head intake question???

jrh_1980 · March 16th, 2008, 02:07 AM

I put on my heads and started to bolt down my intake when i realized there is a coolant hole in the heads and intake that isn't in the 1262 gasket i am matching them to. What do i do? cut it out, leave it, does it even matter?

e3sean · March 16th, 2008, 02:39 AM

are u sure it goes all the way into the intake and heads?? if cooland flows through there u shouldnt block it off..

1slo5.0 · March 16th, 2008, 02:59 AM

Originally Posted by jrh_1980

I put on my heads and started to bolt down my intake when i realized there is a coolant hole in the heads and intake that isn't in the 1262 gasket i am matching them to. What do i do? cut it out, leave it, does it even matter?

In the back of the heads? Don't worry about it because your intake doesn't have a rear coolant crossover, that is why the gasket isn't cut for it.

e3sean · March 16th, 2008, 03:52 AM

Originally Posted by Darrell

In the back of the heads? Don't worry about it because your intake doesn't have a rear coolant crossover, that is why the gasket isn't cut for it.

thanks darrell i knew one side was blocked off but i couldnt remember if it was the front or the back..

March 16th, 2008, 02:07 AM	#1
jrh_1980 Regular 89 Mustang LX 7.90@90mph 8th Join Date: Feb 2008 Location: Macomb, Illinois Posts: 151 iTrader: 1 reviews	head intake question??? I put on my heads and started to bolt down my intake when i realized there is a coolant hole in the heads and intake that isn't in the 1262 gasket i am matching them to. What do i do? cut it out, leave it, does it even matter?

March 16th, 2008, 02:39 AM	#2
e3sean I Post Entirely Way Too Much 1988 lx 9.68@142 Join Date: Nov 2007 Location: goldsboro NC Posts: 5,596 iTrader: 0 reviews	are u sure it goes all the way into the intake and heads?? if cooland flows through there u shouldnt block it off.. __________________

Threads Similar to: head intake question???
Thread	Thread Starter	Forum	Replies	Last Post
Stock head and Intake Porting	GizmosMustang	5.0 Mustangs	21	May 3rd, 2007 11:29 PM
Ford explorer head and intake	nasty92LX	5.0 Mustangs	16	March 22nd, 2007 12:53 PM
intake head combo?	kratos2250	5.0 Mustangs	4	March 16th, 2007 12:24 AM
Full PI head/intake swap or Find new PI motor?	96PonyGT	96-98	7	January 3rd, 2007 09:10 AM
PI Head Question	97ponylover	Modular Mustangs	1	September 23rd, 2006 07:10 AM

Remove Advertisements Sponsored Links
Forums at Modded Mustangs Advertisement Advertisement

All times are GMT -4. The time now is 08:27 AM.
Contact Us - Modded Mustangs - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.