New Project Toy... Lets Hear Some Ideas

89StangGT · October 11th, 2006, 06:47 PM

well guys, today i was approached by a buddy, with a deal i well..lets just say could not pass up. so i now have myself a new rolling chassis to play around with. my 89 is my daily driver, so i figured we do mild to wild street strip with this, since its already prepped with a nice 8 point cage, fuel cell, holley fuel system, and ect. so what ideas do you guys have? i have a 355ci small block chevy sitting in my garage that would be fun to put in it..whats your thoughts? 302? 347? 351? 408? C4? T5? 4.10s? 4.30s? gimme some ideas guys!

Tony_90fox · October 11th, 2006, 07:19 PM

i would say a stroker setup with 4:10s. when i get the money, that is what i am doing with mine. any way you go, you should have fun with it. Do what you want to do though. Dont let people influence you too much. get some good ideas and then make your decision. Have fun, looks like you are on a great start to making this car fun already!

Haggis13 · October 11th, 2006, 07:36 PM

I always wanted a 351 Crate motor with a Tremec 5 speed. 3:73's or 4:10's in the rear with a NOS shot when things get hairy! The cage'll sure make for a nice stiff chassis.

Go man go!

89StangGT · October 11th, 2006, 10:01 PM

im thinking a AFR 347 T5 set up with 4.10s and a 28 tall tire.

5-0stank · October 11th, 2006, 10:04 PM

408 stroker is a great combo for the money...very potent. and if your car is gonna be strip only or mostly strip, build up an auto trans w/ decent stall conv.

99mustang232 · October 11th, 2006, 10:15 PM

BBF

89StangGT · October 12th, 2006, 01:44 PM

i think were gonna go the 347 route with a built c4 and 4.10s

Doc · October 12th, 2006, 04:17 PM

then sell me that chebbie unit! I have an S10 in dire need of some balls. the poor old 2.2L 4 banger is about to give the hell up and go home, and the automatic has been built 6 times over. I need a heart transplant for the little truck.

Doc

October 11th, 2006, 06:47 PM	#1
89StangGT Moderator Join Date: Aug 2006 Location: Toledo Ohio Posts: 788	New Project Toy... Lets Hear Some Ideas well guys, today i was approached by a buddy, with a deal i well..lets just say could not pass up. so i now have myself a new rolling chassis to play around with. my 89 is my daily driver, so i figured we do mild to wild street strip with this, since its already prepped with a nice 8 point cage, fuel cell, holley fuel system, and ect. so what ideas do you guys have? i have a 355ci small block chevy sitting in my garage that would be fun to put in it..whats your thoughts? 302? 347? 351? 408? C4? T5? 4.10s? 4.30s? gimme some ideas guys! __________________ I NEED A NEW MUSTANG PROJECT! 1987-1993 ROLLER WANTED! BRING SLICKS..NOT EXCUSES

October 11th, 2006, 07:19 PM	#2
Tony_90fox MM Fanatic Join Date: Jun 2006 Location: Bowling Green, KY Posts: 3,445	i would say a stroker setup with 4:10s. when i get the money, that is what i am doing with mine. any way you go, you should have fun with it. Do what you want to do though. Dont let people influence you too much. get some good ideas and then make your decision. Have fun, looks like you are on a great start to making this car fun already! __________________ Suck on it Trebek. Suck it long, suck it hard.

October 11th, 2006, 07:36 PM	#3
Haggis13 Regular 1993 Mustang GT Join Date: Sep 2006 Location: Ottawa, Ontario, Canada Posts: 478	I always wanted a 351 Crate motor with a Tremec 5 speed. 3:73's or 4:10's in the rear with a NOS shot when things get hairy! The cage'll sure make for a nice stiff chassis. Go man go! __________________ Bart 93 Black on Black GT Kenne Bell S/C

October 11th, 2006, 10:01 PM	#4
89StangGT Moderator Join Date: Aug 2006 Location: Toledo Ohio Posts: 788	im thinking a AFR 347 T5 set up with 4.10s and a 28 tall tire. __________________ I NEED A NEW MUSTANG PROJECT! 1987-1993 ROLLER WANTED! BRING SLICKS..NOT EXCUSES

October 11th, 2006, 10:04 PM	#5
5-0stank Enthusiast Join Date: Sep 2006 Location: emmaus, pa Posts: 508	408 stroker is a great combo for the money...very potent. and if your car is gonna be strip only or mostly strip, build up an auto trans w/ decent stall conv. __________________ 1995 GT 5-Speed: 14.4 @ 96.1mph

October 11th, 2006, 10:15 PM	#6
99mustang232 MM Fanatic 1999 Ford Mustang V6 Join Date: Sep 2005 Location: newport news, va Posts: 3,719	BBF __________________ ...even fire and single cammin

October 12th, 2006, 01:44 PM	#7
89StangGT Moderator Join Date: Aug 2006 Location: Toledo Ohio Posts: 788	i think were gonna go the 347 route with a built c4 and 4.10s __________________ I NEED A NEW MUSTANG PROJECT! 1987-1993 ROLLER WANTED! BRING SLICKS..NOT EXCUSES

October 12th, 2006, 04:17 PM	#8
Doc Newbie Join Date: Oct 2006 Posts: 20	then sell me that chebbie unit! I have an S10 in dire need of some balls. the poor old 2.2L 4 banger is about to give the hell up and go home, and the automatic has been built 6 times over. I need a heart transplant for the little truck. Doc

Threads Similar to: New Project Toy... Lets Hear Some Ideas
Thread	Thread Starter	Forum	Replies	Last Post
Anyone hear about this??	TurboLX	The Clubhouse	22	August 16th, 2007 06:17 PM
Hear before you buy!	YearOne	Modular Mustangs	6	April 17th, 2007 10:23 PM
MM+FF PROJECT CAR F/S 86 notch project frightning	kaboom	For Sale	2	February 4th, 2007 04:33 AM
What's This I Hear About Joe?	2000Si	The Clubhouse	245	November 4th, 2006 01:00 AM
hear me before you can see me	AtlanticBlue99	The Clubhouse	31	February 11th, 2006 10:28 PM

All times are GMT -4. The time now is 11:29 PM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.