Putting 95gt motor in 89 GT

drillsgt7 · May 16th, 2008, 09:37 PM

What is needed to put the 95gt Motor into the 89gt. I know that the upper intake is different but what about the accessories on the front of the motor. What all will I have to change out to make this motor work in the 89 GT?

ujslost · May 16th, 2008, 09:45 PM

get a 3g alternator wire harness upgrade or make your own, then extend coil power wires to reach where the coil sets up ontop the AC the rest should work just fine. The distributors are differant cause the 94,95s have the module mouned on the fender below the maf sensor and have a differant harness to the dist. So just use a fox body EFI distributor . I like the 94,95 pulley setup.

Darrell · May 16th, 2008, 10:30 PM

The accessory brackets are different and so is the timing cover. You will either have to use the timing cover and brackets from the 95 engine or use the timing cover and brackets from the 89. You can't interchange the brackets and timing covers between the foxes and SN95 cars.

May 16th, 2008, 09:37 PM	#1
drillsgt7 Newbie Join Date: Feb 2008 Posts: 3	Putting 95gt motor in 89 GT What is needed to put the 95gt Motor into the 89gt. I know that the upper intake is different but what about the accessories on the front of the motor. What all will I have to change out to make this motor work in the 89 GT?

May 16th, 2008, 09:45 PM	#2
ujslost MM Fanatic Join Date: Mar 2007 Location: Albertville, AL Posts: 3,703	get a 3g alternator wire harness upgrade or make your own, then extend coil power wires to reach where the coil sets up ontop the AC the rest should work just fine. The distributors are differant cause the 94,95s have the module mouned on the fender below the maf sensor and have a differant harness to the dist. So just use a fox body EFI distributor . I like the 94,95 pulley setup. __________________ 1997 Mustang Gt Convertible for sale. Triple black, great condition and unmolested! http://www.moddedmustangs.com/forums...like-most.html

May 16th, 2008, 10:30 PM	#3
Darrell MM Ninjas! 1990 Mustang LX 9.36@143 mph Join Date: Jan 2006 Location: Fond du Lac, Wisconsin Posts: 5,797	The accessory brackets are different and so is the timing cover. You will either have to use the timing cover and brackets from the 95 engine or use the timing cover and brackets from the 89. You can't interchange the brackets and timing covers between the foxes and SN95 cars. __________________ Racing in memory of Dave Bandt 11/19/69 - 3/23/08 "he's traded his wheels for wings" Professor of Natural Aspiration Thanks to: Artie at Trick Flow and Harold at Furo Racecraft http://www.myspace.com/odarrellrules

Threads Similar to: Putting 95gt motor in 89 GT
Thread	Thread Starter	Forum	Replies	Last Post
What all to replace when putting new motor in?	silver99gt	99-04	5	March 13th, 2008 09:02 PM
Putting A PI Motor In My 98	98gt760	96-98	10	December 3rd, 2007 12:22 AM
95gt VS 98gt	Damaso	Street	6	June 9th, 2007 11:27 PM
Some pictures of my 95GT	new 5.0	Pictures	4	April 17th, 2007 10:50 AM
Putting 97 cobra motor in 97 gt.	bbrewer03	96-98	2	August 24th, 2006 12:35 AM

All times are GMT -4. The time now is 06:24 PM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.