Starter	Forum	Replies	Last Post
5.0 EFI to 5.8 (carbed to EFI)	SVT Town Car	All Other Vehicles	12	July 8th, 2007 10:41 PM
im going carbed	BCR93stang	5.0 Mustangs	50	July 6th, 2007 07:45 PM
carbed	skid6	5.0 Mustangs	1	June 16th, 2007 07:05 PM
help with nos on a 85 carbed gt	joemoto	Poweradders	1	January 16th, 2007 08:18 PM
Setting Distributor and Timing on a 93 5.0 that is carbed.	83 5.0	5.0 Mustangs	11	September 11th, 2006 07:57 PM

Sponsored Links	Remove Advertisements
Forums at Modded Mustangs Advertisement

September 12th, 2007, 04:08 PM	#2
89LX347 Regular Join Date: Apr 2007 Posts: 428	a billet distributor from MSD and a blaster coil and the 2 wires coming from the dist. i have going to the 6al box

September 12th, 2007, 04:28 PM	#3
gtstang87 Newbie Join Date: May 2007 Location: Kernersville, NC Posts: 20	What kind of blaster coil?

September 12th, 2007, 05:43 PM	#4
89LX347 Regular Join Date: Apr 2007 Posts: 428	well i got the MSD blaster 2 but i reccomend the blaster 3

September 12th, 2007, 11:40 PM	#7
89LX347 Regular Join Date: Apr 2007 Posts: 428	well i have the blaster 2 also and i love its just people say that since the tower is taller on the blaster 3 and im pretty sure there is more amps that it is better

September 13th, 2007, 01:23 AM	#8
ryans88gt MM Fanatic Join Date: May 2007 Location: Bloomington, IL Posts: 3,769	Dude, I heard the Blast 7 is the best Seriously, if you have 800 hp of fuel to light off, then maybe you need a blaster 3. The ford stock coil is good to about 450 hp.

All times are GMT -4. The time now is 01:54 PM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2009, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.