[tvc2389]

aright thanx for the info darrell

[87 5.0]

Originally Posted by Speedstang302 spend another two hundred or so and get some cast iron dart heads..

huh show me where you can get a set of dart heads for 700!!

[e3sean]

Originally Posted by 93hatch ask sean, hes got a 347 stroker with the gt40p heads being built now, i know its a trickflow stage 2 but for the specs just pm him

sorry i didnt see this post till now... yeah i am running a 347 stroker with ross racing flattop pistons with single valve reliefs for twisted wedge heads(which i will be getting in a month or two!!)but as of now i have gt40 p heads ported/polished with a 5 angle valve job and i was there yesterday when they did the PtV clearence and i could have went bigger but i got a trickflow stage 2 cause it was very close to what i needed for a coustom grind and i saved over $100 here are the specs

intake @ cam 340 @valve 542
exhaust @ cam 352 @ valve 563
duration intake 227
duration exhaust 233

[Speedstang302]

Originally Posted by 87 5.0 huh show me where you can get a set of dart heads for 700!!

meant to say world products. like the windsor sr or jr's

[87 5.0]

Originally Posted by Speedstang302 meant to say world products. like the windsor sr or jr's

well they are still a little over 1000 dollars.

[Speedstang302]

Originally Posted by 87 5.0 well they are still a little over 1000 dollars.

no 1.94'' windsor jr w/out spring upgrade are roughly $800. with upgrade are like $950. i'd get the $800 ones and buy .600'' lift double valve springs from comp cams for $100

[Speedstang302]

non-upgraded springs:
http://store.summitracing.com/partde...5&autoview=sku

upgraded springs:
World Products 053030-2 - World Products Windsor Jr Cylinder Heads - summitracing.com