Pprofessional Products Typhoon 5.0 Intake Manifold?

FaStStAnG5-0 · October 6th, 2007, 08:53 AM

has anyone ever used one on their vehicle or known anyone that has? i'm looking into getting one & i just want to know how they perform. any help on this would be great!

1slo5.0 · October 6th, 2007, 09:02 AM

Support the foreigners!!!!!

They look like Edelbrocks on the outside but have a ton of casting flash on the inside. They make nice door stops.

FaStStAnG5-0 · October 6th, 2007, 09:09 AM

thats what i figured.. at the price i was kind of thinkg the whole "ya get what you pay for thing." i was just curious as to how they performed.. i was also looking at a GT40 or an edelbrock or trick flow.. i want the best bang for my buck & the potential to hold future horsepower..
what do you think would be the best pick Darrell??

1slo5.0 · October 6th, 2007, 09:17 AM

Originally Posted by FaStStAnG5-0

thats what i figured.. at the price i was kind of thinkg the whole "ya get what you pay for thing." i was just curious as to how they performed.. i was also looking at a GT40 or an edelbrock or trick flow.. i want the best bang for my buck & the potential to hold future horsepower..
what do you think would be the best pick Darrell??

Professional Products are overseas rip offs. They ripped off Edelbrock's design. I wouldn't use one of there intakes if someone gave it to me just for that reason. I prefer to support hard working americans.

Edelbrock and Trick Flow both make good intakes. You can't go wrong with either one.

FaStStAnG5-0 · October 6th, 2007, 09:19 AM

thanks for the info man!!!

90 lx conv. · October 16th, 2007, 10:48 PM

I bought the Hurricane intake for the price, big mistake! Got my gaskets , put sealant on them and guess what? The damn thing didn't fit! I had to do some grinding where the injector bosses were for it to fit properly! Thank God i wasn't running fuel injection or i would've been screwed!

TurboLX · October 16th, 2007, 10:57 PM

haha you shoulda seen JBIGBOOSTY's PP intake

OMG....

Speedstang302 · October 17th, 2007, 09:41 AM

jam77 use's one and hasnt mentioned any problems..i have the 93 cobra style GT40 and like it..but i'd take a holley systemax or trick flow over it anyday!!!

TurboLX · October 17th, 2007, 04:08 PM

i think there junk

Speedstang302 · October 18th, 2007, 10:12 PM

Originally Posted by TurboLX

i think there junk

+1 just saying he has them..i like my GT40 but want the systemax or trick flow

TurboLX · November 4th, 2007, 08:30 AM

yea like i said, you should have seen how horrible JBIGBOOSTY's was

Speedstang302 · November 5th, 2007, 08:14 PM

Originally Posted by TurboLX

yea like i said, you should have seen how horrible JBIGBOOSTY's was

i believe ya..

FoxHoss · November 5th, 2007, 09:11 PM

idk i ordered one (i dont know why) but the inside casting wasnt too bad but could use some touching up. otherwise im satisfied with it... even if it does support foreigners, just like everything else in this country is made overseas

1slo5.0 · November 5th, 2007, 09:21 PM

Originally Posted by FoxHoss

idk i ordered one (i dont know why) but the inside casting wasnt too bad but could use some touching up. otherwise im satisfied with it... even if it does support foreigners, just like everything else in this country is made overseas

Sorry but Holley, Trick Flow, Edelbrock, Ford Racing, etc are all made in the U.S.

FoxHoss · November 5th, 2007, 09:38 PM

i know that, i meant stuff like cloths, video games, toys, computers, there is a lot of stuff we buy that is made overseas

Speedstang302 · November 6th, 2007, 09:36 PM

Originally Posted by FoxHoss

idk i ordered one (i dont know why) but the inside casting wasnt too bad but could use some touching up. otherwise im satisfied with it... even if it does support foreigners, just like everything else in this country is made overseas

for the $250 or so you could have gotten a used gt40 or something...for $250 you can prob get a new gt40..

FaStStAnG5-0 · November 9th, 2007, 05:48 AM

i've been looking into the GT40 intake/plenum for my car for a little while. i don't plan on going over 320 or so horsepower anytime soon & for the money the GT40 seems like a good deal for me. besides the throttle body adapter is there any other problems that the GT40 will have fitting onto my stock 94 5.0 motor? & what kind of gains am i looking at on my stock motor? thanks in advance guys!

WAR-PARTY · November 15th, 2007, 05:51 PM

Originally Posted by Darrell

Support the foreigners!!!!!

They look like Edelbrocks on the outside but have a ton of casting flash on the inside. They make nice door stops.

ya they are crap, just fork out the bucks and get a real a Edelbrock, I have been using their products for 30 years.

Speedstang302 · November 19th, 2007, 10:57 PM

Originally Posted by FaStStAnG5-0

i've been looking into the GT40 intake/plenum for my car for a little while. i don't plan on going over 320 or so horsepower anytime soon & for the money the GT40 seems like a good deal for me. besides the throttle body adapter is there any other problems that the GT40 will have fitting onto my stock 94 5.0 motor? & what kind of gains am i looking at on my stock motor? thanks in advance guys!

as long as you get both the upper and lower intake, idk about the slanted EGR thing on sn95s...you may see 15-20hp...better throttle response and with other bolt ons like cam and stuff should make decent #'s...

05mustang_TT_charged · November 21st, 2007, 02:23 AM

i wouldn't buy PP unless you have a NEW dremel and alot of sanding and polishing stones, i did one for a friend and we port matched the upper,lower, and throttlebody to some fel pro gaskets and that took up the weekend, it took maybe 2 1/2 hours to swap the intake and 10+ hours of porting and polishing, the casting is horrible

October 6th, 2007, 08:53 AM	#1
FaStStAnG5-0 Hardcore Enthusiast Join Date: Jul 2006 Location: Mooresville, NC Posts: 1,221 iTrader: 0 reviews	Pprofessional Products Typhoon 5.0 Intake Manifold? has anyone ever used one on their vehicle or known anyone that has? i'm looking into getting one & i just want to know how they perform. any help on this would be great! __________________ http://www.cardomain.com/ride/2461223 1994 GT: MSD 6AL, BBK O/R H-Pipe, Dynomax Race Bullet mufflers, 3:73 rear, Hurst Short Shifter, MAC cold air intake & much more coming soon!

October 6th, 2007, 09:02 AM	#2
1slo5.0 MM Ninjas! 1990 Mustang LX 9.36@143 mph Join Date: Jan 2006 Location: North Fond du Lac, Wisconsin Posts: 11,375 iTrader: 1 reviews	Support the foreigners!!!!! They look like Edelbrocks on the outside but have a ton of casting flash on the inside. They make nice door stops. __________________ My daily driver has 16 cylinders and 4400hp @ 1000 rpm.... ***1988 Mustang GT - Stock....almost

October 6th, 2007, 09:09 AM	#3
FaStStAnG5-0 Hardcore Enthusiast Join Date: Jul 2006 Location: Mooresville, NC Posts: 1,221 iTrader: 0 reviews	thats what i figured.. at the price i was kind of thinkg the whole "ya get what you pay for thing." i was just curious as to how they performed.. i was also looking at a GT40 or an edelbrock or trick flow.. i want the best bang for my buck & the potential to hold future horsepower.. what do you think would be the best pick Darrell?? __________________ http://www.cardomain.com/ride/2461223 1994 GT: MSD 6AL, BBK O/R H-Pipe, Dynomax Race Bullet mufflers, 3:73 rear, Hurst Short Shifter, MAC cold air intake & much more coming soon!

October 6th, 2007, 09:19 AM	#5
FaStStAnG5-0 Hardcore Enthusiast Join Date: Jul 2006 Location: Mooresville, NC Posts: 1,221 iTrader: 0 reviews	thanks for the info man!!! __________________ http://www.cardomain.com/ride/2461223 1994 GT: MSD 6AL, BBK O/R H-Pipe, Dynomax Race Bullet mufflers, 3:73 rear, Hurst Short Shifter, MAC cold air intake & much more coming soon!

October 16th, 2007, 10:57 PM	#7
TurboLX I Post Entirely Way Too Much 1988 Mustang LX Turbo Join Date: Oct 2006 Location: NY Posts: 8,778 Blog Entries: 1 iTrader: 0 reviews	haha you shoulda seen JBIGBOOSTY's PP intake OMG.... __________________ 1988 LX Coupe 2.5L, GT35R, 44mm WG, 32psi, C16.

October 16th, 2007, 10:48 PM	#6
90 lx conv. Newbie Join Date: Oct 2007 Posts: 8 iTrader: 0 reviews	I bought the Hurricane intake for the price, big mistake! Got my gaskets , put sealant on them and guess what? The damn thing didn't fit! I had to do some grinding where the injector bosses were for it to fit properly! Thank God i wasn't running fuel injection or i would've been screwed!

October 17th, 2007, 09:41 AM	#8
Speedstang302 I Post Entirely Way Too Much 1996 Mustang GT 13.64@101mph Join Date: Apr 2007 Location: Massachusetss Posts: 5,828 iTrader: 1 reviews	jam77 use's one and hasnt mentioned any problems..i have the 93 cobra style GT40 and like it..but i'd take a holley systemax or trick flow over it anyday!!! __________________ 1990 GT- GT40p Heads\| Anderson N41 cam\| Crane 1.6 RR's\| Trickflow Intake\|MGW Short Throw\| Aluminum d/s\| 3.73's.....still slow....

October 17th, 2007, 04:08 PM	#9
TurboLX I Post Entirely Way Too Much 1988 Mustang LX Turbo Join Date: Oct 2006 Location: NY Posts: 8,778 Blog Entries: 1 iTrader: 0 reviews	i think there junk __________________ 1988 LX Coupe 2.5L, GT35R, 44mm WG, 32psi, C16.

November 4th, 2007, 08:30 AM	#11
TurboLX I Post Entirely Way Too Much 1988 Mustang LX Turbo Join Date: Oct 2006 Location: NY Posts: 8,778 Blog Entries: 1 iTrader: 0 reviews	yea like i said, you should have seen how horrible JBIGBOOSTY's was __________________ 1988 LX Coupe 2.5L, GT35R, 44mm WG, 32psi, C16.

November 5th, 2007, 09:11 PM	#13
FoxHoss Enthusiast 02' GT Join Date: Oct 2007 Location: Brooklyn, CT Posts: 907 iTrader: 0 reviews	idk i ordered one (i dont know why) but the inside casting wasnt too bad but could use some touching up. otherwise im satisfied with it... even if it does support foreigners, just like everything else in this country is made overseas __________________ Nitrous is like a hot girl with an STD... you wanna hit it, but your afraid of the consequences 02' GT ~ Twin Screwed 469hp/493tq

November 5th, 2007, 09:38 PM	#15
FoxHoss Enthusiast 02' GT Join Date: Oct 2007 Location: Brooklyn, CT Posts: 907 iTrader: 0 reviews	i know that, i meant stuff like cloths, video games, toys, computers, there is a lot of stuff we buy that is made overseas __________________ Nitrous is like a hot girl with an STD... you wanna hit it, but your afraid of the consequences 02' GT ~ Twin Screwed 469hp/493tq

November 9th, 2007, 05:48 AM	#17
FaStStAnG5-0 Hardcore Enthusiast Join Date: Jul 2006 Location: Mooresville, NC Posts: 1,221 iTrader: 0 reviews	i've been looking into the GT40 intake/plenum for my car for a little while. i don't plan on going over 320 or so horsepower anytime soon & for the money the GT40 seems like a good deal for me. besides the throttle body adapter is there any other problems that the GT40 will have fitting onto my stock 94 5.0 motor? & what kind of gains am i looking at on my stock motor? thanks in advance guys! __________________ http://www.cardomain.com/ride/2461223 1994 GT: MSD 6AL, BBK O/R H-Pipe, Dynomax Race Bullet mufflers, 3:73 rear, Hurst Short Shifter, MAC cold air intake & much more coming soon!

November 21st, 2007, 02:23 AM	#20
05mustang_TT_charged Hardcore Enthusiast 2005 Mustang GT 10.32@137.70 Join Date: Mar 2007 Location: LSU Country Posts: 2,774 iTrader: 0 reviews	i wouldn't buy PP unless you have a NEW dremel and alot of sanding and polishing stones, i did one for a friend and we port matched the upper,lower, and throttlebody to some fel pro gaskets and that took up the weekend, it took maybe 2 1/2 hours to swap the intake and 10+ hours of porting and polishing, the casting is horrible __________________ 350 rwhp and 310 rwtq at 6000 rpms through stock exhaust system 326 cubic inches of Twin Turbocharged hell will be running soon Tuned by Wes @ TPS

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

Threads Similar to: Pprofessional Products Typhoon 5.0 Intake Manifold?
Thread	Thread Starter	Forum	Replies	Last Post
typhoon intake?	4.6gtmarine	99-04	5	February 20th, 2007 09:56 PM
typhoon intake manifold	slow98gt	96-98	9	February 13th, 2007 11:35 AM
Typhoon Intake	DragonFreak	99-04	72	November 29th, 2006 07:07 AM
Professional Products Typhoon Intake	Drgnracin72	99-04	3	November 12th, 2006 08:35 AM
Typhoon Intake	ayyubam2002	General Tech	1	August 6th, 2006 03:21 PM

All times are GMT -4. The time now is 02:43 AM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.