Brake Lights

Speedstang302 · February 18th, 2008, 02:51 PM

ok well i thought my brake light bulbs were bad so i bought all new brakes light bulbs..and that didnt fix it, so i looked under the dash and the stop light switch was missing, so i bought that, and went to install and apparently the duesch before me cuz the connector off and rigged something. anyone know where i can order this or anyone have one?

black88 · February 18th, 2008, 03:41 PM

RJM Injection Tech » EFI Harness Pigtails:
I think you are looking for this

Speedstang302 · February 18th, 2008, 03:53 PM

yeah i think it is..thanks bro

black88 · February 18th, 2008, 03:54 PM

No problemo

Racinjason81 · February 18th, 2008, 07:32 PM

you could go to your local ford dealer cuz they sell motorcraft pigtails for almost every EFI ford

Speedstang302 · February 18th, 2008, 07:59 PM

Originally Posted by Racinjason81

you could go to your local ford dealer cuz they sell motorcraft pigtails for almost every EFI ford

i could but ford dealers charge way to much...

Iwannagofast · February 19th, 2008, 12:20 AM

Originally Posted by Speedstang302

i could but ford dealers charge way to much...

thats not joke.....they are damn proud of their stuff

Speedstang302 · February 19th, 2008, 11:15 AM

Originally Posted by Iwannagofast

thats not joke.....they are damn proud of their stuff

a little to much..i paid $140 for new doors locks and keys for them on my stang, $60 for the hatch lock and $75 for the ignition cylinder...i'll never go that route again..its nice to have new stuff but i could have stole them from a used stang..

fogged306 · February 19th, 2008, 12:38 PM

You should be able to use two female spades if it is the 2 wire setup. If I remember right, fords use t male spades sricking out of the brake switch, it really doesn't matter which wire goes where... if it is the 2 wire setup. Just make sure the connectors are insulated and save yourself the dough.

Speedstang302 · February 19th, 2008, 04:06 PM

Originally Posted by fogged306

You should be able to use two female spades if it is the 2 wire setup. If I remember right, fords use t male spades sricking out of the brake switch, it really doesn't matter which wire goes where... if it is the 2 wire setup. Just make sure the connectors are insulated and save yourself the dough.

that helps..but the parts $8.99...so i'll do it the right way..but seriously thanks i'll look into that if i cant afford the $8.99

fogged306 · February 19th, 2008, 04:25 PM

Haha, I didn't look to see what the part costs, yea that might break the bank.

Speedstang302 · February 19th, 2008, 04:49 PM

im poor dude what do you expect..

tehdwarvenn · February 19th, 2008, 06:35 PM

i expect you to walk in there with 10 bucks, and come back out with 5. :-) Negotiate FTW. (cough offer the guy a ride in the car)

Speedstang302 · February 20th, 2008, 11:06 AM

yeah whats the point he'll be like WTF it cant spin tire in 1st but it will get sideways in 2nd, chirp into 3rd and chirp into 4th...HAHAHA

but idk if any local place has this..thats why im just gunna spend the $8.99 and buy that one of the link black88 gave me

February 18th, 2008, 02:51 PM	#1
Speedstang302 I Post Entirely Way Too Much 1996 Mustang GT 13.64@101mph Join Date: Apr 2007 Location: Massachusetss Posts: 5,799 iTrader: 1 reviews	Brake Lights ok well i thought my brake light bulbs were bad so i bought all new brakes light bulbs..and that didnt fix it, so i looked under the dash and the stop light switch was missing, so i bought that, and went to install and apparently the duesch before me cuz the connector off and rigged something. anyone know where i can order this or anyone have one? __________________ 1990 GT- 5.0L \|BBK Shortys\|VRS O/R X\| SLP LM1 Catback\|BBK CAI\| Centerforce Clutch\|MGW Short Throw\| Alum D/S\| 3.73's\| Steeda Springs...about as stock as a 5.0 comes now a days..much more to come

February 18th, 2008, 03:53 PM	#3
Speedstang302 I Post Entirely Way Too Much 1996 Mustang GT 13.64@101mph Join Date: Apr 2007 Location: Massachusetss Posts: 5,799 iTrader: 1 reviews	yeah i think it is..thanks bro __________________ 1990 GT- 5.0L \|BBK Shortys\|VRS O/R X\| SLP LM1 Catback\|BBK CAI\| Centerforce Clutch\|MGW Short Throw\| Alum D/S\| 3.73's\| Steeda Springs...about as stock as a 5.0 comes now a days..much more to come

February 18th, 2008, 07:32 PM	#5
Racinjason81 Hardcore Enthusiast Join Date: Feb 2007 Location: New jersey Posts: 1,559 iTrader: 0 reviews	you could go to your local ford dealer cuz they sell motorcraft pigtails for almost every EFI ford __________________ Heres a real funny video youtube.com/watch?v=ojB7KkaR03I VTEC stands for Very Torqueless Economy Car Honda stands for Hold On Not Done Accelerating 1991 LX 5.0 H/B(T-70 turbo coming soon)

February 19th, 2008, 04:49 PM	#12
Speedstang302 I Post Entirely Way Too Much 1996 Mustang GT 13.64@101mph Join Date: Apr 2007 Location: Massachusetss Posts: 5,799 iTrader: 1 reviews	im poor dude what do you expect.. __________________ 1990 GT- 5.0L \|BBK Shortys\|VRS O/R X\| SLP LM1 Catback\|BBK CAI\| Centerforce Clutch\|MGW Short Throw\| Alum D/S\| 3.73's\| Steeda Springs...about as stock as a 5.0 comes now a days..much more to come

February 19th, 2008, 06:35 PM	#13
tehdwarvenn Regular Join Date: May 2007 Location: Columbia SC Posts: 301 iTrader: 0 reviews	i expect you to walk in there with 10 bucks, and come back out with 5. :-) Negotiate FTW. (cough offer the guy a ride in the car) __________________ 1993 Mustang GT, catless h-pipe, bbk shorties, 40 series flows, bbk rear suspension, edelbrock front suspension, AUTOLITES!!! =), k&n, underdrives, 3.73's

February 18th, 2008, 03:41 PM	#2
black88 Regular 1988 Mustang GT Hatch Join Date: Sep 2007 Location: Queens,NY Posts: 133 iTrader: 0 reviews	RJM Injection Tech » EFI Harness Pigtails: I think you are looking for this

February 18th, 2008, 03:54 PM	#4
black88 Regular 1988 Mustang GT Hatch Join Date: Sep 2007 Location: Queens,NY Posts: 133 iTrader: 0 reviews	No problemo

February 19th, 2008, 12:38 PM	#9
fogged306 MM Fanatic 89 GT Join Date: Apr 2007 Location: NY Posts: 4,666 iTrader: 1 reviews	You should be able to use two female spades if it is the 2 wire setup. If I remember right, fords use t male spades sricking out of the brake switch, it really doesn't matter which wire goes where... if it is the 2 wire setup. Just make sure the connectors are insulated and save yourself the dough.

February 19th, 2008, 04:25 PM	#11
fogged306 MM Fanatic 89 GT Join Date: Apr 2007 Location: NY Posts: 4,666 iTrader: 1 reviews	Haha, I didn't look to see what the part costs, yea that might break the bank.

February 20th, 2008, 11:06 AM	#14
Speedstang302 I Post Entirely Way Too Much 1996 Mustang GT 13.64@101mph Join Date: Apr 2007 Location: Massachusetss Posts: 5,799 iTrader: 1 reviews	yeah whats the point he'll be like WTF it cant spin tire in 1st but it will get sideways in 2nd, chirp into 3rd and chirp into 4th...HAHAHA but idk if any local place has this..thats why im just gunna spend the $8.99 and buy that one of the link black88 gave me __________________ 1990 GT- 5.0L \|BBK Shortys\|VRS O/R X\| SLP LM1 Catback\|BBK CAI\| Centerforce Clutch\|MGW Short Throw\| Alum D/S\| 3.73's\| Steeda Springs...about as stock as a 5.0 comes now a days..much more to come

Remove Advertisements Sponsored Links
Forums at Modded Mustangs Advertisement Advertisement

Threads Similar to: Brake Lights
Thread	Thread Starter	Forum	Replies	Last Post
Brake lights	Mustangpower	Audio/Video	7	October 16th, 2008 06:46 PM
Emergency Brake Light and Backup lights-help!!	Bullitt8323	Audio/Video	0	November 16th, 2007 02:44 AM
brake lights aren't working!	96DropTop	General Tech	10	April 8th, 2007 05:15 PM
Brake Lights	FunNquick	5.0 Mustangs	1	August 15th, 2006 02:36 AM
Electrical Problems, no hazards and no brake lights..PLS HLP	FunNquick	5.0 Mustangs	2	August 14th, 2006 10:50 AM

All times are GMT -4. The time now is 10:01 PM.
Contact Us - Modded Mustangs - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.