I'm gettin a good deal on some stuff

blakehunter316 · May 30th, 2008, 06:59 PM

ok so there is a parts store in town that will beet any price i give them and i am going to get a polished cobra upper and lower intake, bigger throttle body 70 or 75mm?? and a 90 mm mass air. sorry i cant get heads yet and want to keep it as ford racing as possible because i like original stuff. but will that help out on power very much? thanks.

e3sean · May 30th, 2008, 07:58 PM

i have a built set of gt40p heads ill sell u that will help u out

91cobra5.0 · May 30th, 2008, 08:09 PM

the intake will help but if ur gona spend the money go with something other than cobra its rated real low like 300 hp i think

vfast · May 30th, 2008, 08:36 PM

why ford racing?????? some of the stuff is made in mexico....the intake you could have extrude hone and port matched..or go with the sweet looking gt-40 intake..whic is what I use on my s/c car

83fox · May 31st, 2008, 12:54 PM

Originally Posted by vfast

why ford racing?????? some of the stuff is made in mexico....the intake you could have extrude hone and port matched..or go with the sweet looking gt-40 intake..whic is what I use on my s/c car

not everything ford made in mexico was bad. id like to have a 302 block from mexico

95opal · May 31st, 2008, 01:47 PM

Originally Posted by vfast

why ford racing?????? some of the stuff is made in mexico....the intake you could have extrude hone and port matched..or go with the sweet looking gt-40 intake..whic is what I use on my s/c car

LOL The new cobra intakes are made in china.

83fox... I agree with ya on the block. As that was the deal back in the day when the aftermarket blocks didnt hit the streets yet.

1989Gt. · May 31st, 2008, 01:53 PM

from what i hear there not even bad.... and i like the orig ford stuff to i like to keep mine orig ....

83fox · May 31st, 2008, 02:02 PM

Originally Posted by 95opal

LOL The new cobra intakes are made in china.

83fox... I agree with ya on the block. As that was the deal back in the day when the aftermarket blocks didnt hit the streets yet.

most of the shit thats made for domestic cars arent usually made in america, but not everything thats non-american made is shit. Even though everything we should be buying SHOULD be made in america haha.

May 30th, 2008, 06:59 PM	#1
blakehunter316 Regular 1989 Mustang GT Join Date: Feb 2008 Location: Connersville Indiana Posts: 238	I'm gettin a good deal on some stuff ok so there is a parts store in town that will beet any price i give them and i am going to get a polished cobra upper and lower intake, bigger throttle body 70 or 75mm?? and a 90 mm mass air. sorry i cant get heads yet and want to keep it as ford racing as possible because i like original stuff. but will that help out on power very much? thanks. __________________ vortech s-trim off road h pipe super 40's steeda tri-ax c.a.i. 3.73s subframe cnntrs 255er

May 30th, 2008, 07:58 PM	#2
e3sean MM Fanatic 1988 lx 5.7 11.6@109 Join Date: Nov 2007 Location: arizona Posts: 3,566	i have a built set of gt40p heads ill sell u that will help u out __________________ the only thing u will be burning by going with a 347 insted of a 331 is the guy driving the 331 MILITARY CREW USAF LUKE AFB AZ, E-5 SELECT 7995 AMMO I.Y.A.A.Y.A.S

May 30th, 2008, 08:09 PM	#3
91cobra5.0 Hardcore Enthusiast 91 mustang 266 ftlbs 191 hp (15.138 @92.91) @5000ft elevation Join Date: Jan 2008 Location: colorado springs Posts: 1,494	the intake will help but if ur gona spend the money go with something other than cobra its rated real low like 300 hp i think __________________ Fender well cold air intake, 3:73's, eibach springs, 65mm TB, electric fans, 3g upgrade, smog delete, advanced timing, MSD cap and rotor, ford racing 9mm plug wires, 75mm Pro-M MAF, flowmaster sieres 40 delta flows

May 30th, 2008, 08:36 PM	#4
vfast Hardcore Enthusiast Join Date: Aug 2005 Location: being voted #1 asshole Posts: 1,075	why ford racing?????? some of the stuff is made in mexico....the intake you could have extrude hone and port matched..or go with the sweet looking gt-40 intake..whic is what I use on my s/c car __________________ EVERYONE IS ENTITLED TO MY OPINION 6'ers are for kids 1965 chevelle SS 421 sbc 6 speed, 3.90 gears,alum d-shaft, brodix heads,roller cam,925 AED carb...grocery getter

Threads Similar to: I'm gettin a good deal on some stuff
Thread	Thread Starter	Forum	Replies	Last Post
good deal or bad deal?	rednsilver91	The Clubhouse	35	November 25th, 2007 11:56 PM
Good Stuff	Goblin	The Clubhouse	0	November 15th, 2007 05:27 PM
Good Stuff!	408gt91	The Clubhouse	9	November 11th, 2007 08:46 PM
good deal or bad deal!!!!!!!!91 coupe and 5.0 engine	kngkahious	5.0 Mustangs	11	June 6th, 2007 02:38 PM
Good deal or No deal???	Hoss	Classic Mustangs	17	January 9th, 2007 10:23 PM

Sponsored Links	Remove Advertisements
Forums at Modded Mustangs Advertisement

May 31st, 2008, 01:53 PM	#7
1989Gt. Regular 1989 Mustang GT Join Date: Apr 2008 Posts: 386	from what i hear there not even bad.... and i like the orig ford stuff to i like to keep mine orig ....

All times are GMT -4. The time now is 11:46 PM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2009, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.