[BWAL]

unless you're an EXTREMELY good driver, i don't think you could hit 12's with 286rwhp

[JONJON]

really well I guess I will see wensday,I will post a video when I run it.

[Drick]

Yeah that will be close problly low 13's

[JONJON]

That was also before some stuff I added to my car.It is being dynoed tomorrow it is at the shop right now getting it dyno tuned for wensday.I will post what power I make and what I end up running.

[Speedstang302]

Originally Posted by BWAL09 unless you're an EXTREMELY good driver, i don't think you could hit 12's with 286rwhp

my buddy who ran mine is extremly good driver and ran mine to 12.86 w/ about 300 to the crank..

[Speedstang302]

Originally Posted by JONJON Speedstang thats about right I am going with a dart block 347 of coarse.The heads will have titanium retainer either 2.05 int valve and 1.60 exh or 1.94 and 1.60 the heads are either brodix or dart.the heads alone are running over 5,000 with everything.Yea the car is going to get a 8 or 10 point roll bar with full suspension.This is a nice project this is not an overnight thing I am about to get the dart block like in 2 or 3 weeks.I just have to get my aluminum radiator,elec. fan,and 4.10 gears for my current project.I will be working on two projects at a time because my current 88 needs stuff also.

well to run in the 8/9s you'll need bigger than 2.05 intake..i completely forgot about brodix, they make good stuff too..

[Speedstang302]

Originally Posted by JONJON LOL I know he was right it was a stupid ? when I look back because I didnt give enough info.I think with the 347 no nos I can make about 400 rwhp then dual stage 500 hp set up mabey 400 dual stage.Thanks about 1200 or so hp give or take.With the right suspension and I mean one hell of a suspension transmission etc.I can go high 8's once I get the hang of a car of that power.So it is anyones call on HP.I apologize stangzilla but you should not have said a kid with a dream I am a man on a mission.LOL

well tell you the truth, with a 347, aluminum heads completely worked w/ high end parts, custom grind cam, and everything little thing being top of the line parts...you'll make over 500hp to the wheels..then shoot it with a couple stages..