Who makes good thru-floor subframe connectors?

Mike Johnson · March 17th, 2008, 12:35 AM

I'm looking at putting in some thru-floor subframe connectors in. I was looking at the wolfe racecraft ones. Who else sells them?

flamed 98 gt · March 17th, 2008, 12:44 AM

Team Z does but I was looking a the Wolfe ones also.

monkeyman437 · March 17th, 2008, 02:22 AM

autoweldchassis.com, check out there website.

e3sean · March 17th, 2008, 03:11 AM

just go to the steel yard and get two leinghts of 2x3" steel...

PJC Racing · March 17th, 2008, 04:10 AM

Team Z Motorsports

Mike Johnson · March 17th, 2008, 09:53 PM

I can't seem to find them on team z's website?

HMUSN · March 17th, 2008, 09:53 PM

Mustang Mini-tub kits, street and race front and rear supension components - Team Z Motorsports

PJC Racing · March 18th, 2008, 08:55 PM

Contact Dave through the site, he is still upgrading the site and not everything is on there.

ChrisJ · March 18th, 2008, 09:00 PM

The BEST!

Griggs Racing Products

Hunt_chevs · March 18th, 2008, 10:07 PM

whats the difference between weld in, and through floor s/f's

Mike Johnson · March 18th, 2008, 10:25 PM

Originally Posted by Hunt_chevs

whats the difference between weld in, and through floor s/f's

Weld in you just weld them to your front and rear subframes. Through floor you actually cut part of the floor of the car out and they also tie into your rockers.

Does anyone know how much the Team Z thru floor connectors are?

HACKGT350 · March 19th, 2008, 11:53 AM

im just gunna go with the maximum motorsports full length sub frames they weld and bold in and from what i have heard they are very very good

PJC Racing · March 25th, 2008, 04:13 AM

Originally Posted by Mike Johnson

Does anyone know how much the Team Z thru floor connectors are?

Bought mine last year so I am not certain on the price but I'm thinking they were $175.

5mustang0 · March 25th, 2008, 10:02 AM

i just did this to my car but i didn't buy mine i made them it wasn't that hard at all just buy some steel i think mine was 2x2 and cut it to length i can try and get some pictures up today if you would like

Mike Johnson · March 25th, 2008, 06:21 PM

I got an email back from Team Z and they said they no longer are making them. So it looks like I'll be going with the wolfe ones.

e3sean · March 25th, 2008, 11:23 PM

just go buy like 2 six foot leinghts of 2"x2" square steel tubing and save like $150 and u can buy stronger steel. there is a guy on here with a white stang that had a whole crap load of pics and it looked great...

PJC Racing · March 26th, 2008, 04:37 AM

Originally Posted by Mike Johnson

I got an email back from Team Z and they said they no longer are making them.

Wow, wonder why? Maybe not enough demand.

mustangfu · March 26th, 2008, 11:55 AM

Well they're not through-floor, but I found these:
Full-Length Subframe Connectors - '79-'04 Ford Mustang

March 17th, 2008, 12:35 AM	#1
Mike Johnson Regular 1997 Mustang V6 Join Date: Feb 2008 Location: Sioux City, Iowa Posts: 150 Blog Entries: 1 iTrader: 0 reviews	Who makes good thru-floor subframe connectors? I'm looking at putting in some thru-floor subframe connectors in. I was looking at the wolfe racecraft ones. Who else sells them? __________________ 97 Coupe 3.8L V6 5spd \| Daily Driver 01 F-250 7.3L Diesel 6spd \| Expensive Daily Driver

March 17th, 2008, 03:11 AM	#4
e3sean I Post Entirely Way Too Much 1988 lx 9.68@142 Join Date: Nov 2007 Location: goldsboro NC Posts: 5,599 iTrader: 0 reviews	just go to the steel yard and get two leinghts of 2x3" steel... __________________

March 17th, 2008, 04:10 AM	#5
PJC Racing Regular Join Date: Feb 2008 Location: Tampa, Fl Posts: 104 iTrader: 0 reviews	Team Z Motorsports __________________ 89 LX Coupe: Factory 5.0, common performance and suspension bolt-ons (306 build inprogress) 86 GT: (current 1/4 project) will have primarily Team Z suspension and chassis additions, 408 with nitrous in the works

March 17th, 2008, 09:53 PM	#6
Mike Johnson Regular 1997 Mustang V6 Join Date: Feb 2008 Location: Sioux City, Iowa Posts: 150 Blog Entries: 1 iTrader: 0 reviews	I can't seem to find them on team z's website? __________________ 97 Coupe 3.8L V6 5spd \| Daily Driver 01 F-250 7.3L Diesel 6spd \| Expensive Daily Driver

March 17th, 2008, 09:53 PM	#7
HMUSN Doc 1986 SVO Join Date: Nov 2006 Posts: 36,836 iTrader: 9 reviews	Mustang Mini-tub kits, street and race front and rear supension components - Team Z Motorsports __________________

March 17th, 2008, 12:44 AM	#2
flamed 98 gt Regular 1990 5.0 LX Notch Join Date: Sep 2006 Location: The Colony, TX Posts: 375 iTrader: 0 reviews	Team Z does but I was looking a the Wolfe ones also.

March 17th, 2008, 02:22 AM	#3
monkeyman437 Newbie 1986 mustang 9.86 Join Date: Oct 2007 Location: P.A. Posts: 26 iTrader: 0 reviews	autoweldchassis.com, check out there website.

March 18th, 2008, 08:55 PM	#8
PJC Racing Regular Join Date: Feb 2008 Location: Tampa, Fl Posts: 104 iTrader: 0 reviews	Contact Dave through the site, he is still upgrading the site and not everything is on there. __________________ 89 LX Coupe: Factory 5.0, common performance and suspension bolt-ons (306 build inprogress) 86 GT: (current 1/4 project) will have primarily Team Z suspension and chassis additions, 408 with nitrous in the works

March 18th, 2008, 09:00 PM	#9
ChrisJ RLY SRS Join Date: Aug 2005 Location: Ft. Meade, MD Posts: 36,743 Blog Entries: 4 iTrader: 9 reviews	The BEST! Griggs Racing Products __________________ 2008 Acura TL Type-S - 2008 EB Ford Expedition - 2002 Boosted GT - Sold Facebook Google+

March 18th, 2008, 10:07 PM	#10
Hunt_chevs Hardcore Enthusiast 2002 Gt Not Slow Join Date: Aug 2007 Location: SJ-CA, 50-ft elev. Posts: 1,658 iTrader: 1 reviews	whats the difference between weld in, and through floor s/f's

March 19th, 2008, 11:53 AM	#12
HACKGT350 Regular Join Date: Apr 2007 Posts: 81 iTrader: 0 reviews	im just gunna go with the maximum motorsports full length sub frames they weld and bold in and from what i have heard they are very very good

March 25th, 2008, 10:02 AM	#14
5mustang0 Regular Join Date: May 2007 Location: Ohio Posts: 253 iTrader: 0 reviews	i just did this to my car but i didn't buy mine i made them it wasn't that hard at all just buy some steel i think mine was 2x2 and cut it to length i can try and get some pictures up today if you would like

March 25th, 2008, 06:21 PM	#15
Mike Johnson Regular 1997 Mustang V6 Join Date: Feb 2008 Location: Sioux City, Iowa Posts: 150 Blog Entries: 1 iTrader: 0 reviews	I got an email back from Team Z and they said they no longer are making them. So it looks like I'll be going with the wolfe ones. __________________ 97 Coupe 3.8L V6 5spd \| Daily Driver 01 F-250 7.3L Diesel 6spd \| Expensive Daily Driver

March 25th, 2008, 11:23 PM	#16
e3sean I Post Entirely Way Too Much 1988 lx 9.68@142 Join Date: Nov 2007 Location: goldsboro NC Posts: 5,599 iTrader: 0 reviews	just go buy like 2 six foot leinghts of 2"x2" square steel tubing and save like $150 and u can buy stronger steel. there is a guy on here with a white stang that had a whole crap load of pics and it looked great... __________________

Remove Advertisements Sponsored Links
Forums at Modded Mustangs Advertisement Advertisement

Threads Similar to: Who makes good thru-floor subframe connectors?
Thread	Thread Starter	Forum	Replies	Last Post
subframe connectors	5mustang0	5.0 Mustangs	10	January 19th, 2008 04:16 PM
MIG vs. TIG For Subframe Connectors	Devine	5.0 Mustangs	9	December 1st, 2007 11:57 PM
Subframe Connectors	gotboost562	5.0 Mustangs	42	September 13th, 2007 01:17 AM
Subframe connectors on my 6	tjames	V6 Mustangs	5	September 11th, 2007 06:15 PM
Subframe connectors	Drick	5.0 Mustangs	10	May 9th, 2007 02:18 AM

All times are GMT -4. The time now is 08:28 PM.
Contact Us - Modded Mustangs - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.