I blew the motor

Iownastang · September 23rd, 2007, 11:01 PM

what 347???

86ttops · September 23rd, 2007, 11:02 PM

Originally Posted by Speedstang302

Originally Posted by jordan

mine does too

you have a 347 bastard

and wow you guys are duesch bags..leave him alone

learn it, but you learned the best/ worst lesson...called experience..

just rebuilt build it and get back out there...

Good luck rebuilding something with a big ass hole in the side of it lol

cams-shelbycobra07 · September 23rd, 2007, 11:05 PM

well it depends what went on how hard it will be to rebuild

Drick · September 23rd, 2007, 11:07 PM

Originally Posted by Speedstang302

Originally Posted by jordan

mine does too

you have a 347 bastard

and wow you guys are duesch bags..leave him alone

learn it, but you learned the best/ worst lesson...called experience..

just rebuilt build it and get back out there...

I resent that comment
-_-

Iownastang · September 23rd, 2007, 11:08 PM

did he blow a HOLE IN THE BLOCK??DAMN!!!!MY MOM BLEW A 305 UP SHE WAS DOING ABOUT 85 IN THIRD GEAR''PISSED OFF''AT 7000+ RPMS AND SHIFTED FROM THIRD TO SECOND.THIS WAS ALONG TIME AGO!!!!THE CAR IS A VERY NICE CAR I STILL HAVE IT.ANYWAYS NO HOLE WAS IN THE BLOCK.

Speedstang302 · September 23rd, 2007, 11:10 PM

Originally Posted by 86ttops

Originally Posted by Speedstang302

Originally Posted by jordan

mine does too

you have a 347 bastard

and wow you guys are duesch bags..leave him alone

learn it, but you learned the best/ worst lesson...called experience..

just rebuilt build it and get back out there...

Good luck rebuilding something with a big ass hole in the side of it lol

dur...i mean rebuild car..like engine or w/e...and if it only a piston or something replaceable than you could rebuild it..

cams-shelbycobra07 · September 23rd, 2007, 11:13 PM

I dont think there is a hole in the block it hasnt been pulled apart yet. I know I threw a rod cause there is a hole in the pan

93'_GT · September 23rd, 2007, 11:21 PM

wow that sucks man,... lets see some pics

cams-shelbycobra07 · September 23rd, 2007, 11:23 PM

yea well this last couple of weeks justs havent been good for me I left the camera in the cobra and its at the dealer getting warranty work

cams-shelbycobra07 · September 23rd, 2007, 11:25 PM

Oh my bad darrel I had a powerglide went to a c-4

superman5.0 · September 24th, 2007, 12:05 AM

dude if your passing out motors ill take an ls1.

gotboost562 · September 24th, 2007, 12:05 AM

Originally Posted by cams-shelbycobra07

Oh my bad darrel I had a powerglide went to a c-4

I see you answered that question. But not the time question?

Drick · September 24th, 2007, 01:10 AM

Originally Posted by gotboost562

Originally Posted by cams-shelbycobra07

Oh my bad darrel I had a powerglide went to a c-4

I see you answered that question. But not the time question?

waiting for a response

cams-shelbycobra07 · September 24th, 2007, 08:17 PM

Idk I didnt get my slip or look I was busy figuring out what happen the past before I did the same thing but didnt go to first and ran 14s

1slo5.0 · September 24th, 2007, 08:21 PM

Originally Posted by 89LX347

i know its off topic but darrel where did you get your valve covers?

Which ones?

Speedstang302 · September 24th, 2007, 08:29 PM

i think those sheetmetal ones on you're sig's what he's talking about..i like those too..

Drick · September 24th, 2007, 08:55 PM

Originally Posted by cams-shelbycobra07

Idk I didnt get my slip or look I was busy figuring out what happen the past before I did the same thing but didnt go to first and ran 14s

14's with that setup I can run high 14's and all I have is 3.73 gears short throw shifter headers and underdrive pulleys

Speedstang302 · September 24th, 2007, 08:59 PM

$9000 built 351w drag car run 14's...i ran 12.86 w/ complete street car with like 260-270rwhp...

Iownastang · September 24th, 2007, 09:02 PM

nice times speedstang

Drick · September 24th, 2007, 09:02 PM

I know thats what im getting at

please explain cam if you had a real manual trans and you were horrible at driving a stick shift I can see that like taking 3 seconds in between shifts but you should be running a hell of alot faster than this

September 23rd, 2007, 11:21 PM	#48
93'_GT Regular Join Date: Mar 2007 Posts: 205 iTrader: 0 reviews	wow that sucks man,... lets see some pics __________________ Stock 5.0 Engine M/T Drag Radials E.T.- 13.859 MPH-97.23 60 foot-1.853

September 24th, 2007, 12:05 AM	#51
superman5.0 Enthusiast 93 GT Hatch 12.68@112.57 Join Date: Jun 2007 Location: Brandon, FL Posts: 536 iTrader: 0 reviews	dude if your passing out motors ill take an ls1. __________________

September 24th, 2007, 08:29 PM	#56
Speedstang302 I Post Entirely Way Too Much 1996 Mustang GT 13.64@101mph Join Date: Apr 2007 Location: Massachusetss Posts: 5,799 iTrader: 1 reviews	i think those sheetmetal ones on you're sig's what he's talking about..i like those too.. __________________ 1990 GT- 5.0L \|BBK Shortys\|VRS O/R X\| SLP LM1 Catback\|BBK CAI\| Centerforce Clutch\|MGW Short Throw\| Alum D/S\| 3.73's\| Steeda Springs...about as stock as a 5.0 comes now a days..much more to come

September 24th, 2007, 08:59 PM	#58
Speedstang302 I Post Entirely Way Too Much 1996 Mustang GT 13.64@101mph Join Date: Apr 2007 Location: Massachusetss Posts: 5,799 iTrader: 1 reviews	$9000 built 351w drag car run 14's...i ran 12.86 w/ complete street car with like 260-270rwhp... __________________ 1990 GT- 5.0L \|BBK Shortys\|VRS O/R X\| SLP LM1 Catback\|BBK CAI\| Centerforce Clutch\|MGW Short Throw\| Alum D/S\| 3.73's\| Steeda Springs...about as stock as a 5.0 comes now a days..much more to come

September 24th, 2007, 09:02 PM	#60
Drick Big timin' in a small town 2004 FX4 F150, 86 GT Join Date: Apr 2007 Location: Gods country. Nordern Michigan eh Posts: 14,365 iTrader: 1 reviews	I know thats what im getting at please explain cam if you had a real manual trans and you were horrible at driving a stick shift I can see that like taking 3 seconds in between shifts but you should be running a hell of alot faster than this __________________ FX4 Crew Crew member #1 Don't take anything I say to heart, I don't try to come off as an asshole. It just happens

September 23rd, 2007, 11:05 PM	#43
cams-shelbycobra07 Enthusiast 1991 LX, 2003 SNK, 2007 S 11.3 Join Date: Dec 2006 Location: Oklahoma City Posts: 955 iTrader: 0 reviews	well it depends what went on how hard it will be to rebuild

September 23rd, 2007, 11:13 PM	#47
cams-shelbycobra07 Enthusiast 1991 LX, 2003 SNK, 2007 S 11.3 Join Date: Dec 2006 Location: Oklahoma City Posts: 955 iTrader: 0 reviews	I dont think there is a hole in the block it hasnt been pulled apart yet. I know I threw a rod cause there is a hole in the pan

September 23rd, 2007, 11:23 PM	#49
cams-shelbycobra07 Enthusiast 1991 LX, 2003 SNK, 2007 S 11.3 Join Date: Dec 2006 Location: Oklahoma City Posts: 955 iTrader: 0 reviews	yea well this last couple of weeks justs havent been good for me I left the camera in the cobra and its at the dealer getting warranty work

September 23rd, 2007, 11:25 PM	#50
cams-shelbycobra07 Enthusiast 1991 LX, 2003 SNK, 2007 S 11.3 Join Date: Dec 2006 Location: Oklahoma City Posts: 955 iTrader: 0 reviews	Oh my bad darrel I had a powerglide went to a c-4

September 24th, 2007, 08:17 PM	#54
cams-shelbycobra07 Enthusiast 1991 LX, 2003 SNK, 2007 S 11.3 Join Date: Dec 2006 Location: Oklahoma City Posts: 955 iTrader: 0 reviews	Idk I didnt get my slip or look I was busy figuring out what happen the past before I did the same thing but didnt go to first and ran 14s

Remove Advertisements Sponsored Links
Forums at Modded Mustangs Advertisement Advertisement

Threads Similar to: I blew the motor
Thread	Thread Starter	Forum	Replies	Last Post
just blew up my shop vac!	JASonic	The Clubhouse	11	October 13th, 2007 10:22 PM
I think I blew out!!!!	Top Gear	Audio/Video	21	September 26th, 2007 04:47 PM
Blew up my engine and need a new one....	99v6stang	V6 Mustangs	45	August 13th, 2007 01:00 PM
Brother blew the motor time for a 351w: questions	MIGHTYJO3YOUNG	5.0 Mustangs	10	January 25th, 2007 04:18 PM
Blew Something	JRubin2000	99-04	11	November 2nd, 2006 08:01 PM

All times are GMT -4. The time now is 02:14 AM.
Contact Us - Modded Mustangs - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.