when I do a ac and smog delet.......

91cobra5.0 · February 25th, 2008, 12:58 PM

What all has to be done? Can I just pull them off and get a smaller belt?

kuskye25 · February 25th, 2008, 01:25 PM

well the smog pump you can just pull and use a smaller belt, as for the ac id use the PS relocation kit, brings ps pump to where ac pump is almost its $50, if you jsut google ac delete kit youll find it

mustangfan1990 · February 25th, 2008, 04:32 PM

50resto has one for 40

ThreeHonks302 · February 25th, 2008, 04:45 PM

to add to his question... I already have an o/r h-pipe so my cats wont clog, but what ports will i need to block off and can i just take the egr spacer off, or is there more of an importance to it more than emissions? Thanks!!!

mustangfan1990 · February 25th, 2008, 04:53 PM

well there is a ports in the back of your heads that a bolt will screw into to block off. But if your state is strict on emissions then I would keep it with what they say. My state is strict but I have friends in the inspections business so I have a loop hole to slip by

ThreeHonks302 · February 25th, 2008, 04:55 PM

my state (Michigan) doesnt seem strict at all. So is this the only port with vacuum that I should be worried about or are there more on the EGR spacer?

mustangfan1990 · February 25th, 2008, 05:12 PM

well the port on the back of the heads arent vacuums. Exhaust comes out of the back of the head. I am not sure about the EGR spacer I dont have one on mine b/c I am running a BBK SSI intake and the intake comes with a place t omount the EGR

ThreeHonks302 · February 25th, 2008, 05:15 PM

ok so what is the purpose of the EGR if i dont im not goin to run the smog pump?

mustangfan1990 · February 25th, 2008, 05:23 PM

there isnt a reason except to block off the hole unless you take off teh EGR spacer

jam77 · February 25th, 2008, 05:37 PM

I have the ps relocation kit and it's pretty sweet, I also have the smog pump eliminator which I bought from summit I can't remember the brand again worked perfectly. As far as the egr I run a block off plate and alot of people will say that you will have problems after eliminating it which is b.s. I have had no issues, it will throw a egr code.

mustangfan1990 · February 25th, 2008, 05:39 PM

Originally Posted by jam77

I have the ps relocation kit and it's pretty sweet, I also have the smog pump eliminator which I bought from summit I can't remember the brand again worked perfectly. As far as the egr I run a block off plate and alot of people will say that you will have problems after eliminating it which is b.s. I have had no issues, it will throw a egr code.

I have had NO PROBLEM out of not running a EGR

jam77 · February 25th, 2008, 05:53 PM

yeah thats what I was saying but if you check your codes you should have a code pop up for egr. Unless you have one of those eliminators plugged into the harness.

Iwannagofast · February 25th, 2008, 06:11 PM

Trick Flow Specialties TFS-51400265 - Trick Flow Small Block Ford Thermactor Plugs - summitracing.com

you can use these plugs for when you remove the smog stuff

February 25th, 2008, 12:58 PM	#1
91cobra5.0 Hardcore Enthusiast 98 Cobra Join Date: Jan 2008 Location: Bay Area, Ca Posts: 2,057 iTrader: 0 reviews	when I do a ac and smog delet....... What all has to be done? Can I just pull them off and get a smaller belt?

February 25th, 2008, 01:25 PM	#2
kuskye25 Regular Join Date: Dec 2007 Posts: 371 iTrader: 0 reviews	well the smog pump you can just pull and use a smaller belt, as for the ac id use the PS relocation kit, brings ps pump to where ac pump is almost its $50, if you jsut google ac delete kit youll find it __________________ '88 Mustang GT, Long Tube Headers, Off Road H-pipe, Flowmasters w/turn downs, K&N, Under Drive Pullies, Smog delete/Ac eliminator/72" belt, Subframe connectors, 3.73 Gears '93 LX 4-banger 78k miles

February 25th, 2008, 05:37 PM	#10
jam77 Enthusiast 1987 Mustang GT Join Date: Apr 2007 Location: IL Posts: 685 iTrader: 0 reviews	I have the ps relocation kit and it's pretty sweet, I also have the smog pump eliminator which I bought from summit I can't remember the brand again worked perfectly. As far as the egr I run a block off plate and alot of people will say that you will have problems after eliminating it which is b.s. I have had no issues, it will throw a egr code. __________________ 87 GT, typhoon upper and lower,70mm tb, 90mm maf, bbk shorties, bbk x-pipe, flowmaster cat back, 3:73 gear, pro 5.0 shifter, novi blower,afm power pipe, load IO, Trick Flow heads, Anderson B-31 cam, Anderson PMS, 42 lb injectors, t-rex fuel pump.

February 25th, 2008, 05:53 PM	#12
jam77 Enthusiast 1987 Mustang GT Join Date: Apr 2007 Location: IL Posts: 685 iTrader: 0 reviews	yeah thats what I was saying but if you check your codes you should have a code pop up for egr. Unless you have one of those eliminators plugged into the harness. __________________ 87 GT, typhoon upper and lower,70mm tb, 90mm maf, bbk shorties, bbk x-pipe, flowmaster cat back, 3:73 gear, pro 5.0 shifter, novi blower,afm power pipe, load IO, Trick Flow heads, Anderson B-31 cam, Anderson PMS, 42 lb injectors, t-rex fuel pump.

Threads Similar to: when I do a ac and smog delet.......
Thread	Thread Starter	Forum	Replies	Last Post
CAL smog issues-EGR	five o	5.0 Mustangs	2	February 24th, 2008 12:20 AM
86 gt smog crap	86ttops	5.0 Mustangs	6	September 30th, 2007 09:19 PM
Smog pump help	yellowgt5	5.0 Mustangs	4	May 4th, 2007 03:48 PM
Deleting A/C and smog	Tony_90fox	5.0 Mustangs	33	March 24th, 2007 09:21 PM
Smog Check	NinjaStallion	V6 Mustangs	3	October 4th, 2006 06:35 PM

February 25th, 2008, 04:32 PM	#3
mustangfan1990 Newbie Join Date: Feb 2008 Posts: 30 iTrader: 0 reviews	50resto has one for 40

February 25th, 2008, 04:45 PM	#4
ThreeHonks302 Regular Trans Am WS6 Join Date: Jan 2008 Location: Michigan Posts: 288 iTrader: 0 reviews	to add to his question... I already have an o/r h-pipe so my cats wont clog, but what ports will i need to block off and can i just take the egr spacer off, or is there more of an importance to it more than emissions? Thanks!!!

February 25th, 2008, 04:53 PM	#5
mustangfan1990 Newbie Join Date: Feb 2008 Posts: 30 iTrader: 0 reviews	well there is a ports in the back of your heads that a bolt will screw into to block off. But if your state is strict on emissions then I would keep it with what they say. My state is strict but I have friends in the inspections business so I have a loop hole to slip by

February 25th, 2008, 04:55 PM	#6
ThreeHonks302 Regular Trans Am WS6 Join Date: Jan 2008 Location: Michigan Posts: 288 iTrader: 0 reviews	my state (Michigan) doesnt seem strict at all. So is this the only port with vacuum that I should be worried about or are there more on the EGR spacer?

February 25th, 2008, 05:12 PM	#7
mustangfan1990 Newbie Join Date: Feb 2008 Posts: 30 iTrader: 0 reviews	well the port on the back of the heads arent vacuums. Exhaust comes out of the back of the head. I am not sure about the EGR spacer I dont have one on mine b/c I am running a BBK SSI intake and the intake comes with a place t omount the EGR

February 25th, 2008, 05:15 PM	#8
ThreeHonks302 Regular Trans Am WS6 Join Date: Jan 2008 Location: Michigan Posts: 288 iTrader: 0 reviews	ok so what is the purpose of the EGR if i dont im not goin to run the smog pump?

February 25th, 2008, 05:23 PM	#9
mustangfan1990 Newbie Join Date: Feb 2008 Posts: 30 iTrader: 0 reviews	there isnt a reason except to block off the hole unless you take off teh EGR spacer

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

All times are GMT -4. The time now is 06:56 AM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.