Opinions on set-up!

Burn'nRubber · June 3rd, 2008, 08:44 PM

Im getting ready to start tearing my old heads off and swapping them for a set of gt40p heads, that have recieved a 3 angle valve job, mill, and upgraded springs. The heads have NOT been ported or fitted with oversize valves, because I didnt feel like putting a bunch of money in these heads. Im planning on running a Comp XE270HR cam. Here are the specs: 270 / 276 - .512 / .512 lift. All of this topped off with the my edelbrock performer intake. Sound like a decent combo? Think the stock 19lbers are going to be enough?

Thanks

JBIGBOOTSY · June 3rd, 2008, 08:47 PM

19# are fine.

Haggis13 · June 3rd, 2008, 09:54 PM

Originally Posted by JBIGBOOTSY

19# are fine.

+1

Burn'nRubber · June 3rd, 2008, 11:39 PM

Thanks guys, any ideas of what I should expect from this combo? Id like to see 12s with some good rubber.

95wip · June 3rd, 2008, 11:46 PM

even if your suspension is set up for drag and you still will probably need some help like maybe i don't know a 75 or so shot of nitrous oxide and a good set of slicks? i don't know though

91cobra5.0 · June 3rd, 2008, 11:54 PM

possibly mid to high 12s maybe

vfast · June 4th, 2008, 03:48 PM

why not go with a tfs cam stage one..

93hatch · June 4th, 2008, 03:51 PM

gears good tires good 60' its possible

flattusmaximus78 · June 4th, 2008, 07:19 PM

good combo, with gear its good for 12's.

June 3rd, 2008, 08:44 PM	#1
Burn'nRubber Regular Join Date: Aug 2007 Posts: 142	Opinions on set-up! Im getting ready to start tearing my old heads off and swapping them for a set of gt40p heads, that have recieved a 3 angle valve job, mill, and upgraded springs. The heads have NOT been ported or fitted with oversize valves, because I didnt feel like putting a bunch of money in these heads. Im planning on running a Comp XE270HR cam. Here are the specs: 270 / 276 - .512 / .512 lift. All of this topped off with the my edelbrock performer intake. Sound like a decent combo? Think the stock 19lbers are going to be enough? Thanks __________________ 1992 White GT: Edelbrock Performer intake, BBK 75mm T/B, Holley 190 fuel pump, Pulleys, O/R-H, Flows, 3:73s, Short throw, Full length subframe connectors, lakewood 50/50s, Summit U/L control arms

June 3rd, 2008, 11:39 PM	#4
Burn'nRubber Regular Join Date: Aug 2007 Posts: 142	Thanks guys, any ideas of what I should expect from this combo? Id like to see 12s with some good rubber. __________________ 1992 White GT: Edelbrock Performer intake, BBK 75mm T/B, Holley 190 fuel pump, Pulleys, O/R-H, Flows, 3:73s, Short throw, Full length subframe connectors, lakewood 50/50s, Summit U/L control arms

June 3rd, 2008, 11:46 PM	#5
95wip Regular Join Date: Mar 2007 Location: DownRiver Michigan Posts: 302	even if your suspension is set up for drag and you still will probably need some help like maybe i don't know a 75 or so shot of nitrous oxide and a good set of slicks? i don't know though __________________ 95' GT is being reconstructed!

June 3rd, 2008, 11:54 PM	#6
91cobra5.0 Hardcore Enthusiast 91 mustang 266 ftlbs 191 hp (15.138 @92.91) @5000ft elevation Join Date: Jan 2008 Location: colorado springs Posts: 1,494	possibly mid to high 12s maybe __________________ Fender well cold air intake, 3:73's, eibach springs, 65mm TB, electric fans, 3g upgrade, smog delete, advanced timing, MSD cap and rotor, ford racing 9mm plug wires, 75mm Pro-M MAF, flowmaster sieres 40 delta flows

June 4th, 2008, 03:48 PM	#7
vfast Hardcore Enthusiast Join Date: Aug 2005 Location: being voted #1 asshole Posts: 1,075	why not go with a tfs cam stage one.. __________________ EVERYONE IS ENTITLED TO MY OPINION 6'ers are for kids 1965 chevelle SS 421 sbc 6 speed, 3.90 gears,alum d-shaft, brodix heads,roller cam,925 AED carb...grocery getter

Sponsored Links	Remove Advertisements
Forums at Modded Mustangs Advertisement

June 3rd, 2008, 08:47 PM	#2
JBIGBOOTSY Hardcore Enthusiast 1990 LX hatch Join Date: Aug 2006 Location: Hobart Indiana Posts: 2,065	19# are fine.

June 4th, 2008, 03:51 PM	#8
93hatch Hardcore Enthusiast 1993 Lx Skittle fast@taste the rainbow Join Date: Jan 2008 Location: sitting on my hand Posts: 2,868	gears good tires good 60' its possible __________________ Greatest fail of MM's history http://www.moddedmustangs.com/forums...icer-page.html

June 4th, 2008, 07:19 PM	#9
flattusmaximus78 MM Fanatic 1993 5.ohhhh 14.47 at 96 mph Join Date: Apr 2006 Location: Gatorland Posts: 3,128	good combo, with gear its good for 12's. __________________ 302 h/c/i

Threads Similar to: Opinions on set-up!
Thread	Thread Starter	Forum	Replies	Last Post
Set Up Opinions	94gt	5.0 Mustangs	22	May 9th, 2008 10:36 PM
Set up Opinions	94gt	94-95	0	April 5th, 2008 05:34 AM
Anyone Want A Set Of 3.73?	GTSilver	99-04	29	October 14th, 2007 09:24 PM
What do You Think of this set-up?	Stroke My GT	Exhaust	1	July 31st, 2007 04:37 AM
going to be my set up what do you think	fastlane_24	94-95	4	July 9th, 2007 04:45 PM

All times are GMT -4. The time now is 03:34 AM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2009, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.