MAF Calibration

ThreeHonks302 · February 25th, 2008, 04:39 PM

I have a 70mm cobra MAF housing with the MAF sensor attached and I need to know if it is calibrated for 19lbs or 24 lbs injectors. The guy i bought this from gave me two sensors and told me that the one that is currently on it is for 19 lb and the one that is by itself is calibrated for 24 lb. Can the sensor alone be calibrated for the injectors, I thought it had something to do with the housing??? What I am asking is can I simply switch the sensor over to change the injector calibration, or was he bsing me????

mustangfan1990 · February 25th, 2008, 04:42 PM

he is right. You can just change the sensor. If it was a cobra MAF it should already be calb. for 24s considering a 93 cobra came with 24s stock, but if he replaced it for 19 just swap it to the 24s and you should be fine

ThreeHonks302 · February 25th, 2008, 04:45 PM

ok thanks very much, i wasnt sure

mustangfan1990 · February 25th, 2008, 04:51 PM

np

February 25th, 2008, 04:39 PM	#1
ThreeHonks302 Regular 1986 Mustang GT Join Date: Jan 2008 Location: Michigan Posts: 263	MAF Calibration I have a 70mm cobra MAF housing with the MAF sensor attached and I need to know if it is calibrated for 19lbs or 24 lbs injectors. The guy i bought this from gave me two sensors and told me that the one that is currently on it is for 19 lb and the one that is by itself is calibrated for 24 lb. Can the sensor alone be calibrated for the injectors, I thought it had something to do with the housing??? What I am asking is can I simply switch the sensor over to change the injector calibration, or was he bsing me????

Threads Similar to: MAF Calibration
Thread	Thread Starter	Forum	Replies	Last Post
77mm Mass Air Calibration	shawn91stang	5.0 Mustangs	6	March 26th, 2007 07:41 PM
speedometer calibration question	ponyexpress02	99-04	1	March 20th, 2007 10:00 PM
calibration code	MyLittlePony	2005+	2	March 3rd, 2007 03:26 PM
calibration number?	daleboeski	96-98	2	August 11th, 2006 07:44 PM

February 25th, 2008, 04:42 PM	#2
mustangfan1990 Newbie Join Date: Feb 2008 Posts: 30	he is right. You can just change the sensor. If it was a cobra MAF it should already be calb. for 24s considering a 93 cobra came with 24s stock, but if he replaced it for 19 just swap it to the 24s and you should be fine

February 25th, 2008, 04:45 PM	#3
ThreeHonks302 Regular 1986 Mustang GT Join Date: Jan 2008 Location: Michigan Posts: 263	ok thanks very much, i wasnt sure

February 25th, 2008, 04:51 PM	#4
mustangfan1990 Newbie Join Date: Feb 2008 Posts: 30	np

All times are GMT -4. The time now is 09:41 PM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.