heads

chickenbot · May 16th, 2008, 12:11 AM

do you think the trick flow tw heads would be better than my stock heads on my 90 gt.. ive already got the tf upper and lower intake, 70mm accufab tb and egr spacer and a 76mm straight shot mac performance intake.. im also about to up the fi to 24lbs and get a fuel pressure reg and i havent made up my mind on the pump yet(190 or 255).. what do yall think?

1982matthew · May 16th, 2008, 12:18 AM

I run the trick flow heads with trick flow intakes and cam and love it. I run 30lb injectors and i would have to say go with the 24lb'ers. I also have the 255 and would go bigger and if I were you go better and have room to grow instead of having to buy another pump or injectors if you keep doing mods.

fogged306 · May 16th, 2008, 12:18 AM

Yea much better. The stock e7 heads are the downfall of these motors. I wouldn't upgrade to the 24# injectors until you change the heads.

chickenbot · May 16th, 2008, 12:20 AM

what do you recommend w/ the tf heads?

fogged306 · May 16th, 2008, 12:23 AM

The 24's are perfect for the TW's, just don't install them when you still have the stock heads, it wont do you any good. Put them in at the same time you put the TW's in.

chickenbot · May 16th, 2008, 12:25 AM

do you think im under powered due to the larger intake?

fogged306 · May 16th, 2008, 12:41 AM

I couldn't tell you for sure there. You might be hurting yourself with that intake and stock heads, you might not. The difference will be minimal at best anyway. If Tmoss drops by he could answer that better than most.

ujslost · May 16th, 2008, 07:53 AM

Depends on which trickflow intake you have now. Is it a track heat or street heat??

Darrell · May 16th, 2008, 11:13 PM

Originally Posted by chickenbot

do you think the trick flow tw heads would be better than my stock heads on my 90 gt.. ive already got the tf upper and lower intake, 70mm accufab tb and egr spacer and a 76mm straight shot mac performance intake.. im also about to up the fi to 24lbs and get a fuel pressure reg and i havent made up my mind on the pump yet(190 or 255).. what do yall think?

Ummmmmm yeah, they would be alot better.

chickenbot · May 16th, 2008, 11:40 PM

Originally Posted by ujslost

Depends on which trickflow intake you have now. Is it a track heat or street heat??

track

chickenbot · May 18th, 2008, 04:27 PM

so if i were to get the tw heads.. what else should i do to the motor?

aslo what kind of heads should i get Trick Flow Twisted Wedge Street Cylinder Heads for Small Block Ford - trickflow.com

chickenbot · May 18th, 2008, 09:35 PM

http://www.trickflow.com/largeimage....t=TFS-5171B001
these look good for my app?

chickenbot · May 18th, 2008, 09:36 PM

Trick Flow High Port Street/Strip Cylinder Heads for Small Block Ford: TFS-5171B001 - trickflow.com
these look good for my app?

Iownastang · May 18th, 2008, 09:49 PM

You dont need damn high ports for a mild 302 they require special headers and the valve cover rail is raised.

stick with the standard tw head

Trick Flow Specialties TFS-51400004 - Trick Flow Twisted Wedge Street Cylinder Heads for Small Block Ford - summitracing.com

bigger is not always better

chickenbot · May 18th, 2008, 10:37 PM

do i need to do anything to the pistons with the heads and also what cam should i buy too

Iownastang · May 18th, 2008, 10:46 PM

The heads will work fine with the stock pistons, i would probably call a cam grinder for a custom grind or go with the trick flow stage 1 cam.

chickenbot · May 18th, 2008, 11:07 PM

http://www.trickflow.com/egnsearch.a...=KeywordSearch

which one would that be?

Iownastang · May 18th, 2008, 11:09 PM

Originally Posted by chickenbot

Trick Flow Specialties, Camshafts - trickflow.com

which one would that be?

The very first one I know it is not a custom grind but is better than the abc cams.

.499.510

chickenbot · May 19th, 2008, 01:52 AM

what kind of push rods and rockers would you recommend?

May 16th, 2008, 12:11 AM	#1
chickenbot Regular Join Date: Nov 2007 Location: camp pendleton, ca Posts: 229	heads do you think the trick flow tw heads would be better than my stock heads on my 90 gt.. ive already got the tf upper and lower intake, 70mm accufab tb and egr spacer and a 76mm straight shot mac performance intake.. im also about to up the fi to 24lbs and get a fuel pressure reg and i havent made up my mind on the pump yet(190 or 255).. what do yall think? __________________ 1990 gt 5.0 Mac Performance 76mm straight shot intake 70mm Accufab tb and egr spacer Trick Flow Track Heat u/l intake 3.55 gears MSD distributor, Blaster Coil, and 8.5mm wires

May 16th, 2008, 12:18 AM	#3
fogged306 Enthusiast 89 GT Join Date: Apr 2007 Location: Did you get that thing I sent you? Posts: 916	Yea much better. The stock e7 heads are the downfall of these motors. I wouldn't upgrade to the 24# injectors until you change the heads. __________________ Parts needed: TwEECer, if anyone has one for cheap. 70mm TB Full length headers and matching h-pipe For sale: Ford Racing E-303 cam brand new BBK 65mm TB, brand new BBK equal length shortys brand new BBK off road x-pipe for shortys used

May 16th, 2008, 12:20 AM	#4
chickenbot Regular Join Date: Nov 2007 Location: camp pendleton, ca Posts: 229	what do you recommend w/ the tf heads? __________________ 1990 gt 5.0 Mac Performance 76mm straight shot intake 70mm Accufab tb and egr spacer Trick Flow Track Heat u/l intake 3.55 gears MSD distributor, Blaster Coil, and 8.5mm wires

May 16th, 2008, 12:23 AM	#5
fogged306 Enthusiast 89 GT Join Date: Apr 2007 Location: Did you get that thing I sent you? Posts: 916	The 24's are perfect for the TW's, just don't install them when you still have the stock heads, it wont do you any good. Put them in at the same time you put the TW's in. __________________ Parts needed: TwEECer, if anyone has one for cheap. 70mm TB Full length headers and matching h-pipe For sale: Ford Racing E-303 cam brand new BBK 65mm TB, brand new BBK equal length shortys brand new BBK off road x-pipe for shortys used

May 16th, 2008, 12:25 AM	#6
chickenbot Regular Join Date: Nov 2007 Location: camp pendleton, ca Posts: 229	do you think im under powered due to the larger intake? __________________ 1990 gt 5.0 Mac Performance 76mm straight shot intake 70mm Accufab tb and egr spacer Trick Flow Track Heat u/l intake 3.55 gears MSD distributor, Blaster Coil, and 8.5mm wires

May 16th, 2008, 12:18 AM	#2
1982matthew Regular 1993 GT 13.2@105 Join Date: Mar 2008 Location: Nazareth, Pa Posts: 169	I run the trick flow heads with trick flow intakes and cam and love it. I run 30lb injectors and i would have to say go with the 24lb'ers. I also have the 255 and would go bigger and if I were you go better and have room to grow instead of having to buy another pump or injectors if you keep doing mods.

May 16th, 2008, 12:41 AM	#7
fogged306 Enthusiast 89 GT Join Date: Apr 2007 Location: Did you get that thing I sent you? Posts: 916	I couldn't tell you for sure there. You might be hurting yourself with that intake and stock heads, you might not. The difference will be minimal at best anyway. If Tmoss drops by he could answer that better than most. __________________ Parts needed: TwEECer, if anyone has one for cheap. 70mm TB Full length headers and matching h-pipe For sale: Ford Racing E-303 cam brand new BBK 65mm TB, brand new BBK equal length shortys brand new BBK off road x-pipe for shortys used

May 16th, 2008, 07:53 AM	#8
ujslost MM Fanatic Join Date: Mar 2007 Location: Albertville, AL Posts: 3,703	Depends on which trickflow intake you have now. Is it a track heat or street heat?? __________________ 1997 Mustang Gt Convertible for sale. Triple black, great condition and unmolested! http://www.moddedmustangs.com/forums...like-most.html

May 18th, 2008, 04:27 PM	#11
chickenbot Regular Join Date: Nov 2007 Location: camp pendleton, ca Posts: 229	so if i were to get the tw heads.. what else should i do to the motor? aslo what kind of heads should i get Trick Flow Twisted Wedge Street Cylinder Heads for Small Block Ford - trickflow.com __________________ 1990 gt 5.0 Mac Performance 76mm straight shot intake 70mm Accufab tb and egr spacer Trick Flow Track Heat u/l intake 3.55 gears MSD distributor, Blaster Coil, and 8.5mm wires Last edited by chickenbot : May 18th, 2008 at 04:31 PM.

May 18th, 2008, 09:35 PM	#12
chickenbot Regular Join Date: Nov 2007 Location: camp pendleton, ca Posts: 229	http://www.trickflow.com/largeimage....t=TFS-5171B001 these look good for my app? __________________ 1990 gt 5.0 Mac Performance 76mm straight shot intake 70mm Accufab tb and egr spacer Trick Flow Track Heat u/l intake 3.55 gears MSD distributor, Blaster Coil, and 8.5mm wires

May 18th, 2008, 09:36 PM	#13
chickenbot Regular Join Date: Nov 2007 Location: camp pendleton, ca Posts: 229	Trick Flow High Port Street/Strip Cylinder Heads for Small Block Ford: TFS-5171B001 - trickflow.com these look good for my app? __________________ 1990 gt 5.0 Mac Performance 76mm straight shot intake 70mm Accufab tb and egr spacer Trick Flow Track Heat u/l intake 3.55 gears MSD distributor, Blaster Coil, and 8.5mm wires

May 18th, 2008, 09:49 PM	#14
Iownastang MM Fanatic 1987 ford mustang gt well see when shes done Join Date: May 2007 Location: mascot, tn Posts: 4,490	You dont need damn high ports for a mild 302 they require special headers and the valve cover rail is raised. stick with the standard tw head Trick Flow Specialties TFS-51400004 - Trick Flow Twisted Wedge Street Cylinder Heads for Small Block Ford - summitracing.com bigger is not always better

May 18th, 2008, 10:37 PM	#15
chickenbot Regular Join Date: Nov 2007 Location: camp pendleton, ca Posts: 229	do i need to do anything to the pistons with the heads and also what cam should i buy too __________________ 1990 gt 5.0 Mac Performance 76mm straight shot intake 70mm Accufab tb and egr spacer Trick Flow Track Heat u/l intake 3.55 gears MSD distributor, Blaster Coil, and 8.5mm wires

May 18th, 2008, 10:46 PM	#16
Iownastang MM Fanatic 1987 ford mustang gt well see when shes done Join Date: May 2007 Location: mascot, tn Posts: 4,490	The heads will work fine with the stock pistons, i would probably call a cam grinder for a custom grind or go with the trick flow stage 1 cam.

May 18th, 2008, 11:07 PM	#17
chickenbot Regular Join Date: Nov 2007 Location: camp pendleton, ca Posts: 229	http://www.trickflow.com/egnsearch.a...=KeywordSearch which one would that be? __________________ 1990 gt 5.0 Mac Performance 76mm straight shot intake 70mm Accufab tb and egr spacer Trick Flow Track Heat u/l intake 3.55 gears MSD distributor, Blaster Coil, and 8.5mm wires

Threads Similar to: heads
Thread	Thread Starter	Forum	Replies	Last Post
GT 40 X Heads. Need Help Deciding On These Heads, Or AFR`s	BillR1970	Parts	6	February 27th, 2008 12:31 PM
4V heads Vs 3V heads, and noob Q.	TheUNZippee!	4V / SVT	19	February 5th, 2008 02:17 PM
GT40 heads vs GTP heads	99TurboV6Stang	5.0 Mustangs	9	September 18th, 2007 09:34 PM
RHS heads , are they good cylinder heads?	hitorx	5.0 Mustangs	25	May 12th, 2007 09:55 PM
Boss 302 Heads Same As Cleveland Heads?	ken5_0	Classic Mustangs	8	September 25th, 2006 03:18 PM

All times are GMT -4. The time now is 05:55 PM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.

May 19th, 2008, 01:52 AM	#19
chickenbot Regular Join Date: Nov 2007 Location: camp pendleton, ca Posts: 229	what kind of push rods and rockers would you recommend? __________________ 1990 gt 5.0 Mac Performance 76mm straight shot intake 70mm Accufab tb and egr spacer Trick Flow Track Heat u/l intake 3.55 gears MSD distributor, Blaster Coil, and 8.5mm wires