Would You Buy This Notch?

baine21225 · December 15th, 2007, 01:09 PM

seeing those pics i would go no higher than 500 bucks, and is he says no be like bro, your still making 100

**Chris** · December 15th, 2007, 09:03 PM

Originally Posted by Tony....the guys who sold it to the guy in Miami

damn my shit is in m.i.a now for a grand..lol i sold it for 550$

I told him about this thread.

Suicidal Racing · December 16th, 2007, 12:25 AM

yes that is my old car in fact that is a pic i took of it in my parking lot

car was going to get a lsx engine and a th-400 trans..i sold a 8.8 and cowl hood with the chassis also..

the light harness's was the only things i left in the car seeing i was going to re wire it.

whole goal of that car was to be 2400#s with out me in it and was going to get a 650hp engine in it n/a and then juice.

guy i sold it to lived over by palm beach.

for the inside it was all tan..dash i spray painted black and the fire wall..i gave him all the other plastic for the inside pretty much.

body is straight

95StangMX · December 16th, 2007, 01:31 AM

Originally Posted by blackvertgt

Check out those hubcaps, looks like she used to be FHP (Florida Highway Patrol). That means heavier springs, larger radiator, etc. I'd grab it.

look at chris's pics and rethink that comment it looks like on black wheel, one spare, one late 80's wheel, and one pony wheel...from the wheel side I would not know where to start to say what it was.....lol...and no fhp catching me in that one...just kidding doesnt seem like too bad if you got the time but might be cheaper in the end to find an 8 that is a little rougher and spend a little on paint and interior and not have to convert everything....tell us what happens bro

Suicidal Racing · December 16th, 2007, 11:53 AM

car was a 4banger stick car.

the rims are all 4 banger stock rims on it..it came with the mix matched rims.i got the ponys,the 4 bangers sets with the car.

car has surface rust in the trunk where the spare gos..easy fix..its a good drag car project..seeing i alredy stripped it.i was ready to start rebuilding when my house got robbed..if that didn't happen the car would of been just getting finshed around this time

bob · December 18th, 2007, 08:02 PM

Offer him $500 You can find one running 4cyl For a grand

Jeimuzu · December 18th, 2007, 08:19 PM

My brother got a running 2.3 with almost perfect interior for $500...that was an awesome deal, but still

Jakashh · December 18th, 2007, 08:52 PM

What engine does it have?

**Chris** · December 18th, 2007, 08:58 PM

No engine... and welcome to MM Jakashh..... Streetfire isn't keeping you occupied anymore?

Chris951 · December 18th, 2007, 10:15 PM

go for it

JONJON · December 18th, 2007, 10:38 PM

yea it is in palm beach I am in Miami,he changed the interior to black now and I will be offering him like 650 or because of the new interior he put in.

**Chris** · December 18th, 2007, 11:30 PM

Plan on painting it as soon as possible...lol

Jakashh · December 18th, 2007, 11:39 PM

Originally Posted by **Chris**

No engine... and welcome to MM Jakashh..... Streetfire isn't keeping you occupied anymore?

Haha. Nice

Was i perma'd or just tempo'd?

I didn't get a Vbulletin pop up telling me anything.

**Chris** · December 19th, 2007, 02:34 PM

Originally Posted by Jakashh

Haha. Nice

Was i perma'd or just tempo'd?

I didn't get a Vbulletin pop up telling me anything.

I'm not sure, I'll ask. I'll let you know.

**Chris** · December 19th, 2007, 02:38 PM

Originally Posted by Jakashh

Was i perma'd or just tempo'd?

Temporary... one week from yesterday.

Jakashh · December 19th, 2007, 02:48 PM

Meh. I think I'm hated there

But in my defense, he started it.

December 18th, 2007, 08:52 PM	#48
Jakashh The Awesome Possum 2001 Mustang GT same ol same ol Join Date: Dec 2007 Location: Sugar Land, TX Posts: 1,736	What engine does it have? __________________ Bassani O/R X-pipe, Flowmaster mufflers, K&N FIPK, summit UDP's, 4.10's, SCT tuner, eibach pro kit 1.5" springs, eibach pro dampers, MM C/C plates, MM LCA's, 315/17/35 nitto radials, HiTech Stage 2 cams and comp valve springs (awaiting install)

December 18th, 2007, 08:58 PM	#49
Chris Regular 1989 LX Coupe Join Date: Oct 2007 Location: St. Pete, Fl Posts: 377	No engine... and welcome to MM Jakashh..... Streetfire isn't keeping you occupied anymore? __________________ 7.87 @ 93 mph http://www.youtube.com/watch?v=ZwEEQUYY8gA

December 18th, 2007, 10:38 PM	#51
JONJON Regular 1988 Ford Mustang GT 8.372@82.8 1/8mile w/1.825 60' Join Date: Sep 2007 Location: Miami,FL Posts: 357	yea it is in palm beach I am in Miami,he changed the interior to black now and I will be offering him like 650 or because of the new interior he put in. __________________ I never thought I would own a mustang!!!

December 18th, 2007, 11:30 PM	#52
Chris Regular 1989 LX Coupe Join Date: Oct 2007 Location: St. Pete, Fl Posts: 377	Plan on painting it as soon as possible...lol __________________ 7.87 @ 93 mph http://www.youtube.com/watch?v=ZwEEQUYY8gA

December 19th, 2007, 02:48 PM	#56
Jakashh The Awesome Possum 2001 Mustang GT same ol same ol Join Date: Dec 2007 Location: Sugar Land, TX Posts: 1,736	Meh. I think I'm hated there But in my defense, he started it. __________________ Bassani O/R X-pipe, Flowmaster mufflers, K&N FIPK, summit UDP's, 4.10's, SCT tuner, eibach pro kit 1.5" springs, eibach pro dampers, MM C/C plates, MM LCA's, 315/17/35 nitto radials, HiTech Stage 2 cams and comp valve springs (awaiting install) Last edited by Jakashh : December 19th, 2007 at 02:56 PM.

December 15th, 2007, 01:09 PM	#41
baine21225 MM Fanatic Join Date: Jun 2007 Location: Baltimore, MD Posts: 3,920	seeing those pics i would go no higher than 500 bucks, and is he says no be like bro, your still making 100

Sponsored Links	Remove Advertisements
Forums at Modded Mustangs Advertisement

December 16th, 2007, 12:25 AM	#43
Suicidal Racing Newbie Join Date: Dec 2007 Posts: 2	yes that is my old car in fact that is a pic i took of it in my parking lot car was going to get a lsx engine and a th-400 trans..i sold a 8.8 and cowl hood with the chassis also.. the light harness's was the only things i left in the car seeing i was going to re wire it. whole goal of that car was to be 2400#s with out me in it and was going to get a 650hp engine in it n/a and then juice. guy i sold it to lived over by palm beach. for the inside it was all tan..dash i spray painted black and the fire wall..i gave him all the other plastic for the inside pretty much. body is straight

December 16th, 2007, 11:53 AM	#45
Suicidal Racing Newbie Join Date: Dec 2007 Posts: 2	car was a 4banger stick car. the rims are all 4 banger stock rims on it..it came with the mix matched rims.i got the ponys,the 4 bangers sets with the car. car has surface rust in the trunk where the spare gos..easy fix..its a good drag car project..seeing i alredy stripped it.i was ready to start rebuilding when my house got robbed..if that didn't happen the car would of been just getting finshed around this time

December 18th, 2007, 08:02 PM	#46
bob Newbie Join Date: Oct 2006 Posts: 38	Offer him $500 You can find one running 4cyl For a grand

December 18th, 2007, 08:19 PM	#47
Jeimuzu Regular Join Date: Oct 2007 Posts: 129	My brother got a running 2.3 with almost perfect interior for $500...that was an awesome deal, but still

December 18th, 2007, 10:15 PM	#50
Chris951 Hardcore Enthusiast 1988 T-top 5.0 Join Date: Aug 2007 Location: Mesa, AZ Posts: 1,395	go for it

Threads Similar to: Would You Buy This Notch?
Thread	Thread Starter	Forum	Replies	Last Post
Best looking notch	White Thunder	5.0 Mustangs	42	December 18th, 2008 06:02 PM
Anyone Looking For A Bad Ass Notch? 5k	e3sean	5.0 Mustangs	21	December 13th, 2007 02:58 PM
87-93 Notch 4 cyl	90Stang	2.3 Mustangs	1	January 30th, 2007 04:51 PM
Need a notch.	Timothy_j	5.0 Mustangs	0	January 26th, 2007 04:52 AM
FS: 87 Notch	68 dlxcoupe	For Sale	5	September 22nd, 2006 03:07 PM

All times are GMT -4. The time now is 12:20 AM.
Contact Us - Modded Mustangs - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2009, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.