[BWAL]

i might get a NOS kit for christmas, and i was reading this

http://static.summitracing.com/globa...-199r10329.pdf

and it says for use with a holley systemax intake manifold or something.. is that some type of marketing ploy to get me to buy the intake manifold, or is it required?

[ryans88gt]

No, the plate kit is designed to fit between the upper and lower intake. You have to get the kit that is designed for your intake or it isn't going to fit. They make them for Trick flow, Holley, edelbrock performer, GT-40, and stock...

[BWAL]

Originally Posted by ryans88gt No, the plate kit is designed to fit between the upper and lower intake. You have to get the kit that is designed for your intake or it isn't going to fit. They make them for Trick flow, Holley, edelbrock performer, GT-40, and stock...

ok, so let me ask this: will this kit here

http://store.summitracing.com/partde...5&autoview=sku

fit on my stock engine? if it doesn't, can you direct me towards another NOS wet kit that will?

[Speedstang302]

how much is it to fill an nitrous tank??

[BWAL]

im not sure.. my dad's best friend can give me free refills though

what do i need to make that kit work with a bone stock mustang?

[1slo5.0]

Originally Posted by Speedstang302 how much is it to fill an nitrous tank??

Anywhere from $20 to $50 to fill a 10lb bottle depending on your location.

[ryans88gt]

It depends on how empty the bottle is, I've always been charged by the pound.

$3.50 per pound is the cheapest I've found

Some tracks charge as much as $7 a pound

[ryans88gt]

Originally Posted by BWAL09 Originally Posted by ryans88gt No, the plate kit is designed to fit between the upper and lower intake. You have to get the kit that is designed for your intake or it isn't going to fit. They make them for Trick flow, Holley, edelbrock performer, GT-40, and stock... ok, so let me ask this: will this kit here http://store.summitracing.com/partde...5&autoview=sku fit on my stock engine? if it doesn't, can you direct me towards another NOS wet kit that will?

I believe that is the correct part for a stock intake. You can check with NOS website, the part numbers should cross over.

[BWAL]

Originally Posted by ryans88gt Originally Posted by BWAL09 Originally Posted by ryans88gt No, the plate kit is designed to fit between the upper and lower intake. You have to get the kit that is designed for your intake or it isn't going to fit. They make them for Trick flow, Holley, edelbrock performer, GT-40, and stock... ok, so let me ask this: will this kit here http://store.summitracing.com/partde...5&autoview=sku fit on my stock engine? if it doesn't, can you direct me towards another NOS wet kit that will? I believe that is the correct part for a stock intake. You can check with NOS website, the part numbers should cross over.

cool beans. thanks man

[Iownastang]

why do you want a big shot kit for a stock 5.0

[BWAL]

Originally Posted by jordan why do you want a big shot kit for a stock 5.0

cause i plan on going to the track pretty frequently and a 150 shot would be great i think.. plus, when i start to build my engine, the wet kit gives me room to throw a bigger shot at it down the road

[Iownastang]

Originally Posted by BWAL09 Originally Posted by jordan why do you want a big shot kit for a stock 5.0 cause i plan on going to the track pretty frequently and a 150 shot would be great i think.. plus, when i start to build my engine, the wet kit gives me room to throw a bigger shot at it down the road

got it

[1slo5.0]

Originally Posted by ryans88gt It depends on how empty the bottle is, I've always been charged by the pound. $3.50 per pound is the cheapest I've found Some tracks charge as much as $7 a pound

That is why I said for a 10lb bottle. Everywhere charges by the pound. You can buy it in a 64lb mother bottle for $1.75 a pound pretty much anywhere. But if you don't have a refill station you are at the mercy of the people that do have them.

[Iownastang]

Originally Posted by Darrell Originally Posted by ryans88gt It depends on how empty the bottle is, I've always been charged by the pound. $3.50 per pound is the cheapest I've found Some tracks charge as much as $7 a pound That is why I said for a 10lb bottle. Everywhere charges by the pound. You can buy it in a 64lb mother bottle for $1.75 a pound pretty much anywhere. But if you don't have a refill station you are at the mercy of the people that do have them.

My dad runs a-welders and medical supplies and i can get nitrous for hardly anything

[ryans88gt]

sweet, I'll send my empty bottles your way and you just send them back full OK??

[BWAL]

Originally Posted by jordan Originally Posted by Darrell Originally Posted by ryans88gt It depends on how empty the bottle is, I've always been charged by the pound. $3.50 per pound is the cheapest I've found Some tracks charge as much as $7 a pound That is why I said for a 10lb bottle. Everywhere charges by the pound. You can buy it in a 64lb mother bottle for $1.75 a pound pretty much anywhere. But if you don't have a refill station you are at the mercy of the people that do have them. My dad runs a-welders and medical supplies and i can get nitrous for hardly anything

you know medical nitrous is different from automotive nitrous, right?

[BWAL]

Originally Posted by ryans88gt sweet, I'll send my empty bottles your way and you just send them back full OK??

lol.. i dont know about that, man.. i could have them filled for you, but i might need a little bit of money for it

[Iownastang]

Originally Posted by BWAL09 Originally Posted by jordan Originally Posted by Darrell Originally Posted by ryans88gt It depends on how empty the bottle is, I've always been charged by the pound. $3.50 per pound is the cheapest I've found Some tracks charge as much as $7 a pound That is why I said for a 10lb bottle. Everywhere charges by the pound. You can buy it in a 64lb mother bottle for $1.75 a pound pretty much anywhere. But if you don't have a refill station you are at the mercy of the people that do have them. My dad runs a-welders and medical supplies and i can get nitrous for hardly anything you know medical nitrous is different from automotive nitrous, right?

He sells tech grade nitrous to all the speed shops in the area,and yes i know.

[BWAL]

Originally Posted by jordan Originally Posted by BWAL09 Originally Posted by jordan Originally Posted by Darrell Originally Posted by ryans88gt It depends on how empty the bottle is, I've always been charged by the pound. $3.50 per pound is the cheapest I've found Some tracks charge as much as $7 a pound That is why I said for a 10lb bottle. Everywhere charges by the pound. You can buy it in a 64lb mother bottle for $1.75 a pound pretty much anywhere. But if you don't have a refill station you are at the mercy of the people that do have them. My dad runs a-welders and medical supplies and i can get nitrous for hardly anything you know medical nitrous is different from automotive nitrous, right? He sells tech grade nitrous to all the speed shops in the area,and yes i know.

lol.. just making sure

[Iownastang]

I know